Bus converters, Gateways

Create point to multi point networks that distribute I/O over large areas. Input and output types include discrete (dry contact, PNP/NPN), analog (0 to 10 V dc, 0 to 20 mA), temperature (thermocouple and RTD), and pulse counter. - ...

The actuator-sensor interface (AS-Interface) replaces conventional wiring technology on the sensor-actuator level. AS-Interface has firmly established itself as a worldwide standard for the cost-effective transfer of power and signals ...

For operation of an inherently safe fibre optic cable "op is" according to IEC 60079-28 For 100 MBit/s Industrial Ethernet Transmission range up to 5 km (multi mode) or up to 30 km (single mode) Extended temperature ...

Compact WirelessHART gateway for operating WirelessHART field devices Ethernet interface for communication with DCS and Asset Management System Intuitive operation via web server Robust stainless steel enclosure with IP65 rated protection

Gateway Modbus-RTU, PROFIBUS DP or DeviceNet to Modbus-RTU and Manager - Compact dimensions: 22.5 mm width, 99 mm length - Protocol gateway (conversion/repeater /adapter) to Modbus-RTU RS485 protocol for Ascon Tecnologic products ...

DIN rail mount gateway from CANopen or Modbus TCP to Modbus RTU - Protocol gateway (Conversion/adapter) to Modbus-RTU RS485 protocol for Ascon Tecnologic products and third party devices - Connectible to Modbus-TCP(over Ethernet) ...

TI Cortex A8 800MHz CPU DDR3L512MB RAM 1GB Micro-SD card for system storage 1 x Micro-SD Slot 6 x RS-232/485 isolated serial ports 2 x 10/100 Base-T Ethernet ports 1 x Mini-PCIe for WIFI/3G/GPRS/4G Support web service for remotely ...

The AS-i Master is the ?head? of the AS interface system. It organises communication on the bus and makes available all data to the higher-level system via the gateway. The master shown here is equipped with a Profibus gateway. Gateways ...

The extraordinary QuantumX CX27 is a real-time data acquisition via EtherCAT is ideal for any high level demands on real-time data transmission in any and all automation routines specially whenever cycle times of less than one millisecond ...

Load cells from HBM Test and Measurement ensure optimal results in industrial applications, for example in batching and filling machines. Users throughout the world appreciate the ruggedness, precision and quality of weighing technology ...

The new Scalance XC100-40BR optical bypass relay is another sophisticated and highly efficient device from the Siemens automation division. This device is designed using the latest technology to make it very efficient and perform as expected ...

Siemens introduces the RUGGEDCOM media converter for error-free communication at high levels of electromagnetic interference, extreme temperatures and long distances. It is a utility-grade, fiber optical media converter that has the power ...

From the leaders in innovating the Ruggedcom media converters by Siemens is a top of the line creation. It is designed to cater a wide variety of applications and concepts. It features a utility-grade, protocol-independent, serial-to-fiber ...

The RUGGEDCOM RMC40 is a 4-port unmanaged Ethernet switch that provides both copper-to-fiber media conversion as well as 10Mbps to 100Mbps speed conversion. The RMC40 can be used in place of traditional copper-to-fiber media converters ...

The Ruggedcom RMC41 is a 2-port Ethernet switch that works for copper-to-fiber media conversion functions and can work for 10 to 100 Mbps conversion functions. This is made to work in tough environments and can be useful for many Ethernet ...

These new additions to the AS-i gateway family have many great features, such as a color display, certified Ethernet ? IP interface, integrated web server, connectivity ports, etc. The technology allows for these gateways to recognize ...

Color display provides clarity in set-up and diagnosis. This unit is certified by Profinet according to Class B conformance. The IFM gateway provides quick connection from the AS-i to Profinet while the web interface and color display ...

The IFM AS-i gateways for multiple fieldbuses is a product of great ingenuity and brilliance. It offers Supports all slaves of the AS-i specification 1.0 to 3.0, Extended diagnosis in the display and via the fieldbuses, Flexible handling ...

Input Encoders with EnDat interface, ordering designation EnDat211) Connection* M12 flange socket (female) 8-pin M23 flange socket (female) 17-pin Cable length ? 40 m (with HEIDENHAIN cable), greater lengths upon request Power ...

ABB France launches a new product within the range of serial data converters. This new product offers smart gateway between Ethernet and Serial protocols. You can benefit as well of additional features to speed up your Modbus Communication ...

9 products available in this conversion Choose between converters: RS232 to RS422/RS485 RS232 to Current Loop RS422/RS485 to Current Loop RS232 - RS232 RS422/RS485 - RS422/RS485 Choose between: ...

8 products available in this conversion Choose between RS232 or RS485 Choose between Glass or Plastic Fiber Choose 24-42VAC/DC or 110-240VAC/DC power supply Triple galvanic isolation Up to 40 m for Plastic. Up to 4 km for Silice Multimode ...

The world?s leader in providing connectors and other industrial equipments , LEMO features their line of Media converters. The MEERKAT utilizes Triaxial 50 or 75 ? to send camera?s triaxial signal . Primarily used for digital encoding ...

The LEMO SERBAL four-channel multilplexer can work with four BNC connectors and two fiber optic contacts, two signal contacts and two power contacts on the ground. This can move from a coaxial BNC input setup to a 3K.93C cable assembly. ...

Shack now offers a conversion unit from single SMPTE to a single-mode optical fibers and this is called the Lemo Shack. What?s great about this is it eliminates the SMPTE and can be used in a pre-fibred venues. This technology is also ...

LMEO Ethernet, the best single mode to fibre media converter, has a push and pull self-latching feature applicable even in environments with abrasive conditions and offers dependable conversion. It?s safe and manageable with an IP68 protection ...

The MULTISHACK-6X is a conversion system from multiple SMPTE connectors/cable to a single multiway fibre cable. The system provides a transition from HD over hybrid (copper and fibre) cables to HD over a single multiway fibre optic cable. Description: ...

ROHM offers D/A converters in I2C (2-wire serial), SPI (CSB), and 3-wire serial I/F. Ideal for use as a D/A converter for electronic adjustment in a variety of applications.

SmartWire-DT Gateways are smart devices used for exchanging data between SmartWire-DT devices using high-level controls. Data of SmartWire-DT devices like motor starters or control circuit devices is transferred with the help of the fieldbus ...

CONTEC's solution to the growing need in industrial automation, the GP-IB (CB)FL Low price High - speed type GPIB communication card for CardBus. Designed forward large-capacity data between a PC and boards without hanging load to CPU ...

COM-1(USB)H is RS-232C 1ch Micro Converter used for USB2.0. It enables conversion of the PC's USB into RS-232C serial communications. COM-1(USB)H features one channel RS-232C communication port and possess the capacity to support up to ...

Isolated RS-232C 1ch Micro Converter for USB2.0 COM-P1(USB)H his method is a USB 2. micro ripper tools for carrying out RS-232C serial communications with exterior products. Each ripper tools has one funnel RS-232C serial port. ...

The YFGW710 Field Wireless Integrated Gateway from YOKOGAWA complies to the wireless communications standard ISA100.11a for industrial automation of International Society of Automation (ISA) , and transmits ISA100 Device data to the system ...

The plug-in type, RS232C/RS485 dual directional converter is what we called the ML2 RS232C/RS485 Converter. With its two ports of RS232C and RS485, this device allows to execute isolation of communication signal, level conversion and ...

Presenting a state of the art product. The VJET Ethernet/RS-485 Converter by YOKOGAWA. A mastered component that features a compact,plug-in type communication converter that uses the Modbus/TCP protocol for connecting to host devices ...

The Model 8711-GF Quad Port Gigabit Ethernet fiber PMC Adapter has been developed for use with 10/100/1000 Ethernet ports. It offers dual Intel 82546 MAC/PHYs on a single PMC slot, PCI 2.2, 33 mHz and 32 bit bus interface. It is also ...

PFS or PFD with PROFIBUS DP interworks up to nine auto-burner controls units in the 19" standard rack. The ready-wired module subrack BGT is integrated with the PFA 700. Combined with the module subrack BGT, the PFA 700 field bus interface ...

Hartling has added to their excellent line, the har-speed M12/RJ45 adapter used for Gigabit Ethernet. The unit features a compact design suitable for the transferring signals and Ethernet in industrial environments that are demanding. ...

The Fiber bundle cross-section converter is for converting a circular light beam into a slot-shaped light beam. It consists of a bundle of fibers where the configuration in each end fitting varies (mapped bundles). Curves or patterns ...