Vertical pumps

In order to ensure generator continuous operation while avoiding production stoppages in the event of fuel pump failure, a second backup pump is provided, installed in parallel with the service pump. In the event of primary pump failure, ...

The hydraulic part is fully manufactured out of thick walled plastic blocks Raw Materials : PP, PVDF, PP-EL, PVDF-EL Cane Length until 2000 mm deep Motor Dismantling can be achieved WITHOUT dismantling the pump Standardized Motors according ...

This unit is furnished with a 10 micron absolute Cartridge Filter and a 2 hp Boost Pump that is mounted on the machine coolant tank. This unit is portable and is enclosed with sound dampening 'Clam Shell' Covers as shown in the picture. ...

With initial hydraulic coverage to 100 GPM and 800 feet TDH, the EBARA Model EVMU is designed for booster, water purification, and hot water applications. State-of-the-art formed stainless steel and several proprietary internal components ...

Flow rate: 0 m?/h - 4000 m?/h
Head: 0 m - 200 m

Flow rate: 1400 m?/h
Pressure: 25 bar
Head: 250 m

Flow rate: 50, 80, 26 l/min

AREA OF USE * Raw water * Hot water * Sea water * Chemicals * Oils and other petroleum products * Pressure boosters (Booster) * Transfer TECHNICAL DESCRIPTION The pump is a single-stage centrifugal pump. SNL can be used for most liquids ...

Where the fire protection water source is located below ground or deck level, the best technical pumping solution is the vertical suspended multi stage turbine pump. With this type of unit the impellers are fully immersed in the water ...

1. The TPOWseries pumps designed for general purposes are made up of double entry, single stage with casings axially split. 2. Mounting arrangements are available in both horizontal and vertical forms. 3. Removal of upper half ...

Head: max 800.0

The L100P Lubricator is a manual grease pump for Series Progressive systems. The lubricator is composed of an aluminum pump body and a heat treated steel piston which is driven by a vertical hand lever.

The Gardner Denver 4X5 centrifugal pump is a small, compact design for super charging the reciprocating, triplex, well service pumps. These centrifugal pumps may also be used in Industrial applications.

Flow rate: 8000 m?/h
Pressure: 0 bar - 103 bar

Power: 0.4 kW

1. Compact structure, small volume, beautiful outlook. The lower barycenter of the vertical structure which co-incides with the center of the pump feet strengthens the stability of running and the duration. 2. Impeller directly mounted ...

Space saving version for installation alongside a vessel For conveying aggressive, corrosive or solid laden liquids from basins for space saving fixing alongside a vessel. Technical properties: Single stage vertical centrifugal ...

Pressure: max 40.0 bar

Flow rate: 10000 m?/h
Pressure: 30 bar
Head: 200 m

Flow rate: 0 us gal/min - 30000 us gal/min
Pressure: 0 bar - 52 bar

The waste water produced in the processing line is fed to the clarifier by an antiabrasive vertical or submersible pump.

Vertical lineshaft pumps available with flanged drive head for electric motors, with horizontal right angle gear, with overgear driven by tractor p.t.o and with vertical pulley.

Flow rate: max 65.0 m?/h
Head: max 40.0 m

Flow rate: 400 l/s
Head: 270 m
Power: 450 kW

Flow rate: 1600, 1400 l/min
Head: 15 m
Power: 9 kW - 12.6 kW

Flow rate: 0 m?/h - 360 m?/h
Pressure: 0 Pa - 750000 Pa
Head: 0 m - 55 m

For the flow through the tempering machine we recommend the AASTED chocolate pumps for chocolate without ingredients. However, chocolate pumps can be quoted for chocolate with ingredients as well. The pump is water-jacketed and provided ...

The vertical multi-stage pumps of Swiss Pump are powered by standard electric motors. The pump unit consists of optimized hydraulics, various types of connections, an outer sleeve, a pump head and various other parts. The in-line construction ...

Flow rate: 21500, 18000 m?/h
Head: 8.5, 6 m

Flow rate: 0 m?/h - 1500 m?/h
Pressure: 0 bar - 25 bar
Head: 0 m - 160 m

Flow rate: 900, 600 l/min
Head: 11 m
Power: 3.3 kW - 5.75 kW

Flow rate: 0 m?/h - 45 m?/h
Head: 0 m - 385 m
Power: 7.5 kW - 37 kW

Flow rate: 0 us gal/min - 35000 us gal/min
Pressure: 0 bar - 35 bar

Flow rate: 45 l/min
Pressure: 6.8 bar

Osip's vertical pump for machine tool coolant is an industrial pump which features a family of variable frequency drives. It is designed to operate and protect industrial pumps by altering the frequency. It also ensures energy and cost-saving ...

Centrifugal vertical multistage water pumps able to develop high pressure and a high water lift with a comparatively low power consumption. Universal pump for civil and industrial purposes, for high pressure system and for irrigation ...

Flow rate: 0 m?/h - 350 m?/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m

Flow rate: 12.5 m?/h - 1500 m?/h
Pressure: 0 Pa - 1600000 Pa
Head: 20 m - 125 m

The OSIP ZS 65 - 75 - 80 - 100 - 120 - 125 - 180 - 200 - 220 is a low pressure industrial electronic pump. This device is used for pumping liquid coolants and lubricating mixtures. The ZS Series is applicable for systems with high flow ...

Power: 0.33 ch

Flow rate: 0 m?/s - 1500 m?/s
Head: 0 m - 40 m

ANSI in line pump is designed in small footprint back pull-out layout that performs a wide range of industrial applications. This assembly is available in eleven size setups that comply to ANSI B73.2. standard requirements. It generates ...

RIDGID's SP-330D is an automatic sump pump used to remove ground water from sump pits. The most common application is for basement drainage to prevent residential flooding. Features Pumps up to 3800 GPH @ 0' Stainless steel housing ...

The vertical monoblock design permits excellent circulation performance with minimal space requirements. The maintenance-free bellow-type mechanical seal is cooled and lubricated by the pumping liquid. This results in long intervals ...

Flow rate: 0 m?/h - 1500 m?/h
Head: 0 m - 20 m

Flow rate: 0 m?/h - 500 m?/h
Pressure: 150, 16 bar
Head: 0 m - 120 m

Flow rate: 600 m?/h
Pressure: 55 bar
Head: 320 m

The ST series, which are manufactured by Metso, are horizontal, general purpose slurry pumps that features a hydraulic design, and gently handles slurry which makes them ideal to use in carbon transfer in gold-leaching processes. The ...

The GS pump is often an interesting alternative for water displacement in areas with large differences in ground levels. This type of pump is available in capacities of 4 to 120 m?/min and delivery heads of up to about 6 metres. The ...

Flow rate: 6000 m?/h
Pressure: 40 bar
Head: 35 m

Flow rate: 0 m?/h - 400 m?/h
Pressure: 0 bar - 48 bar

Flow rate: 0 m?/h - 600 m?/h
Head: 0 m - 30 m

APPLICATION VPX/VPXF? pump are multi-functional products. It can be used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure. VPX? type is applicable to conveying ...

Wet pit, vertically suspended, single casing axial flow pumps with discharge through the column. High efficiency and low NPSH performances

The EVR Slurry Pump operates regularly regardless whether the suction volume is insufficient. it also features a single packaging structure with the points of interest of light weight, little volume, simple establishment. The product ...

Flow rate: 1450 m?/h - 8100 m?/h
Pressure: 0 bar - 16 bar

Flow rate: 23 m?/h

Flow rate: 5 m?/h - 85 m?/h
Head: 8 m - 45 m
Power: 0.25 kW - 11 kW

APPLICATION They can be widely used in oil, chemical industry, medicine, paper making, metallurgy and so on. BRIEF INTRODUCTION AND FEATURES VSX-SS? type is a vertical single-stage submerged centrifugal pump, which is designed and manufactured ...

Flow rate: 20 us gal/min - 250 us gal/min
Pressure: 0 psi - 175 psi