Drill chucks

Diameter: 55 mm - 150 mm
Length: 13.8 mm - 21.2 mm

The Bates Technologies line of ProMatic? Production Hones are created for use in Rottler, Sunnen, CK, CU and SV machines to bring original equipment manufacturing to the remanufacturing industry. Designed specifically for larger bores, ...

Diameter: 5.5 mm - 79.7 mm

Diameter: 56 mm - 75 mm

Quickbits Universal fast release system. The P&N Quickbit range has been specifically developed to provide quick change-over of standard 1/4 inch hex shank power bits. This comprehensive range of power drill bits and accessories is for ...

Hardinge HQC Quick-Change collets can be changed from one size collet to another size in less than 20 seconds. More Uptime on Multi-Spindle Automatics The HQC System requires less draw bar force to adequately grip the bar, greatly ...

Hardinge force-limiting step chuck takes the headache out of thin-wall turning. Maintain inside and outside concentricity of thin-wall parts in a fail-safe process while eliminating the nuisance of manually tweaking the draw bar force. A ...

Diameter: 650 mm - 1000 mm

Diameter: 160 mm - 250 mm
Rotational speed: 0 rpm - 4000 rpm
Length: 91 mm - 122 mm

Diameter: 102 mm - 830 mm

Diameter: 20 mm

Automatic self-centering BIG THRU-BORE CHUCK with special patent device for hydraulic feed for oil country lathes,for UNPREPARED EXISTING MACHINES

Diameter: 224 mm - 800 mm

Diameter: 6 mm - 32 mm
Rotational speed: 0 rpm - 15000 rpm

Diameter: 250 mm - 500 mm

Diameter: 19 mm - 48 mm
Length: 75 mm - 139 mm

Diameter: 200 cm - 375 cm
Gripping force: 14200 N - 34350 N

Since tapping operations are critical the security and quality is important. To achieve a top result, not only the tapping tool is important, but also the tool holder. The new versatile CoroChuck? 970 is designed for a stable and precise ...

Diameter: 70 mm - 140 mm

Diameter: 16 mm - 42 mm

Diameter: 7 mm - 80 mm

Diameter: 16 mm - 32 mm
Length: 105 mm - 165 mm

Diameter: 90 cm - 200 cm
Gripping force: 8500 N - 40000 N

Diameter: 52 mm - 66 mm

Based on proven clamping systems SP and SZ, EMUGE has developed the new clamping system ST. It aims on clamping at workpiece bore holes, which are slightly unprecise. The new clamping system allows a safe and stable alignment of workpieces ...

Diameter: 210 mm
Gripping force: 20 kN
Length: 175 mm

Diameter: 160 mm - 610 mm
Rotational speed: 1800 rpm - 6000 rpm
Gripping force: 47 kN - 345 kN

Diameter: 315 mm
Gripping force: 30 kN
Length: 310 mm

Diameter: 125 mm
Gripping force: 10 kN
Length: 400 mm

Diameter: 86 mm
Gripping force: 6 kN
Length: 283 mm

Shell end milling arbor Details - for cutters with cross or longitudinal slot - including parallel key, driver ring, cutter tightening screw, special wrench - thread: M12

Diameter: 6 mm

Diameter: 42 mm
Length: 70 mm

Diameter: 0 mm - 107 mm
Length: 0 mm - 282 mm

Drill Tapper is a quick change system for drilling and tapping offering two operations with one head. Excellent durability is achieved by utilizing the largest possible contact area, the finest quality material with hardness of HRC 63, ...

Mega D Chuck achieves simultaneous fit on the nut as well as the taper shank to obtain rigidity close to an integral body. In the case of a conventional milling chuck, the inner taper of the nut contacts only with the body when tightened. ...

Heavy-Duty Anti-Pullout Milling Chuck The Mega Perfect Grip is a highly accurate milling tool holder with fully concentric clamping with runout less than .0004" @ 4xD. It accepts industry standard Weldon flat milling cutters (ASME ...

Diameter: 16 mm - 42 mm
Length: 2.56 in - 11.81 in

Diameter: 90 mm - 196 mm

Diameter: 27 mm - 102 mm
Rotational speed: 5000 rpm - 10000 rpm
Gripping force: 30 kN - 172 kN

1CC, 5C Collet Fixture for Chucks 5C collet chuck for short runs,quick set up! Chuck the OD in your power or manual chuck for quick set up on 5C collets. Dont remove your power or manual chuck just use the?C . 1/2 turn lock ...

Diameter: 27 mm - 102 mm
Rotational speed: 5000 rpm - 10000 rpm
Gripping force: 35 kN - 172 kN

Diameter: 5 mm - 12 mm

Diameter: 53 mm - 101 mm
Rotational speed: 5000 rpm - 7000 rpm
Gripping force: 108 kN - 172 kN

Diameter: 8 mm - 20 mm

Diameter: 53 mm - 101 mm
Rotational speed: 5000 rpm - 6000 rpm
Gripping force: 108 kN - 172 kN

Diameter: 10 mm - 30 mm

Diameter: 53 mm - 104.5 mm
Rotational speed: 5000 rpm - 7000 rpm
Gripping force: 108 kN - 172 kN

Gripping force: 12000 N - 200000 N

Diameter: 20 mm - 42 mm
Length: 123.4 mm - 266.8 mm

Gripping force: 570 N - 21150 N

Diameter: 16 mm

Diameter: 20 mm - 70 mm
Gripping force: 16.2 kN - 26.9 kN
Length: 150 mm - 235 mm

Gripping force: 13500 N - 206000 N

Diameter: 5 mm - 160 mm

Diameter: 57, 50 mm
Length: 95, 102, 108 mm

Diameter: 57, 50 mm
Length: 110, 105, 100, 88 mm

Diameter: 28, 50, 18.05 mm
Length: 60, 50, 47, 70 mm

Diameter: 24 mm - 52 mm
Length: 47.5 mm - 95 mm

Diameter: 22.9, 30, 23 mm
Length: 59 mm - 66 mm