Interface communication boards

shentek releases 1 port RS422/485 ExpressCard supports 921.2Kbps and it works for 34mm and 54mm ExpressCard Slot. With this card, it can add 1 port Serial RS-422(Point to Point Mode), or 2 Wire RS-485 or 4 Wire RS-485(RS-422 Multi-drop ...

24 Vdc power supply Operating temperature: -40?C ~ +85?C 16 opto coupled digital inputs, with debounce filter and presettable pulse counters 12 fast pulse counter on digital inputs 6 dedicated up/down counters for quadrature encoders 16 ...

The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation. The protocol stack is executed autonomously on the PC card and process data exchange with the host is done ...

GSM/GPRS communication module. Compatible with Pro series control panels Astra-712 Pro, Astra-812 Pro, Astra-8945 Pro. Supports sending information to monitoring stations in Contact ID, Argus-ST, PRO-net and SIA-IP protocols. Supports ...

2 ports RS232 (Port3 +Port 4) communication module

The EA pluggable interface cards, represent a unified solution for current and future devices, and can be used in various situations. They feature a simple "plug&play" installation procedure (some restrictions must be observed when using ...

The CP371 is the ideal solution for use in all kinds of applications that need analog interfacing. It has 1 LSB basic accuracy and a selection of 8 channels and a 12 bit resolution. The CP371 is very reliable even when being used in the ...

Power supply 8-35Vd.c. Operating temperature -40? C ~ +85? C 16 Inputs opto couple 16 counters on digital inputs 8 counters up/down for quadrature encoder in 16 outputs by rel? 16 analog inputs 0-10V 4 analog outputs 0-5V Configuration ...

Matrox Concord is a family of Gigabit Ethernet network interface cards (NICs) and IEEE 1394b adaptors that are pre-licensed for use with the Matrox Imaging Library (MIL) drivers for the GigE Vision? and IEEE 1394 IIDC protocols. Key Features ...

Offers high-performance, high-capacity control-plane and user-plane testing of LTE, VoIP and IMS networks. Realistic Wireless and Wireline Converged Testing The W2CM-10GbE is designed to meet the challenging needs of testing fixed-mobile ...

The MCAN-1020 is engineered around the ARM7 highly integrated microcontroller. This ARM7TDMI-S processor has very low power consumption and features 512 kB of on-chip high-speed flash memory. It incorporates several communications ...

CAN 2.0A and CAN 2.0B supported Two independent CAN communication ports CAN transfer rate up to 1 Mbps 2 kV electrical isolation LED for transmit/receive status on each port Optional 120 ohm terminal resistor for CAN bus network DLL library ...

Native connectivity to any I/O link equipped Fanuc controllers including late model 16 /18 controls and all i-series models. Simple Phoenix style quick disconnect connectors MTConnect Compliant V1.2. Field upgradeable to newer releases Plug ...

Digital triggering and external clocking with a defined range that is generated by a controller and sent to a controlled device. NI PCI-6713 has 8 channels and 8 (5 V TTL/CMOS) digital I/O lines. Designed with 2 up/down counter/timers, ...

The 2102 Wireless Module reduces the need for confined space entry in sewer flow studies by providing remote data retrieval from monitoring instruments. Simply clip the 2102 onto one or more 2100 Series flow modules to form a complete, ...

Memex Inc. introduces CNC connectivity with Machine Monitoring (OEE) + Control (DNC). OEE + DNC delivers Productivity Enhancements while Reducing Operating Costs. Ax9150 is the first product to utilize the revolutionary way part programs ...

The I/O expansion board, which is manufactured by KSE, is a DIN rail expansion board from 8 IOs up to 64 IOs. Connections to KSE controllers can either be through RS232, RS422, RS485 or CAN bus. The unit has an operating temperature ranging ...

2 16-bit analog components (833 kS/s); 24 electronic digital I/O; 32-bit counters NIST-traceable standardization certification and over 70 transmission conditioning alternatives Correlated DIO (8 clocked lines, 1 MHz) ...

Process coupling: Fiber optic board Channel Simatic (Duplex Fiber Optics) for one TDC Connection (640 Mbit/sec) Technical Specifications: Manufacturer: iba AG Interface to Simatic TDC Parallel Rack Coupling Request-mode ...

TIC 020 is a TAP Interface Card (TIC) for the SCANFLEX boundary-scan hardware platform. The module features a programmable multi-bus interface that is compatible with numerous test and debug protocols and target interfaces, including ...

The RocketPort?, the league-leader in manufacturing high-performance, cost-effective serial port cards, recently broadened the quantity of I/O devices that one can connect and manage from a PC. In addition, there is a vast array of port ...

KCU-01 is an optional expandable module which allows you to remotely monitor and control specific KUTAI ATS and Generator controllers using PC or laptop. Quick connection through a USB cable.

60 VDC constant financial institution solitude, 1,400 Vrms/1,950 VDC station-to-shuttle solitude endure for five s 4 analogue outputs (?10 V), 16-little bit quality, as much as 500 kS/s 6 electronic enter and 4 electronic productivity, ...

Digital Boundary Scan I/O Module with 96 channels, based on G?PEL electronic?s CION? component. 3U/1Slot instrument, groups of 32 channels each are voltage programmable between 1.8 and 5 V. Each channel can independently be configured ...

The COMTROL RocketPort INFINITY DB25M PCI is a serial card. This equipment is deisgned with 4 port serial card. The INFINITY DB25M PCI provides the four ports that is used as an additional in-server serial connectivity. In addition to ...

KCU-02 is an optional expandable module which allows you to remotely monitor and control specific KUTAI ATS and Generator controllers using PC or laptop. Quick connection through a RS-485 cable.

60 VDC constant financial institution solitude, 1,400 Vrms/1,950 VDC station-to-shuttle solitude endure for five s 2 analogue outputs ( to 20 mA), 16-little bit quality, as much as 500 kS/s 6 electronic enter and 4 electronic productivity, ...

KCU-30 is an optional expandable module which allows you to remotely monitor and control specific KUTAI ATS and Generator controllers using PC, laptop, tablet, or smartphone. Quick connection through an Ethernet cable.

KCU-40 is an optional expandable module which allows you to remotely monitor specific KUTAI ATS and Generator controllers using PC, laptop, tablet, or smartphone. Quick connection through a wireless network.

The M8 transmitter is designed for mounting on a DIN rail, and is the ideal solution for creating high-safety wireless link enabling the transmission of commands and status signals. Sensors, RS232 and RS485 ports can be inputs for a M8 ...

The interface cards of series FC2001, FC2002 | Lightbus PCI have been remarkably engineered and are customized keeping in mind the solution for PC-control compatible technology. The efficiency of this equipment has many useful features ...

The LCIC-WIM was designed to fit the most demanding real time weighing and force measurement applications. On the one hand, a very fast load cell interface allows users to capture the data at around 18,000 samples per second. On the other ...

The family of serial boards in standard PC with ISA interface ( PC AT) dedicated to the serial communications covers all common communication standards used in the industry; RS232, RS - 422 and RS485. Serial cards of System Electronics ...

C1200 | Lightbus ISA user interface card To as much as 255 dispersed Lightbus key in and additionally yield segments could be linked to a typical Computer together with the C1200 user interface card. Fiber optics bring information ...

Now you can get the LCIC-WIM board with embedded software to weigh trucks & trains in motion for slow and high speed WIM. The on-board powerful DSP running our advanced algorithm makes all necessary filters and calculates on-the-fly: ...

The dedicated boards, covering both the Bitbus standard that the CAN one, designed for standard PC with ISA interface (PC AT). The main features in addition to the ISA PC AT format are the optical isolation 500VDC and power 5V 100mA. ...

Any application related to weighing or measuring forces is now available in your PC... Stand-alone microcomputer-based interface card requires no other interfacing accessories. Simply connect the cable from each scale directly to the ...

The C1300 | Lightbus VME bus interface card provides up to 255 input and output modules connectable to the VME bus through a single C1300 interface card. Data is carried using fiber optics at 2.5 Mbaud between the industrial peripherals ...

Stand-alone microcomputer-based interface board that was especially designed to fit very fast real-time weighing applications. Requires no other interfacing accessories for the load-cells or the outputs. Typical Applications Multi-head ...

The FC series are BECKHOFF'S PCI Fieldbus Cards typically used in a wide range of computer based applications or operations. Each of these cards is equipped with special features and can be further optimized with the integration of circuitry ...

PMC EtherCAT? Slave Interface Convert your PMC System into an EtherCAT Slave Device - Add EtherCAT Slave (ECS) functionality to your PMC equipped base board - The EtherCAT Slave Controller address space is directly mapped to the ...

XMC EtherCAT? Slave Interface Convert your XMC System into an EtherCAT Slave Device - Add EtherCAT Slave (ECS) functionality to your XMC equipped base board - The EtherCAT Slave Controller address space is directly mapped to the ...

PCI Express? EtherCAT? Slave Interface Convert your PCI Express System into an EtherCAT Slave Device - Add EtherCAT Slave (ECS) functionality to your PC - The EtherCAT Slave Controller address space is directly mapped to the PCI ...

1, 2 or 4 Channel PCI-CAN Interface (Layer 2, CANopen? or J1939) PCI Board with Altera FPGA for up to 4x CAN - 1x, 2x or 4x CAN interfaces according to ISO 11898-2 - Bus mastering and local data management by FPGA - PCI interface ...

CompactPCI? Board with 4x CAN (Layer 2, CANopen?, J1939) Comprehensive CAN Interface Board with Altera? FPGA - 4x CAN interfaces according to ISO 11898-2 - Bus mastering and local data management by FPGA - PCI bus conform to PCI ...

The SGN 3260 is a purpose-built network device with advanced processing and memory capabilities designed to support electric, gas and water utility communications and applications on the distribution grid. The SGN 3260 is an indoor node ...

WinSystems? PPM-N409 series features Small Form Factor Pluggable (SFP) transceivers, controlled by Intel? I210 Ethernet Controllers, bringing the latest in technology to your legacy design. Both module housings are compatible with the ...

PC/104 Data Acquisition module incorporating 16 Analog-to-Digital (ADC) inputs, 8 Digital-to-Analog (DAC) outputs, and 48 bi-directional Digital I/O in a single module. Features 16-bit Analog-to-Digital (ADC) converter with sample-and-hold ...

For the transmission of alarms and faults. The card is mounted in the card cage of the fire control panel (modular). 2x monitored outputs for RT alarm / horns 1x relay output RT alarm 1x monitored output RT fault 1x relay output RT fault 2x ...

Weidm?ller u-remote ? our innovative remote I/O concept with IP 20 which focuses purely on user benefits: tailored planning, faster installation, safer start-up, no more downtime. For considerably improved performance and greater productivity. Reduce ...

The Win Systems PCM-COM4A is a PC/104 serial interface card that has 4 independent 8250-compatible serial channels. It has a 16-byte transmit FIFO as well as 16-byte receive FIFO with error flags. This device has modem control signals ...

The new generation of our I/O modules! Sub modules (@Prints) for signal processing with 1 up to 8 channels and special functions such as serial communication and virtal encoder.

Universal PCI Boards with On-Board Microcontroller Single and dual channel interface boards in PCI format for use in CAN and CANopen networks. Product Highlights: - Flexible Interface for Industrial and Embedded PCs - Rapid Integration ...

Universal PC/104plus Boards with On-Board Microcontroller Single and dual channel interface boards in PC/104plus format for use in CAN and CANopen networks. Product Highlights: - Flexible Interface for Industrial and Embedded PCs - ...

Universal PCI Express Boards with On-Board Microcontroller Single and dual channel interface boards in PCI Express format for use in CAN and CANopen networks. Product Highlights: - Flexible Interface for Industrial and Embedded PCs - ...

Universal PC/104 Boards with On-Board Microcontroller Single and dual channel interface boards in PC/104 format for use in CAN and CANopen networks. Product highlights: - Flexible Interface for Industrial and Embedded PCs - Rapid ...

Low-Cost Passive PC/104 Boards Without Microcontroller Single and dual channel interface boards in PC/104 format for series use in CAN and CANopen networks. Product Highlights - Low Cost Interface for Industrial and Embedded PCs - ...