Valve controllers

The Controlled Safety Relief Valves are ideally suitable for sliding pressure plant operations with low opening and closing pressure differences. These have high tightness feature up to a set pressure due to high closing forces. This ...

Converts analog input control signals to coil current of a proportional solenoid valve by means of pulse width modulatiion Switch-off function at less then 2% of the maximum control signal Adjustable ramp control Output coil current ...

The Control is PID controller that makes any solenoid valve "intelligent". The Control can control 2 loops in the same manufacturing process, open, closed or double. For instance: - In an open loop: the Control adjusts the valve's pressure ...

The PPU-P 10 Unit Pick&Place is integrated in the plug & work all standard sequence programs. This is in addition to rotary and connected gripping modules. When the two cables and the hose are connected, the unit is complete and ready ...

The GEM? 4242 combi switchbox is suitable for mounting to pneumatically operated linear actuators. It utilises a microprocessor controlled, intelligent position sensor and an analogue travel sensor system. The combi switchbox was specially ...

Tension Reducer or Power Reduction Board is specifically designed for the 758 Series, 8 control models. This innovation minimizes the power consumption of the solenoid valve and maximizes its temperature use even in demanding situations ...

The Valvetop DXP features a rugged, epoxy coated aluminum enclosure that is tropicalized inside and out to withstand harsh environments. Because of its durability and reliability the DXP is able to meet many worldwide certifications including ...

AMTRONIC offers On And Off management regarding pneumatically-driven quarter-turn actuators in addition to open Or closed placement recognition. It is actually installed entirely on ACTAIR or even DYNACTAIR actuators with no bracket, ...

The ACT20X-SDI-HDO/2SDI-2HDO valve control modules are controlled from the safe zone on the input side by the switching signals (NPN, PNP) and provide digital outputs to switch actuators (solenoids, alarms) in Ex zone 0. Depending ...

This 2X Rexroth unit is for the DRE, DBE, DBETX and 4WRBA valves.

This remarkable SVC100 Spray Valve Controller is designed by FISNAR that is suitable for all SV series spray valves. It is ideally used for providing the adjustment controls that is necessary for a clean spray application. It has the ...

Overview Microprocessor controller for three-step motorized valves, 48x96 / 96x96 (1/8DIN - 1/4DIN) size. Manufactured using SM Technology, the instrument provides a complete operator interface, protected by a Lexan membrane that ensures ...