grease pump / internal-gear / rotary lobe / high-capacity

The PMPO rotary piston lobe type, high capacity pumps can deliver serious flow rates,thanks to the higher displacement and high rotation speeds up to 7,000 RPM. The inlets and outlets are on the base, and the input shaft can be located on the same or opposite side. The inlet and outlet diameters can be either ? = 10 or ?= 14 mm, depending on the model. Also, the inlet and outlet center distance is either 24 or 25 mm. Pump is fastened with screws to the distributor or the engine, tightly, reliably. The pumps have an external diameter of 59 mm, with height depending on the flow rate, ranging from 19 to 37 mm, with shaft of 7 mm with 2.5 mm drive.