Fluid-air heat exchangers

Power: 200 W
Maximum temperature: 90 ?C

Set-up, connect, reduce costs gwk Gesellschaft W?rme K?ltetechnik mbH has advanced the continuous development and modernisation of its range of compact water chillers and adapted it to the changing market requirements in close cooperation ...

Flow rate: 400 l/min

The exchangers of this series are particularly used to cool oleohydraulic plants on movable machines; they are equipped with solenoid valves at direct current at 12 or 24 V. The radiative pack is made of aluminium because this material ...

Operating pressure: 10 bar
Temperature: 150 ?C

Dana offers a variety of advanced heat exchanger designs for charge air cooling. All provide improved engine volumetric efficiency for specified engine performance and lower engine displacement. Coolant-cooled charge air cooling provides ...

Power: 400 W
Maximum temperature: 4 ?C - 15 ?C

Maximum temperature: -15 ?C - 55 ?C

Power: 1500 W - 13400 W

Our gwk engineers are passionate about developing technical solutions and this is what we as manufacturers want to prove in the area of cooling towers with our GVK/GHKV series. We see it as our task to understand the entire process of ...

Operating pressure: 1000 Pa

The Meech Needle Cooler provides perfect spot cooling for any small application. Specifically aimed at cooling sewing needles, the Needle Cooler avoids needle breakages and thread burn. The cooler delivers a continuous adjustable stream ...

The Model IVL from ATTSU is engineered with carbon or stainless steel materials that are ideal for industrial use. It is capable of powering up to 15,000 kcal/h within its compact design delivering optimal efficiency with its high heat ...

Operating pressure: 16, 45 bar
Temperature: 260, 150 ?C
Power: 4000, 6000 W

Working Principle Bossmanfilter BAC - Series air cooled after cooler provide economical cooling by utilizing ambient air to cool the hot compressed air from an air compressor.Discharge air from an air compressor is generally 180?F - 350?F, ...

Chiller unit for dielectric unit Cold water chiller unit for constant and stabilized water temperature control to supply the dielectric unit.

Operating pressure: 1 bar - 25 bar
Temperature: -5 ?C - 150 ?C

This range of ammonia chillers have been designed by J & E Hall Internationalfor water or glycol cooling from -5?C to -25?C outlet temperatures. The chillers can be supplied with air or water cooled condensers including evaporative condensers. Ammonia ...

A low cost, Peltier-based thermoelectric, bench-top chilling block which maintains 15 ml test-tube samples or microvials at refrigerator temperature (around 8 ?C) for indefinite periods of time. No ice or freezer pre-conditioning needed. ...

Power: 1750 W - 15000 W

Maximum temperature: 150, -29 ?C
Pressure: 16, 45 bar

Maximum temperature: 5 ?C - 55 ?C
Flow rate: 100 l/h
Pressure: 0 bar - 2 bar

centrifugal high temperature water source heat pump unit refrigerant ? R134a heating capacity ? 2500?5000KW outlet hot water temperature ?45?75? Features: Flow field optimum design of centrifugal compressor with centrifugal impeller ...

Operating pressure: 40 bar
Temperature: 300 ?C
Power: 20000000 W

Power: 30 W - 280 W
Maximum temperature: -10 ?C - 60 ?C

The heat exchanger installed in the continuous recooling unit is easy to open for cleaning when dealing with heavily contaminated media. The air intake for the condenser can be optionally supplied with an air filter. The units come as ...

Power: 130 W
Maximum temperature: 5 ?C - 50 ?C
Flow rate: 0 l/h - 0.36 l/h

Working Principle Bossmanfilter BWC - Series Water cooled after cooler provide economical cooling by utilizing cooling water to cool the hot compressed air from an air compressor.Discharge air from an air compressor is generally 180?F ...

Applications K?hner Re-Coolers are able to cool medias (in the tubes) with the ambient air. Another application is the condensation of steam in the tubes. Such system can be used as part of a heat-pump too. Media Water / water-glycol ...

Operating pressure: 60 bar
Temperature: -100 ?C - 450 ?C

Prevent the heating of hydraulic oil. A constant oil temperature leads to reproducable crimp results.

The RC1 has an insulated stainless steel flexible line approximately 1 metre long with a stainless steel coil supported by an adjustable mounting bracket. This cooler can cool 8 litres of water in an insulated tank from 30C to 5C in approximately ...

Temperature: 590 ?C

With the use of advanced compressors and acoustic insulation of compressor rooms, the chiller products and heat pumps are characterized by highly efficient performance and very low noise emission. For practically all ranges, in addition, ...

SmartBLOCK is a welded plate type heat exchanger that can be opened at both sides and designed without any seal gaskets installed between heat transfer plates, it can provide large heat transfer area within a compact space, and can be ...

AKG pro?ject man?ages and man?u?fac?tures cus?tom-built build?ing ma?chin?ery for a mul?ti?tude of ap?pli?ca?tions and op?er?a?tional con?di?tions, from front-end load?ers via hy?draulic ex?ca?va?tors to tun?nel dri?ving ma?chines. There ...

Power: 4900 W - 442000 W

Top producers of food, beverage and dairy products put their faith in Enerquip, the leading provider of sanitary stainless steel shell and tube heat exchangers, for their critical heating and cooling needs. With over 40 years of experience, ...

Maximum temperature: 0 ?C - 100 ?C
Flow rate: 0.1 l/s - 0.6 l/s
Pressure: 0 bar - 16 bar

These refrigeration systems permit oil and other media to be cooled using air or cold water supplied on site. The BGW series heat exchangers can be opened for cleaning purposes.

AKG de?signs and man?u?fac?tures heat ex?chang?ers for nearly all well-known com?pres?sor man?u?fac?tur?ers. Both for oil and water in?jec?tion and oil free dry-run?ning air-cooled screw and pis?ton com?pres?sors, we can offer sys?tem ...

Power: max 8.0 kW
Pressure: max 300.0 bar

At Enerquip, we know the importance of a good heat exchanger in the chemical industry. For more than 40 years, we have been working with companies to customize the best equipment for their operation. The engineers at Enerquip have extensive ...

AX is the mid-range chiller (cooling capacity from 28,7 to 224 kW), either air or water cooled, manufactured by Eurochiller to cool process water. Efficiency, flexibility and top performances are the main features of this series. Thanks ...

HBE oil-/air coolers have been designed for a fast cooling in return lines of hydraulic systems. They are featuring an especially low-noise operation as well as a high cooling performance. The oil-/air coolers are available in different sizes.

If off-the-shelf just won?t cut it, and your reputation is on the line, you can rely on a proven supplier to provide the quality, performance and on-time delivery needed to keep your shell and tube exchanger project on track. We know ...

The Chiller System is designed for 50? to 125? ambient temperature (10? C to 52? C) and has characteristics similar to that of digital temperature readout. It is hardware supplied by OMAX. and has wet-end components made from a non-ferrous ...

A wide range of standard units can now meet most of the applications in the field of oil/air cooling units. 17 sizes of the OKAN series are available with a heat dissipation of max. 6,2 kW/K, subject to market requirements, in one- or ...

SYIFA one or two-stage indirect-fired absorption chiller. The best summertime air conditioning using an alternative system. Utilizing sustainable energy: steam, hot or overheated water, waste heat or engine/turbine exhaust gas. Cooling ...

For over 40 years, Enerquip has been providing both standard and custom high purity shell and tube heat exchangers to our customers. Our reputation for high quality and fast lead-times have earned the trust of many top companies in the ...

Generating a pressure range of 10 to 82 bar, this specimen cooler otherwise known as a dual tube coil is a tube-in-tube full counter flow heat exchanger that is wound in a helical structure. This specimen cooler manufactured by SENTRY ...

The hydraulic oil cooling system of pressure pumps is a closed loop system which is suitable for warm climates where summer is really hot. This system allows the machine to maintain the right temperature during even the hottest of months. ...

When your reputation is on the line, you can trust Enerquip to provide the quality, performance and on-time delivery that you need to keep your shell and tube exchanger project on track. Enerquip is the only shell and tube exchanger ...

Power: 160 W
Maximum temperature: 10 ?C
Flow rate: 7 l/min

Power: 440 W
Maximum temperature: 0 ?C - 80 ?C

The Innoplas KI/IISC tunnel cooler provides gentle and reliable container and product recooling after hot filling of glass, cans and PET containers with products such as iced tea, isotonic drinks and juices. The range of recoolers ...

Power: 400 W - 2000 W

Power: 46000 W - 258000 W

This configuration offers an integrated solution for cooling fluids in complex machines: combustion engine liquid, hydraulic oil, turbocompressor air. It is also possible to include the hydraulic fan, the expansion tank, the grilles and ...

Power: 1100 W - 10000 W