Chain pinions

Dedicated to racks & pinions drive applications, the KRP+ design is based either on the use of one single unit or on the association of two top quality planetary reducers, mounted in parallel on the machine main frame. When used as ...

This rack and pinion drive uses the new flange pinion in the design without supporting lug. This model is suitable for applications, in which the supporting bearing cover of the ZTRS has an interfering contour. The pinions with the welded ...

For the gear program you can choose form quite a number of output drive shafts with straight and helical tooth systems and various numbers of teeth. Technical Datas: Material 16MnCr5 Gearing grade 6 case-hardened Module 1,5 to 6 helical ...

The KRP+ design is intended for racks and pinions drive applications, and based around using a single unit, or two parallel mounted top quality planetary reducers, installed on the machine's main frame. When this model is utilized as ...

End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing. Hot Dip galvanized steel. TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY. Forged jaw ends are fitted with bolts and nuts for 6 mm ...

ATLANTA stainless driving elements allows to solve any application requirements in case of special environmental.

iwis not only manufactures sprockets and plate wheels according to ISO 606 but also customized versions built in accordance with your specifications, drawings or samples. Sprockets Our standard range of sprockets includes sprockets ...

For chain tensioning in load lashings and anchorages. NOT TO BE USED FOR LIFTING PURPOSES

The Ultra-High Precision Rack and Pinion Drive System from Atlanta Drive Systems can be used for rack and pinion applications, which require an ultra-precise positioning and repeatability. The system backlash can be removed with the two ...

An innovative replacement of the manual and troublesome lubricating methods of gear rims and racks is Dropsa Lubrication Pinion. It automatically and accurately determines the delivery of grease based on the destination. By enabling such ...

The REHOBOT WPT pull tensioner is used within the mining and tunnelling industry as lock tensioning equipment for steel wire rock reinforcement. The tool has a maximum pull force of 123 kN (13 t), but can upon request be restricted to ...

Atlanta's High-Precision Rack & Pinion Drive Systems use planetary and servo-worm reducers. These reducers have backlash levels to support a hardened and ground pinion. The system also employs a hardened and ground rack. The drives ...

Tensioners prolong the life of roller chains. Three variants of the tensioner are available: a rotary tensioner performs an automatic 90? tensioning action; a linear tensioner does linear adjustment automatically; and a fixed tensioner ...

The Zetasassi TA type chain tensioners from QTC improve performance in industrial automation applications by keeping constant tension in chain drive systems. These tensioners are designed to reduce noise, transmit torque more efficiently, ...

The ZR, ZTR series is manufactured by Atlanta Drive Systems. This high-performance rack-and-pinion drive system, has a nominal transmission ratios of i= 4:1 to 100:1, and maximum thrust force of 28200 lb. It is available with helical ...

The Stock Pilot Bore Sprockets are types of stock pilot bored sprockets that suit the British Standard for having chains in different forms. These include simplex, duplex, and triplex chains. These measure from 8 mm to 2"pitch. These ...

Chain Wheel Plates and Sprockets - Simpex, Duplex, Triplex; dependent on pitch and number of teeth available as simple or reinforced plate; with hub on one side; Materials: Steel, Cast Iron, Injection Moulded Acetal resin Sprockets with ...

Idler Sprockets These hardened, sintered-steel sprockets are an economical option for replacing most hardened plate steel units. Applications Agriculture Forestry

Atlanta presents medium-precision rack and pinion drive systems. The systems are based on Atlanta's precision planetary and servo-worm reducers for solid support and driving a hardened & ground pinion. These systems utilize Quenched ...

To complement its industrial chain catalogue, Sedis offers an outstanding choice of sprockets, taper bushes, platewheels and chain wheels. Products include taper bushes, sprockets with taper bushes, and sprockets, chainwheels and platewheels ...

The Cross+Morse offers a range of customized sprockets, platewheels, split wheels, ring-gears or segments according to both BS or ANSI roller chains, double pitch, cranked link or inverted tooth chains, including pitch of 1/4" to ...

A single two-component injection molding process is employed in the manufacture of these P?ppelmann guide rails. In this quick and efficient process, the two different materials are injected in a single process. The costly additional ...

NEW! Flange Pinion Material: steel 1.7131 [16MnCr5] Case-hardened 58+4 HRC Straight teeth or Helical, left hand, helix angle 19° 31´42´´ Pressure angle 20° Toothing quality 6 e25 Module: 2 - 5 In addition ...

The ICE-CURT-K 6 GAKO Series manufactured by RUD is a spindle tensioner that comes with a clevis connection. This device is made from solid and threaded bars which gives it's sturdy design. It is used for having the adjusted exact lengths ...

Sprockets and chains (taper-bush sprockets, reverse sprockets, chains)

When used in power transmission drives, all V-belts and roller chains will elongate significantly over time if not properly maintained. Incorrect belt or chain tension will lead to increased downtime, lower equipment productivity and ...

The Bug-O DC-IV is a dual speed range, positive rack & pinion drive, ready for mounting welding or cutting attachments and accessories. It consists of a DC-IV Drive unit mounted on a 12" (305 mm) Carriage. This unit runs on ...

Standard-Sprockets for Roller Chains to DIN and ASA - Custom Made Parts Our manufacturing capabilities for sprockets and plate wheels to suit your individual requirements: Sprockets Plate Wheels - Max. turning Ø 2 000 mm - Max. ...

MSR dramatically simplifies the VTL turntable mechanical transmission system. In many cases, it is also much more economical. Up to now, the conventional solution for VTL turntable drives has been composed of: a main drive (single ...

KRP+ planetary reducers are the SingleDRIVE components in a family of reducers dedicated to Rack & Pinion and Rotary Table drive applications. They can be used alone as a single drive or combined with a second unit to create a ZERO-BACKLASH ...

The new benchmark for electrical preload on demanding machine tool applications! KRPX is the new version of REDEX ANDANTEX rack & pinion high-tech planetary reducers, offering cost effective, easy to implement and high performing ...

DRP+ planetary gearboxes are the dedicated solution to ZERO-BACKLASH rack & pinion and rotary table drive applications. They consist of two top quality planetary reducers mounted in parallel inside of a super rigid universal housing. ...

Sprockets for HS-100 series Standard Teeth Choice:6T/8T/10T/12T/16T Standard Bore Choice:Square Bore=38.5*38.5mm/40.5*40.5mm/50.5*50.5mm Round Bore=25.5mm/30.5mm/35.5mm Other bore sizes in imperial ...

Sprockets for HS-100-HD series Standard Teeth Choice:6T/8T/10T/12T Standard Bore Choice:Square Bore=38.5*38.5mm/40.5*40.5mm Round Bore=45.5mm/47.5mm/30mm Other bore sizes in imperial units are available. For ...

Gear drives for cement industry Galbiati Group manufactures main and auxiliary gear drives for mills and kilns for cement industry. Galbiati Group recently implemented a main gear drive for mills and kilns addressed to the cement industry ...

NEW FOR 2015! ENGRENAGES HPC has widened its range of chain and belt tensioners and has introduced a new automatic range for 2015. The enlarged range now has 4 new types of tensioners: - Tensioners with a guide - Tensioners with ...

Leantechnik presents lean SL® gear rack lift drive featuring round gear rack guides. It has been designed for economical lifting equipment to give simple, simultaneous lifting movements. It is especially useful when there is no need ...

The product is enclosed within a housing that measures up to ? 78 mm, and is made from a sintered-type of steel. The device is also equipped with a ? 78 mm grey cast-iron GG20 and a lever St52, V-belt pulley cast steel. The device has ...

The Double-Sprockets ZRS Series is manufactured by Madler. The product has compact design because it is made of steel and the product is also pre-bored. The general dimensions of B1 measures 2.7 mm, B2 measures 8.3 mm, C measures 1.0 ...

The KRK Series is designed with bores ISO H8. It has metal inlays at the hub built with custom bore. This device also features feather key ways or threads that are used for set screw. Moreover, this product is available based on the amount and size.

The ROSTA tensioning element type SE-B (Boomerang) compensates the slack in extremely long chain drives. The Boomerang with its bended double arm, equipped with two sprocket wheels, offers a triple compensation of the slack.

The tensioning element with the specification SE (SE 11 to SE 50) is the mostly used standard unit for tensioning all kind of chain and belt drives. The elastomeric inserts based on a high elastic natural rubber with a good shape memory. ...

From 8 to 150 teeth Also available ready to install from drawing

Chain tensioning wheels For roller chains according to European design ISO-R606/DIN 8187

- Teknika Strapping Systems? smallest tool, easily fits on a tool belt - Simple and original design replaces generic entry-level tensioners - Smallest footprint, lightest weight, best gripping performance - Fewest number ...

Diameter: 99.3 mm - 147.7 mm

Modular plastic belt sprockets and idlers are utilized in modern conveyor systems to ensure that the conveyor runs smoothly and efficiently. It is important that these belt sprockets and idlers are designed and manufactured to the highest ...