Power chokes and inductors

Current: 0 A
Voltage: 0 V

Current: 0.5 A - 15 A
Voltage: 0 V - 440 V

Current: 0.7 A - 1.7 A

Current: 0.16 A - 0.85 A

Current: 0.04 A - 4.7 A

Current: 0.55 A - 1.55 A

Current: 0.6 A - 2.4 A

Voltage: 380 V - 400 V

Inductor design and manufacture continues to be one of eldec?s core competences. The inductor forms the foundation of every eldec induction machine. Every inductor is specifically made-to-order for a workpiece. The basis of this is the ...

The high efficiency unit features a standard design that is suitable for use with detuned capacitor banks. The reactors posses high linearity, low losses and a minimal noise output, while the inductance is set to the exact value of 1/+3%. ...

Current: 2 A - 110 A

Current: 400 A - 2300 A

Current: 10 A - 200 A

Current: 16 A - 50 A

This device is designed for inductance, frequency, RMS value of the current (instantaneous RMS value peaks) , voltage level, and AC or DC choke. If DC, the value and frequency of the AC component are needed. It features a safe construction ...

Current: 10 A - 280 A
Voltage: 500 V

Current: 1 A - 2100 A
Voltage: 230 V - 690 V

Current: 1 A - 460 A
Voltage: 0 V - 528 V

Current: 7 A - 45 A
Voltage: 440 V

Voltage: 220 V - 1140 V

Add VTdrive DC Link Chokes in series with the internal DC bus to: Reduce AC Input Line Harmonics Help Meet IEEE-519 Limits Absorb Voltage/Current Spikes Reduce AC ripple on DC bus Reduce dV/dT and dI/dT rates Solve nuisance overvoltage ...

Current: 5 A - 30 A

Features Compact size, low profile Shielded construction allowing for high density mounting Lowest DCR/uH in this package size Manages high transient current spikes without saturation Applications Switch power supplies DC/DC converter Mobile ...

Current: 3 A

Current: 11.2 A

Current: 20 A

Materials: a. - Core : Ferrite DR core b. - Core : Ferrite RI core c- Wire : Enamelled copperwire (class F) d. - Base : LCP E4008 e. - Adhesive : Epoxy resin f. - Terminal : Cu / Ni / Sn

Line traps direct the high-frequency telecommunication signal to the appropriate lines, blocking the transmission to the others, and avoiding losses and interferences.

Copper and silver alloyed copper magnet wireor continuously transposed copper cableis used for the winding conductors on all Waukesha? power transformers. Continuously transposed copper cable is used to minimize losses and hot-spot temperatures ...

KEB COMBILINE Mains Input and Motor Chokes The B6 rectifier input circuit in the input of variable speed drives causes current ripples that strain the DC-bus capacitors in the inverter and generate harmonic distortions in the utility ...