Transmission chains

Chain Sling & Binder Chain Black-tempered Binder Chain with eye or clevis grab hooks on both ends.

Product Type: Tire Chain Type : 6/0 Finish: Bright Package/Quantity: 1' Number of Links: 6-1/2 Product Code: 214579 Made from Mild Carbon Steel Use to attach cross chain on the rim of tires Available in Zinc Plated upon request

Though it's referred to as standard chain, it's anything but. Our Standard Series chains, built to ANSI B29.1 standards, are manufactured to very specific requirements. The only thing standard about our chains are their ability to fit ...

RING LEADER? O-ring Chain Diamond%u2019s Ring Leader O-ring chain is specifically designed for applications that don%u2019t permit regular lubrication, requiring the chain to depend entirely upon initial factory lubrication throughout ...

Perfect for situations requiring greater corrosion resistance than SS Series. Non-magnetic, except for the clip.

Roller Chains to DIN - Simplex, Duplex, Triplex Roller Chains to ASA - Simplex Roller Chains to DIN stainless steel - Simplex, Duplex Roller Chains with plastic bearings, with extended pins Extended Pitch Roller Chains Bush Chains Chain ...

Stainless Steel Roller Chain (SS Series) with special engineering plastic sleeves inserted between the pins and bushes. Provides long life in dry or wet environments, even underwater. Rollers available in SUS304 stainless steel or engineering ...

RS Roller Chain plated with nickel for an attractive appearance and light corrosion resistance. Can be used in contact with water. Please be aware when selecting that there is a 15% reduction in allowable load compared to RS Roller Chain.

The Double Pitch Roller Chain is manufactured to ANSI B29.3 and ANSI B29.4 standards. Its dimension is similar to standard roller chains, but its pitch is doubled. This results in lower drive costs due to the reduced number of components ...

The 1001-G80 is manufactured by Toolee, and is a lifting short chain that complies with the EN818-2 standard. The body of the unit is available in a wide variety of alloy steel such as 80-grade, 8-grade, G80-grade, G8-grade, and T8-grade ...

Uses a special surface coating on the pin that does not lower its strength for protection against pitting corrosion, which leads to fatigue breakage. Outstanding performance in environments that promote wear, such as outdoors or in coastal areas.

Linear chains Advantages Ideal if you have to implement long strokes Ideal where the available space is insufficient for a solution with "normal" linear drives The chain can be wound up and stored It holds the absolute ...

The LinearChain is able to move loads horizontally and vertically. The LinearChain is made of specially formed links, whose geometry prevents the chain from buckling under load. This allows the LinearChain to work like a conventional ...

Eberhard offers a variety of holdbacks for your specific applications such as: wire from, rubber, chain, spring loaded, or plastic. Each option offers its own benefit from corrosion protection to tolerance issues. These are great options ...

Madler presents single-strand roller chains. They are in accordance with DIN ISO 606 (ex DIN 8187). They are made of special chain steel. They feature top quality simplex roller chains, which are pre-stretched as per DIN. Waisted link ...

Fabric: toughened steel. Standard: measurements consistent with DIN 8187 (European norm of structure)

Roller Chains British and American Standard, Side bow chains Fleyer Chains Light conveyor chains Transport Chains Chain packages Length in meters (Standard): Box, 5 m Rollers, 25, 50 or 100 m Cut sizes (upon request): Open Ready ...

Ratchet lashing : Detailed Product Description 1) Material: polyester, nylon 2) Manufactured to EN12195-2 AS/NZS4380 3) Type: 25mm, 35mm, 50mm, 75mm, 100mm 4) Safety factor: 2:1 5) Working length: as specified 6) Color: blue, yellow, ...

Material: Similar to Chain KE, but inner links from standard polycarbonate, with lower chemical resistance. Outer links from stainless steel 1.4301. Main dimensions according to DIN. Very light and silent running. Very clean due to closed ...

APSOparts? drive technology hosts a family of chain- and steel band drives that include the REGINA roller chain Duplex 221 with ISO 06B-2. The roller chain is constructed from hardened steel in a European-type design with dimensions compliant ...

RPV is high performance inverted tooth chain, specifically designed to meet or exceed the capability of all other high performance chains. Capable of speeds in excess of 7000 fpm and loads exceeding 3000 hp, RPV's strength and load capacity ...

Ratchet lashing : Detailed Product Description 1) Material: polyester, nylon 2) Manufactured to EN12195-2 AS/NZS4380 3) Type: 25mm, 35mm, 50mm, 75mm, 100mm 4) Safety factor: 2:1 5) Working length: as specified 6) Color: blue, yellow, ...

The K1 is a slim version roller chain that is equipped with attachments constructed in accordance to DIN ISO 606. Each attachments is spaced 2 x p at each outer link. This roller chain is available with various types of attachments and ...

RP or RamPower series silent chain was designed to operate on sprockets manufactured with an ASME Standard tooth profile. Available exclusively through Ramsey, RamPower offers twice the power capacity of SC series chains and speeds up ...

Similar to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality duplex roller chains, pre-stretched according to DIN. Main dimensions according to DIN, but with straight link plates, to use as conveyor chain or drive ...

Round-Link Steel Chains DIN 766 A are made of zinc-plated, quality steel. The chains are characterized by short links and are true to gauge. They are certified under quality class 3. Various stock lengths are available but only with ...

We construct our Extended Life CHP chain using chrome-hardened pins that provide an extremely hard, wear-resistant surface, which decreases the wear between the pin and bushing. This reduces chain elongation and can increase wear life ...

The TS series is manufactured by Leitz, and is a mortise chain that is ideal for use in applications such as mortising both rectangular single slots and rectangular double slots. It can be equipped in a number of machines which includes ...

Roller chain with straight side plates according to ISO 606, DIN 8187, DIN 8188, ANSI, Britisch Standard Model article number: -

Chain KLA GrabiQ Heat treatment Hardened and tempered. Note! For chain grade 10 the maximum in service temperature is 200?C. Surface treatment Bluepainted Marking 10G

Highlights: ? Wide range of products ? Dimensions according to ISO 1275 ? Versions with small rollers and transport rollers available ? All ELITE chain plates 1 are manufactured using processes such as fine blanking and ball-drifting, ...

Roller chains are frequently used in machine and plant construction, not only as drive and gear chains, but also as lantern gears, hoisting and conveyor chains as well as in special designs with different attachments for transport and ...

iwis Leaf chains (according to works standard) are produced from precision chain parts according to ISO 606. They can be customized and are compliant with the EC Machinery Directive 2006/42/EC. Highlights - iwis link plates with very ...

The clear structure of roller chains with standardized attachments allows engineers in plant and machine construction a high degree of freedom for their individual constructions. Standardized attachments are perfect to affix individual ...

This is a standard for power transmission roller chain and complies to

??????Our System Plast? products provide for a broad chain offering. They present solutions for a multitude of conveyor applications. The food and beverage industries are examples where System Plast chain products excel. System Plast ...

iwis offers a wide range of roller chain products that fulfil the requirements of a variety of conveyor applications. We can supply virtually any special chain version ? even the most difficult and complex design ? for use in highly ...

Small Pitch Conveyor Chain are used in a wide variety of applications such as packaging, food, cosmetics, pharmaceutical, manufacturing and many other industrial application. These chains are manufactured based on the components of standard ...

Gripchains with wear-resistant and corrosion-resistant clamping elements are used for gripping, pulling and transporting thin-walled materials with large surface areas. For example, in the packaging industry, the food industry and the ...

WINKEL BEARINGS Simplex precision roller chains were designed according to DIN 8187-1 ISO 606-1982 European specifications. They are available with pitch values of 19.05, 25.40, 31.75 and 38.10 mm, inside widths of 11.68, 17.02, 19.56 ...

Precision Roller Chain Primary Features Wide-Waisted Link Plates Shotpeened, wide-waisted link plates are manufactured with maximized ball heights from special alloy steels for added strength for chain sizes 60H and above. The wide link ...

Renolube Escalator Chain has been developed as a result of extensive prototype testing in arduous applications to exceed the industry's ever increasing demand for lower service costs and longer lifetime operation. Renold is recognised, ...

The Precision Roller Chains have satisfied the British Standard (B.S.) and American Standard (A.N.S.I.). They are specifically made having a 1/4" to 2.1/2" structure, in simplex and multi-strand forms. These are intended to be used for ...

Engineered Class Chain Our line of engineered chain is designed to provide optimal performance for specific applications. Our offering includes: Automotive Caterpillar Drive Chain Material Handling Carbon Chain Stacker Reclaimer Chain ...

Renold has extensive experience in supplying theme parks around the world with conveyor chain for theme park rides, from roller coasters to water rides. Through continuous research and development and examining the common causes of ...

This device can be used for transporting a wide range of attachments. These can include the standard stock K and M plates, the extended pins and hollow pin chain. It can also be used for transporting many attachments that have been custom ...

The Scraper chains are used in 'Redler' conveyor systems for horizontal or slanted transport of powder or granular bulk materials. Depending on the type of transport to be carried out the outer chain links can be bent as scrapers or alternatively ...

The H-V, SC series is manufactured by Cross & Morse. It is an inverted tooth chain, that is designed for the transmission of high torques with high shaft speeds. Features of the series include smooth running drives, with low noise level, ...

The Drop forged chains are used in 'Redler' conveyor systems for horizontal or slanted transport of powder or granular bulk materials