Vertical pumps

Multistage centrifugal pumps with closed impeller for medium and high heads. Closed coupled design with closed impellers, directly mounted on to the motor shaft. Industrial construction with motor shroud and adjustable feet on request, ...

Q = 5 - 250 l/s H = 10 - 160 m p = 25 bar t = 10 - 80 ?C nmax = 3500 rpm

Energy saving, eco-friendly, efficient: The new e-SV design allows easy service and safe maintenance. The mechanical seal can be replaced without removing the motor from the pump! Features and Benefits Top fill plug with air vent ...

Flow rate: 0 m?/h - 16 m?/h
Pressure: 0 bar - 25 bar
Head: 0 m - 75 m

Flow rate: 105 m?/h - 150 m?/h
Head: 16 m - 45 m
Power: 9.2 kW - 18.5 kW

The CME/CM-GE /DCME are circulation pumps that are equipped with in-line ports that are ideally used in various applications such as heating and air conditioning, refrigeration and domestic hot water systems. These all-around pumps make ...

Q = 0,3 - 3 l/s H = 3 - 90 m p = 16 bar t = 10 - 80 ?C nmax = 1750 rpm Vertical hydrophor single-stage and multi-stage self-priming pump.

Flow rate: 0 m?/h - 1500 m?/h

Flow rate: 0 m?/h - 200 m?/h
Pressure: 0 bar - 45 bar
Head: 0 m - 300 m

Flow rate: 0 l/min - 80 l/min
Pressure: 7 bar
Head: 0 m - 9 m

Flow rate: 0 m?/h - 1500 m?/h

A variety of EBARA's devices and technologies are used in power plants. Many of EBARA's products and technologies are employed in a number of power plants all over the world, for example, high-pressure boiler feed pumps, large-capacity ...

Flow rate: 3, 15, 4, 30 m?/h
Head: 22, 16, 20, 6 m
Power: 1.1, 550, 1.5, 0.25 kW

The Online Vertical Pump MU-L Series is manufactured by Pompe Garbarino SpA. The product is commonly utilized for chemical, fresh and sea water, condensate, oils chemical and petrochemical products. The pump is a centrifugal type that ...

The new SB-ds-eccentric screw pump Powerful, lightweight, quiet These proven features we have optimized for viscous liquids (max. 3000m Pas) Look to the benefit very big capacity (max. 70 l/min) lightweight and fit for use ...

Flow rate: max 100.0 m?/h

Flow rate: 0 l/min - 50 l/min

The vertical double suction centrifugal pump has a spacer coupling design. The casing has in-line flanges, double inlet impellers that are efficient, a low NPSH, balanced axial thrust and a flow rate of 3.500 m3/h. It is used for fresh, ...

Application These pumps are suitable for various purposes such as water supply system in industrial plants agriculture and sprinkler irrigation systems, Air conditioning plants, pumping fuel, edible oils and condensates. Design General KSM ...

Flow rate: 0 m?/h - 2500 m?/h
Head: 0 m - 320 m

Flow rate: 0 m?/h - 300 m?/h
Head: 0 m - 28 m

Flow rate: 0 l/min - 700 l/min

The vertical shaft pumps have many advantages when it comes to constructing pumping stations. They are suitable for transferring most liquids including water and liquids that have small solid particles in suspension. This is especially ...

General DICKOW-pumps of the series KM are sealless centrifugal pumps. The static containment shell forms a closed system with hermetically sealed liquid end. Applications Magnetic driven KM-pumps are designed to improve plant and personnel ...

Flow rate: 0 m?/h - 1350 m?/h
Head: 0 m - 275 m

Flow rate: 324 m?/h - 3600 m?/h
Head: 26 m - 70 m
Power: 0 kW - 1200 kW

Erect shaft pumps have various benefits in the manufacturing of pumping stations, they are ideal for conveying of most liquids, including clear water and liquids with few suspended solids, specific for industrial operations. This type ...

General The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries. Since the pumps are installed inline, only a minimum of space is required and therefore, these pumps ...

Flow rate: 0 m?/h - 12.5 m?/h
Head: 0 m - 315 m

Flow rate: 5 m?/h - 891 m?/h
Head: 4 m - 37 m

Flow rate: 0 m?/h - 12 m?/h
Head: 0 m - 22 m
Power: 0.55 kW - 0.75 kW

This tool engineered by Detech pumps, is a vertical line shafe turbine pump, suitable for deep well and want tank applications. It is commonly utilized either in fire fighting activities or various water supply purposes.

Turbo Flow WSL Series dry pit vertical sewage pumps utilize the latest technology for a wide range of storm water, sewage, industrial wastes and dry dock applications.

Vertical turbine pumps are firstly invented by Mr. M. Layne and adapted for use in cased wells or where the water surface is below the practical limits, where other pumps can not do the same job. Vertical Turbine pump efficiencies are ...

Ideal for new installations or to replace Triplex, Quintplex, or Centrifugal pumps 100 to 600 gpm Pressure to 5000 psi Tap Water, 95/5, and Water Glycol Fluid Variable Delivery Pressure Compensated Other Controls: Volume, Load Sense, H.P. Limiting

Flow rate: 0 m?/h - 80 m?/h
Pressure: 0 bar - 16 bar
Head: 0 m - 158 m

Flow rate: 17 m?/h - 43.2 m?/h
Head: 4 m - 28.5 m
Power: 0 kW - 15 kW

From the Vertical Turbine family and by using some technical modifications on some of standard VTP pump parts; Layne Bowler has introduced GeoLayn Brand, Geothermal Pumps. Other Features: ? Low temperature is less than 70? C ? High ...

Flow rate: 1080 m?/h
Head: 16 m
Power: 11 kW - 30 kW

The Verderhus screw channel pump is tremendously efficient even for BEP without any loss of power. The traditionally designed impeller is available with the screw to guarantee greater efficiency while pumping denser fluids. A wide vent ...

Flow rate: 0 us gal/min - 2500 us gal/min
Head: 0'00" ft - 400'00"

Flow rate: 360 m?/h - 1152 m?/h
Head: 7 m - 33 m
Power: 0 kW - 200 kW

Flow rate: 7 m?/h - 50 m?/h
Head: 11 m - 40 m
Power: 0.37 kW - 7.5 kW

Stainless Steel, cast Iron or cast iron/bronze-fitted construction in standard configurations. Close coupled, frame mounted, ANSI options available. Individual pump flows up to 5,000 GPM and 400 feet TDH. End suction pumps are designed ...

The developed series MKP-Bio offers you an excellent solution for the aseptic application in the pharmaceutical, biotec and food industrie. The pump has been developed and designed according to the EHEDG recommendations and takes in ...

Reliable continuous operation when slurry is available No shaft deflection during loss of prime due to run back of slurry down discharge pipe No impeller adjustments required No water flush No shutdown due to clogging ...

Flow rate: 324 m?/h
Head: 53 m
Power: 4 kW - 22 kW

When we can't avoid transfer pumps with low entry coolant systems, we try to minimize the problems associated with their installation and operation. The objective of good sump/transfer system design should be to have reliable pump operation ...

Flow rate: 0 us gal/min - 150000 us gal/min
Head: 0'00" ft - 435'00"

This is a sealless, "IN-LINE" leak-free peripheral magnetic drive centrifugal pump design. The pump is constructed with all wetted parts manufactured from solid bar stock. The use of bar stock offers the advantages of high purity and ...

Flow rate: 480 us gal/min - 2250 us gal/min

Flow rate: 18 m?/h - 80 m?/h
Head: 13 m - 41 m
Power: 0.25 kW - 15 kW

The A-C vertical turbine pump is specifically engineered to execute operations that require heavy-duty tasks. It supplies water to stand pipes, sprinklers, chemical mitigation and hydrant assemblies. All of these are necessary for fire ...

These pumps have been designed for pumping clear and wastewater from house, garden or yard, and is supplied with built-in level control and check valve. The pump and motor section form a pressure-tight encapsulated unit, fully flood-proof, ...

Flow rate: 15 us gal/min - 50 us gal/min
Head: 4'00" ft - 20'00"

Flow rate: 2 m?/h - 160 m?/h

The Operating Parameters of Neptuno Pumps have up to 40,000 gpm (7,500 m3/h) capacity, 1,200 Feet (400 m) Heads, 2000 hp (1500 kW) Power, 590 psi (4,067 kPa) Pressures, 50/60 Haz Frequency, 400?F (200?C) Temperature and 8" to 40" ...