Gear pumps

Flow rate: 1 l/h - 500 l/h
Pressure: 0 bar - 20 bar

Flow rate: 120 l/h - 9000 l/h
Pressure: 0 bar - 15 bar

Volumetric electric gear pumps, produced in Italy, suitable for pumping oily, dense and viscous liquids free from solid bodies.

Flow rate: 120 l/h - 4200 l/h
Pressure: 0 bar - 15 bar

Gear pump for melt for extrusion. This type of pump is used for the extrusion tasks. The pump will be installed behind the extruder to build up the required process pressure. Operating Parameters Viscosity up to 40000 Pas Temperature up ...

The ?R? Pumps are used for liquids of any viscosity as solvents, chocolate or bitumen. The liquid may be lubricating or non-lubricating and may contain abrasive particles as color pigments. ?R? pumps can be used best in one or more of ...

Flow rate: 1.28 l/h - 12000 l/h
Pressure: 15 bar

Flow rate: 0 us gal/min - 4 us gal/min
Pressure: 0 bar - 4 bar

The CHEM MINI series is the perfect pump for dosing tasks to small quantities. The smallest of these pump delivers 0.2 cm3 / rev. The pump works very precise and can be designed for use with critical media with a magnetic coupling. Operating ...

Flow rate: 0.3, 0.4 l/min
Pressure: 6.9 bar

Flow rate: 20 l/h - 170000 l/h
Pressure: 0 bar - 120 bar

Pressure: 0 bar - 700 bar

Hydac's PGI 102, available in three sizes, viz, 2,3 and 6, provides a large rotation range from 3.8 cm?/rotation to 250 cm?/rotation. The normal working pressure of 330 bar can be extended up to 350 bar. It boasts of a maximum speed ...

VISCOMAT 200/350 is a gear pump that has an internal material for maintaining consistent flow at high pressure. It is equipped with bypass and venting valve. The manometric witch helps the pump automatically put into operation. The pump ...

Flow rate: 0 l/min - 2.1 l/min
Pressure: 0 psi - 30 psi

consistent flow volume max. working pressure 30 bar max. flow rate 70 litres/min suction power up to 10 000 mPAS media temperature from -40?C up to 160?C range of viscosity 2 - 10.000 mm?/sec. max. dry-run time up to about 30 seconds Versatile ...

This fire system consists of the NBF or NKF suction pump, which is integrated with a driver and coupling and may include a diesel engine or electric motor set up on a base frame. The NBF end-suction pump is designed for fire sprinkler ...

he SQFlex family of water pumps provide an environmentally-friendly water supply solution. The pumps come equipped with a magnet motor that harnesses energy generated by nature. The SQFlex incorporates solar panels and wind turbines ...

The Lubrication Gear Pump is manufactured by SAMOA Industrial, S.A. The product is made of cast iron and the gears are made of sintered steel and it comes with a by-pass valve.The product is commonly utilized for lubricants and the single-phase ...

The Roloid gear pump by Radicon is a robust, versatile and compact device, being easy to install, extremely reliable and requiring little maintenance in service. The specifications of the gear pump are impressive, while the pump design ...

Flow rate: 0 l/min - 3 l/min
Pressure: 0 bar - 3 bar
Power: 12 W - 40 W

Flow rate: 0.03 l/min - 0.6 l/min
Pressure: 0 bar - 15 bar

Flow rate: 1.5 m?/h - 1600 m?/h
Head: 2 m - 125 m

General Description_ The CBM1 gear pump consists of a gear pair, a housing, a front cover and a rear cover.The CBM1 Series Gear Pump features high mechanical and volumetric efficiency, low noise level as well as low weight/power ratio.

The CB-E Series assembled by Deli, is an external gear pump, best suited in small hydraulic systems of middle to high pressure applications. This device is small in displacement, and features a gear pair consisting of two aluminum bearing ...

The CB-G Series features gear pumps designed to provide high mechanical and volumetric performance, integrated with IDC power units ideal for many applications. These are built with gear pair, housing, front/rear cover, and two shafts. ...

Efficiently equipped with two valves (relief valve & check valve), CBR pump shows minor displacement, good pressure, the axial clearance of which is compensated quite automatically by floating side plates. A very easy way to get a "gravity ...

The CB2A gear pump is equipped with two aluminum bearing blocks that automatically compensate axial clearance. It is protected by a simple front and rear cover housing. The CB2A's bidirectional feature makes it ideal for the closed hydraulic ...

Pressure: 0 bar - 120 bar

Pressure: 0 bar - 120 bar

Pressure: 0 bar - 120 bar

The PMPO rotary piston lobe type, high capacity pumps can deliver serious flow rates,thanks to the higher displacement and high rotation speeds up to 7,000 RPM. The inlets and outlets are on the base, and the input shaft can be located ...

Pressure: 275 bar

Pressure: 500 bar
Power: 90 W

Pressure: 0 bar - 500 bar
Power: 90 W