Differential pressure flow meters

The V-Cone Flow Meter is an advanced differential pressure instrument, which is ideal for use with liquid, steam or gas media in rugged conditions where accuracy, low maintenance and cost are important. With its DP built-in flow conditioning ...

The V2 System Flow Meter has an advanced differential pressure flow sensing design. The unit features built-in flow conditioning for superior accuracy. The V2 System is the ideal new or retrofit flow meter for multiple clean water and ...

The model 6700 is a handheld micromanometer with Bluetooth? wireless capability; it takes airflow and pressure readings with a pitot tube or the optional velocity grid. The grid is a cross shaped grid, similar to the one in the base of ...

The DSV by Eastern Instruments is a Multi-point Pitot air and gas flow meter which retains all features in the VAP3 pitot. The DSV for round ducts makes installation of the integral air flow measurement pitots extremely easy. The pitots ...

Process pressure: 2 bar - 25 bar
Process temperature: -40 ?C - 80 ?C
Volumetric flow rate: 2 l/h - 100 l/h

The DSV or Duct Section VAP from Eastern Instruments simplifies the installation of air flow measurement pitots by mounting them within a flanged duct section for easy, bolt-in installation into any square or rectangular duct work. Please ...

Process pressure: 2 bar - 25 bar
Process temperature: -40 ?C - 80 ?C
Volumetric flow rate: 5 l/h - 250 l/h

Flow rate: 276 l/h - 16100 l/h
Pressure: 17000 Pa - 400000 Pa

The High Beta? Process (HBP) Flow Conditioner represents a proprietary-designed flow conditioning unit mainly intended for the removal of cyclonic, turbulent and reverse flow, with minimum pressure loss. These units can be used in a variety ...

The IHP is Eastern Instruments' newest product!! Our Integral Heated Pitot utilizes the original VAP3? Pitot technology by providing an accurate differential pressure output, that allows for precise air flow measurement and control of ...

Process pressure: 0 bar - 315 bar
Process temperature: -60 ?C - 575 ?C

The AMD series combines the function of an accurate airflow measuring station and a low leakage control damper into one compact assembly that both measures and regulates airflow volumes to a target set-point. The AMD series is compatible ...

Process pressure: 5.17 bar
Process temperature: 88 ?C
Volumetric flow rate: 8 l/min - 7200 l/min

The FLC-FN series from WIKA is a set of flow and venturi nozzles that are specially made to measure liquid, steam and gas flow. This nozzle has an accuracy rate of ? ?0.1 % with a 0.1% measurement repeatability ratio. It guarantees minimal ...

The FLC series, which is manufactured by Wika, is a venturi tube that is ideal for use in measuring the flow of fluids, gas, and steam in applications such as oil production and refining, and in the chemical and petrochemical industry. ...

Process pressure: 16000000, 25000000 Pa
Process temperature: -60 ?C - 60 ?C

Pressure: 16 bar - 40 bar
Nominal diameter: 15 mm - 250 mm

Flow rate: 20 l/min
Pressure: 25 bar
Nominal diameter: 1 in

Process pressure: 84000 Pa - 106700 Pa
Process temperature: -60 ?C - 60 ?C

Process pressure: 0 bar - 50 bar
Process temperature: -40 ?C - 100 ?C

Flow velocity: 0.3 m/s - 120 m/s

Spirax Sarco has designed a closed loop control for general-purpose monitoring applications. The orifice plates deliver the highest performing flow-meters which arrive assembled, calibrated, and pressure tested. The plates are a competitive ...

These airflow measuring blades are for use with air conditioning systems, vacuum cleaning systems, laboratory air supply systems, air flow test rigs, fume extraction and exhaust systems. These DEBIMO measuring blades from KIMO are a cost-effective, ...

The orifice flowmeter F O N4 is suitable for the measurement of flow rates for clear liquids within closed pipes. The installation along with the flow direction of the sensor can be selected freely. During use, the optional limit contacts ...

Throttle device is the most historic and most extensively used flow measurement instrument. It features itself simple structure, easy installation, stable performance and high accuracy, etc merits. It can be used for flow measurement ...

Two versions are supplied by Orimaster, one for volumetric flow and one for mass flow. It has an integrated DP flow measurement system that combines primary element with DP transmitter in a single flow meter assembly. The one piece flow ...

The main part of the bypass meter is a measuring cone with a float. The water flows vertically upwards through the cone which is equipped with a bypass orifice at the top. A filter at the inlet prevents the ingression of particles. Inlet ...

Pressure: 50 Pa - 6000 Pa

DFM4 series Flow Meters SINGLEs DFM4 flow meter provides reliable monitoring and alarm functions for optimizing temperature control processes in plastics processing, chemical and die-casting applications. For applications that use water ...

? Designed according to DIN EN ISO 5167-4 ? undisturbed straight pipeline ? Designed for liquids, gases or light fibres ? very low deposition danger - suitable for transporting light fibres ? 2 x8 pressure taps guarantee highest accuracy ? very ...

Nominal diameter: 2 in

The venturi nozzle is made with an inlet profile as per ISA according to DIN EN ISO 5167. The flow which is important and favorable for metering is achieved through the specific deformation process of the thermoplastic material. It allows ...

The 7000/8000 series by Clark Solutions is a line of flow meters with optional outputs. It is applicable for measuring the flow rate of liquids, gases, compressed air and steam in closed pipes. Clark Solutions manufactures an indicating ...

Dwyer's OP Series of orifice plate flowmeters is a comprehensive line of flow metering instruments. They are manufactured out of a stainless steel material, and incorporate a novel carrier or holder ring which includes integrated metering ...

The venturi tube MVR/FVR is a primary element for flow metering in tubings. The principle of the venturi tube allows for meterings with all media. The venturi tube has been especially designed for air flow metering in ventilation channels. ...

for differential consumption measuring Technical data Range: from 0.1 to 9'999'999 liter/hour Number of inputs: 2 (pulse) Display: 3" Graphic Display with back-light Operation: 4 keys Output for Fleet Manager or GPS-System Forward ...

This product is suitable for various industry applications, especially those that require measuring the flow rate of water, air or oil, with high accuracy. The product will also save plenty of money in the long run, being a cost-effective ...

Process pressure: 7000, 2500 Pa
Process temperature: -10 ?C - 50 ?C
Volumetric flow rate: 0 m?/h - 200000 m?/h

Process pressure: 0 psi - 250 psi
Process temperature: 0 ?F - 250 ?F

Gemini The Preso Gemini differential pressure flow meter has a cone-shaped element that shapes the flow profile ahead of the differential pressure (DP) measurement port without impacting the flow against a sharp surface, creating an ...

Process pressure: 25000 Pa
Process temperature: -20 ?C - 70 ?C
Volumetric flow rate: 100 m?/h - 200000 m?/h

Process pressure: 0 bar - 15 bar
Process temperature: -50 ?C - 300 ?C
Volumetric flow rate: 2 m?/h - 20000 m?/h

Flow rate: 2 l/s - 15 l/s
Nominal diameter: 52 mm - 803 mm

Process pressure: 0 bar - 15 bar
Process temperature: -50 ?C - 300 ?C
Volumetric flow rate: 2 m?/h - 20000 m?/h

Process temperature: 32 ?F - 150 ?F

This gauge can be mounted with 2 screws on the filter housing. They indicate the difference in pressure between intake and exit of the filter. If the difference is too large, the element must be changed. Round model: Indicates pressure ...

The DTP701 from Environnement S.A. is a stack flow meter, that can be used for municipal waste incinerators, hazardous waste incinerators, combustion plants, petrochemical industries, cement plants, glass plants and paper mills. The device ...

Series PG-2, 3, 4, 5, and 6 Differential Pressure Meters are kits designed to measure differential pressures on flow measurement valves and flow measurement orifices and provide overrange protection at an accuracy of +/- 3%. It consists ...

Process pressure: 0 bar - 690 bar
Process temperature: -200 ?C - 1240 ?C

The POP-U-S calibrated flow meters are instruments that measure the fluid flow in piping according to the EN5167- 2 Norm. They are available in different materials and sizes according to the type of fluid and flow that needs to be measured

Series PG-8 Differential Pressure Meters are kits designed to measure differential pressures on flow measurement valves and flow measurement orifices at an accuracy of +/- 5%. It consists of a dial gauge with free floating piston and ...

POP-S - E5720 rev. 05 - 20/03/13 www.esapyronics.com 3 APPLICATIONS The POP-S calibrated orifice flow meters are accessories designed for indirect air or gas flow measurement via the reading of charts, tables or instruments. The orifice ...

The FX Series gravity flow detectors employ a precision differential pressure transducer to detect liquid level variations in a measuring cylinder. The detectors are capable of measuring instantaneous and cumulative fuel flow. Applicable ...

Process pressure: 0 bar - 250 bar
Process temperature: -200 ?C - 1240 ?C

Process pressure: 0 bar - 100 bar
Process temperature: -200 ?C - 1240 ?C

Process pressure: 0 bar - 0.04 bar

Process pressure: 0 bar - 690 bar
Process temperature: -200 ?C - 1240 ?C