Automatic dispensers (liquids, resins)

Payload: 20 kg
Reach: 3106, 5585 mm
Repeatability: 0.15 mm

Diesel dispensing station HDM 60 eco with Fuel Management System HDA eco Article no.: 110 700 860 - Fuel Management System with PC software (2,000 users) - Double identification system - driver/vehicle - Identification ...

Using the past success of the revolutionary technology of patented hydrodynamics, SEKO?s new ProMax C builds on the back of the successful ProMax solution for all chemical dilution applications. Designed to ensure full compliance with ...

The unit is used for the distribution of grain and granular products by means of gravity and has no overpressue inside the pipe-system. There is no demand for inside dust-tightness, and feeding can be done from the top through the turn-pipe ...

Loctite 97631 - 300ML Cartridge Dispenser The 300ml Cartridge Pusher has been designed for dispensing Loctite adhesives from 300ml plastic cartridges. The Cartridge Pusher is used in combination with a suitable Loctite controller (97102, ...

The dispenser is equipped with advanced control electronic card with a microprocessor (for all applications) that permits to work in a continuous analogic signal directly from the extruder or cyclically by consensus of injection presses. ...

Payload: 20 kg
Reach: 1717 mm - 3063 mm
Repeatability: 0.06, 0 mm

Pump system HDM 60 eco Box with Fuel Management System HDA eco Article no.: 110 700 960 Description - Fuel Management System with PC software (2,000 users) - Double identification system - driver/vehicle - Identification ...

The device is used to distribute grain and bulk goods using gravity without overpressure. The device feeds from the top through two turn-pipe then to the chosen outlet inside of a closed casing.The pressing on of the rotary pipe seal ...

LOCTITE 97008/97009 Dispensing - Integrated Semi-Automatic Dispensing System The Integrated Semi-Automatic dispenser enables the adhesive to be dispensed directly from larger bottles. It combines both a controller and reservoir into ...

Payload: 15 kg
Reach: 2054 mm - 2806 mm
Repeatability: 0.5, 0.02 mm

The Spiral Distributor DT36-150 was designed for use in the homogenization and/or distribution of flour products via several outlets. It is often used for products with similar values of specific gravity, in applications where physical ...

Built for distributing cereals and granular bulk goods in free fall or pneumatically, our multi-port diverters with 4 - 40 outlets let you choose which direction your goods should go.

The LoctiteTM Digital Syringe Dispenser 883976 is a semi-automatic dispensing system designed to dispense Loctite adhesives and fluids packaged in 3, 5, 10, 30, 55 syringes and 300 ml cartridges. The unit has digital timing control with ...

Dopag's metadis Piston Metering Systems sport solid modular construction designs that allow a wide range of uses. The materials the systems manage are capable of being processed by either shot dispensing capabilities, or constant flow ...

The Unity? Series Dispensers from Nordson are robotic hot melt systems that is capable of accurately dispensing heated materials from 33 cc syringes. It comes in three series: The Unity PURJet? implements adhesives rapidly and with optimum ...

The Lapmaster Programmable Dispenser features microprocessor control of two dispensing channels. These channels, diamond and lubricant, can be independently programmed to deliver precisely timed spray pressures. The timing duration and ...

Loctite 97124- 2 Litre Bag Dispenser The Bag Dispenser 97124 is designed for anaerobic adhesives and sealants in Loctite 2 litre package. It can be used preferably in conjunction with Controller 97152, but also with models 97153 or ...

The MDG volumetric microdosing element is especially suitable for the measuring of small amounts of the product both in powdered and granule form and where a high precision level is required. It basically consists of a stainless steel ...

The Modis Series of Single-Component Dispenser, manufactured by DOPAG Dosiertechnik und Pneumatik AG, is specifically designed as a highly dynamic, speed-proportional metering system. This device is mainly used to control the flow rate ...

Mobile Mixing and Metering system specialized for the Repair Requirements of the Wind Rotor Blade manufacturing industry. The machine concept meters by means of a gear metering pump mounted onto a follower plate. It is possible to ...

The SURFIX is a simple oil dispenser typically applied in wardrobes, shelves or living room furniture. Its intuitive design consists of full bottle clicks that also doubles as a handle. It also includes a StickFix oil sponge that absorbs ...

FEATURES: 1. High precision feeding 2. Wide flow rate range 3. Disassembly without tools, easy for cleaning. 4. MCU system provides fast and accurate control. 5. Built-in A/D conveter 6. AC servo motor control 7. Full colour touch screen controller.

The TPM Batch Powder Mixer is used in dispersing extensive soluble powders. This is done by adding the powder to the mixer through an integrated butterfly valve. The equipment is manufactured with a sturdy and dependable CIP-friendly ...

MBW Micro-Batch Feeders for continuous volumetric feeding of powdery or granular materials consist of a SINT engineering polymer FLEXFLO body with integrated feeder outlet pipe, a feeder screw and a drive unit. Function MBW series ...

This feeder system are engineered with a discharge, a feeder and a weighing functionality. All depending on the operator's needs. These units may further be customized. Moreover, inquiries may be made through contacting ATA Engineering.

Conair feeders are used for volumetrically metering colorants and other additives into virgin materials at the processing machine's throat, which results in a reduction in the total material inventory and colorant used in the device. ...

The G mixer is a pre-mixer for medium-sized machine throughputs, for use on or next to the injection moulding machine Up to four different components can be processed. Combined with KOCH conveyors, a system can operate fully automatically.

The user-friendly and easy-to-clean DCC Loss-In-Weight Screw Feeder from WAMGROUP offers precise metering performance for powder and granular substances that requires continuous feeding and metering. This device, that was engineered to ...

TARNOS volumetric dosing groups are designed for a perfect material manipulation for feeding, mixing, packing and dosing. Groups are composed by five different components: reception hopper, electromagnetic vibrator, feeder, structure ...

The ZUWA Fuel Dispenser (Series: Self Service), generally designed for private / business usage with tank data management system, features a modernized and space-efficient design for rapid yet convenient refueling operations. This dispenser ...

The Additive Dosing System is a very flexible system for the continuous and fully automated dosing of one or several components into a main stream. With this In-line dosing system, soft drinks, beer mix drinks or other liquids can be ...

The liquid distributor is the second most important component of a mass transfer column installation. In order to achieve an even liquid distribution, we take into account among other factors the column diameter the load range the ...

Payload: 3 kg - 6 kg
Reach: 330, 650 mm
Repeatability: 0.01, 0.01 mm

The Wittman Battenfeld DOSIMAX MC Basic is a comprehensive volumetric dosing auxiliary apparatus. It exhibits a digital revolution range, varying from 0-200 rpm, within 0.1-rpm increments. It also sports a digital time range varying from ...

Digital dispensers, the most cheap solution to move the dispensing process to an higher and reliable mode.

The G x pre-mixers are optimised for use on extruders and blow moulding machines. Dosing is batchwise. If the material level falls below a certain point, all the stations accurately dose a set quantity into the mixer. It is irrelevant ...

The 100 Series Weigh Scale Blender from Maguire Products provides a practical and affordable means for molders and extruders with small processing equipment to blend color or additives with extremely high precision. One of the smallest ...

DAV Tech ? is also able to dispense system for 2 components dispensino and mixing This kind of systems allow a very reliable dispensing and mixing of the 2 parts. Basically the fluids come from pressure tanks or pumps and come in PCP ...

MBW Micro-Batch Feeders for continuous volumetric feeding of powdery or granular materials consist of a SINT engineering polymer FLEXFLO body with integrated feeder outlet pipe, a feeder screw and a drive unit. Function MBW series ...

The manual bottle top dispenser Rainin Disp-X is a valuable tool to aliquot reagents quickly, reliably and safely. Th dispenser's built-in safety features protect the user from accidental spills and ensure smooth, trouble-free dispenser ...

The WSB 900 Series Weigh Scale Blenders are designed to meet the requirements of high throughput extrusion lines, large central blending systems and multiple component plastic recycling applications. These blenders can handle up to 12 ...

This machine features an automatic feeding of a brazing strip between the two components, which will be brazed. In addition, this machine is generally used for the brazing application as well as for combining of copper components.

MultiFlo? FX is an automated multi-mode reagent dispenser for 6- to 1536-well microplates offering BioTek?s unique Parallel Dispense? technology. Up to four independent reagents can be dispensed in parallel without potential carryover. ...

The Spool Valve is based on a balanced spool design to create a fast "ON/OFF" fluid dispensing function that is not affected by material input pressure. The spool action displaces a portion of the material back into the nozzle ...

The MultiFlo? FX is an automated multi-mode reagent dispenser for 6- to 1536-well microplates offering BioTek?s unique Parallel Dispense? technology. Up to four independent reagents can be dispensed in parallel without potential carryover. ...

The C 25 electronic gummed tape dispenser is utilized to close boxes with gummed tape. All standard plain and reinforced gummed paper tapes with a width of 20 to 100 mm is processed via this compact machine. This reliable dispenser is ...

MicroFill? offers an economical, compact, and reliable alternative to existing microplate dispensers. Accurate and precise dispensing are guaranteed without the time-consuming recalibration, cassette replacement, and maintenance commonly ...

Label dispenser HS/VS from cab provide are easy-to-handle and cost-friendly. Two designs are offered by cab for accurate dispensing based on position: HS can dispenses labels horizontally in a bottom leading fashion. VS dispenses ...

Capacity:16 ltr Length mm:300 Width mm:330 Height mm:530 Intrastat: 84671110 Weight kg:8 Warranty:24 Months

Handi-Pak is a convenient bubble dispenser designed for ease of use and ideal for low to moderate shipping requirements, retail markets and home applications. Available in 12" or 24" widths and all bubble thicknesses, Handi-Pak ...

All units are equipped with unique dosing cylinder and extreme accurate stepper motor. The dosing cylinder releases the colour in a steady flow. The stepper motor ensures maximum control with no stoppages and no pulsating. There is no ...

Complete with steam quality and quantity monitoring equipment ready mounted Choice for wall mounted / floor standing / expandable / dividing Preheating of steam network to absorb pipes expansion Strong thermal insulation ...

Motor-driven and software controlled, connectable to the dynamic contact angle measuring instruments and tensiometers of the DCAT series. For the precise dosing of liquids into the sample vessel of the DCAT, e.g. for concentration increments, ...

The demand for an excellent mixing quality and consistently accurate dosing is a must when combining additives with the virgin material at the processing machine. Disc dosing is ideal for translucent and opaque parts as well as for dosing ...

This rotary manifold/distributor device comes with two passages and is designed for bottling applications in the beverage industry. Some of the features include smooth flow passages, seal materials approved by the FDA and an electrical ...

for dosing slightly dusty granules from 3 ml to 12 ml APPLICATION AREA: - Pharmaceutical industry - Food industry - Chemicals industry DESCRIPTION OF OPERATION: This dosing unit is suitable for free-flowing granules ...

It is the ideal solution for semi automatic labelling ensuring speed and accuracy with a dispensing width of 250 mm. Junior is available with a wide range of accessories completing its functions, such as print units for variable data ...

This volumetric metering unit is usually located below the machine hopper, connected through an adapter interposed between the feed hopper and the extruder throat. The material dosage quantity or percentage is entered from a digital operator ...

Can be used with various sizes of bottles due to telescopic down tube Liquid is forced into the collecting vessel by squeezing the bulb The flow can be instantly interrupted by pressing the release button Can be used as a siphon by attaching ...