Voltage measuring devices

The ROHM voltage detector IC series are reset IC with highly accurate detection voltage of ?1% , low current consumption, small thin packages and wide range of detection voltage. They can be used for every kind of application equipped ...

The Chauvin Arnoux SHT40kV is a hand held high voltage probe. The SHT40kV probe is designed to measure voltages referenced to earth, 40 kVDC or peak and up to 28 kVAC (50/60 Hz) and suitable to be used with any existing multi-meter. ...

Chauvin Arnoux test measurement voltage absence testers (VATs) C.A 740N and C.A 760N check for the absence of voltage in compliance with Edition 2 of the IEC 61243-3 standard workplace legislation on the protection and safety of electrical ...

The HT2055, generally composed of a station and a meter-designed model, is generally designed to perform step-contact voltage measurements on electrical installations involving HV power station (TN system, electrical substation) with ...

The HT20 is a pen voltage detector engineered by HT Instruments. It is constructed in compliance to IEC/EN61010-1 safety standard in CAT IV 1000V. The device detects AC voltage from 100V to 1000V, at an operating frequency rate of ...

The FLIR VP52 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP52 to ...

In just one or two seconds, an operator can find out whether if it is secure to work around regions such as: transformer gear and circuit splitter housings, power ground wires or freshly-driven earth rods transportable dwellings, metal ...

PROFITEST PRIME The first All-in-One Tester for electrical equipment, machinery, industrial machinery, wind turbines and many other fields of applications. Thanks to the wide range of potential applications and versatile test ...

Telescoping Rod for Measurement of PE and RISO, 120 cm. TELEARM is used as a test probe extension. The test probe of the test and measuring instrument is plugged into the connector of the handle by means of the connector coil cable ...

? Clear and unambiguous indication of measured values on TFT display ? Easy operation and parameterisation via touchscreen or via CB-Configurator Software ? Automatic cyclical scrolling of measured data ? Integrated active and reactive ...

? Clear and unambiguous indication of measured values on TFT display ? Easy operation and parameterisation via touchscreen or via CB-Configurator Software ? Monitoring and analysis of harmonics (U, I) ? Integrated active and reactive energy meters

The TensION, manufactured by SimcoIon, is a high-voltage detector which is used to check AC/DC Simco-Ion discharging and charging device. It provides information about the presence of a high voltage on the inosing emitters or charging ...

Voltage: 0 V - 600 V

Voltage: 0 V - 600 V

MPC-5/50 is a GETEST unit that for measuring the voltage differences between ground points, conductive parts or earth. If users notice leakage currents through earth, this item will come in handy. In certain countries, these measurements ...

The digital universal measuring device PEM555 is suited for measuring and displaying electrical quantities of a public electricity network. The PEM555 is able to perform current, voltage, energy consumption and performance measurements ...

The PEM330/333 is specifically designed to provide an extremely high quality performance and functionality. It is a universal measuring equipment which is intended for use in recording and indicating the electrical quantities of a public ...

The LINETRAXX? PEM735 is a digital universal measuring device designed to measure and display electric amount of electric networks. This equipment calculates voltages and currents as well as power consumption. It shows the individual ...

Digital voltmeters-ammeters are designed to monitor both AC current value drawn by the loads and the voltage value of the relevant phase continuously. Descriptions: Use the 100A current transformer provided with the device.

Digital voltmeters-ammeters are designed to monitor both AC current value drawn by the loads and the voltage value of the relevant phase continuously. Descriptions: Use the 250A current transformer provided with the device.

Raptor Polarity Tester The Raptor Polarity Tester is a simple handheld probe that helps you quickly verify the various connections in a three-phase installation for correct polarity, while the Raptor injects an asymmetrical waveform ...

The Elektrofeldmeter is a field strength meter incorporated with a frequency range of 1Hz to 1GHZ. It is constructed in accordance to EMC/EMI standards and is capable of testing a maximum frequency that reaches 50 MHz. This field strength ...

The High-voltage Detector Series HVP-275 is manufactured by Tecpel, is a high voltage proximity detector that has eight voltage detection settings and is integrated with a power of 240Vac to 275kVac. It utilizes 3 x 1.5V "C" batteries ...

These are LF-190E, LF-210E and LF-250 by Tecpel Co is an Oscilloscope probe which is designed for wide range of applications. For LF-190E, it has a 60 MHz rating and comprises of item 10 and item 1. The item 1 has a rating of DC~3MHz(+/-1dB) ...

The TR, TRL and TRC by Sibille Fameca Electric is an insulated rod which features its compliance to IEC 60855-1 and IEC 61235-S. For this model, it can be used in checking for the absence of voltage. These TR poles come with 4 ranges ...

Voltage: 1000 V - 30000 V

Voltage: 2000 V

Voltage: 2000 V

Voltmeter and ammeter Mechanical characteristics: DIN rail mounting 3 modules Auxiliary supply: 230 Vac 50-60 Hz Voltage inputs: 3 inputs 500 V max Currents inputs: 3 inputs 0,05?5A rms with external CT ratio programmable Option ...

The DVA3D by Dossena is a Multi-function electrical measurement device which is designed for reading tension and current on three phases. The measurement it gives follow a TMRS standard. Its power source is self-supplied and its use a ...

RPT2 and DCT/V are innovative instruments expressly dedicated to railway. RPTS detects the voltage presence on dc power circuit for railway traction, for inhibit the switches control or other security part (like for example padlocks) ...

Voltage: 0 V - 750 V