Swivels, rollers

rod end housing: forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized inner ring: ball bearing steel, hardened, superfine ground lubrication: Polyrex EP2 or soap complex temperature ...

DBF: Spherical Rod End, Female, Bronze Race, DIN Metric

Outer diameter: 10 mm - 20 mm
Inside diameter: 3 mm - 6 mm

rod end housing: forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized inner ring: ball bearing steel, hardened, superfine ground lubrication: Polyrex EP2 or soap complex temperature ...

Outer diameter: 13 mm - 110 mm
Force: 850 N - 69000 N
Inside diameter: 4 mm - 40 mm

DBM: Spherical Rod End, Male, Bronze Race, DIN Metric

Rod End Bearings are a mechanical articulating joint. The device is also known as a heim joint in North America or a rose joint in U.K and everywhere else. It is used on the ends of cylinders, linkages, rods, and shafts to take up any ...

The unit is a back-up straightening roller that is suitable for use in all kinds of equipment in plants. It is manufactured by Unitec, and provides the model that complies with the user's specifications. With this, it has the capacity ...

Outer diameter: 9 mm - 26 mm
Inside diameter: 7 mm - 24 mm

Outer diameter: 55 mm - 115 mm
Inside diameter: 21 mm - 42 mm

Rod end with spherical plain bearing has high rust and chemical tolerance, with maximized ? 30 mm and M27 x 2 dimensional coefficients. It is lightly structured, ideal for rotary, oscillating and linear movements of motor. It embodies ...

The CF series manufactured by Chiavette Unificate S.p.A. is a female rod end which is designed to have a coupling that is made from either steel or bronze. For this specific model, it is self lubricating and can be used to certain applications ...

We produce all about door and window roller assemblies, including sliding door rollers for vehicles. Combination with metal / plastic roller and housing. With 35 years manufacturing experience, we have made both OEM and ODM rollers for ...

Rod end bearings with male thread, igubal? from igus, are self-lubricating and high maintenance. The bearings have high rigidity and also offer high fatigue strength under different loads. These are ideal for rotary, oscillating and linear ...

The CM series by Chiavette Unificate S.p.A. is a Male rod end which is designed to have a coupling that is made from either steel or bronze. For this specific model, it is self lubricating and can be used to certain application such as ...

These igubal? rod end bearings CL units feature a smooth design with no dirt traps. They are crafted from Variable iglidur? spherical ball materials and are able to make up for alignment errors. Furthermore, these products are lightweight ...

The CF OK series manufactured by Chiavette Unificate S.p.A. is a Female rod end which is designed to have a coupling that is made from either steel or bronze. For this specific model, it is self lubricating and can be used to certain ...

Outer diameter: 40 mm

The igubal rod end bearings are easily detectable and resistant to dirt and dust. They are ideal for working environments where there is the presence of dust or dirt. It requires absolutely no lubrication. It is capable of operating smoothly ...

The CM OK series, manufactured by Chiavette Unificate is a self-lubricating male rod end. Furthermore, the device is suitable for general engineering applications.

Outer diameter: 35 mm - 40 mm

To guide moving parts in the slot of the aluminum profile, with ball bearing Material Nylon PA, glass ball reinforced Color Black Pack Quantity 10 pieces Specials conductive, other colors on request

Each iglidur? substance boasts of a sequence of extraordinary features which explain its appropriateness for assured applications and necessities. At present we present you round balls constructed from iglidur? fabrics W300 (normal), ...

The CFX series manufactured by Chiavette Unificate S.p.A. is a female rod end which is designed to have a coupling that is made from either steel or bronze. For this specific model, it is self lubricating and can be used to certain application ...

Brand Name: LS Bore Size 15 - 80 mm Place of Origin Fujian, China Sliding contact surfaces Steel/Steel Permissible operating temperature range: -50?-+150? Rod end with male or female thread is made up of a rod end and a radial spherical ...

The BJT rod end is used in rotary, oscillating and linear movements, even in particularly aggressive environments and when water or humidity, fine dusts, dirt, fabrics and machining residues are present. It is made up of glass-fibre reinforced ...

Brand Name LS Bore Size 5 - 30 mm Model Number SABP...S, SIBP...S Place of Origin Fujian, China (Mainland) Sliding contact surfaces Steel/Bronze Permissible operating temperature range 50?-+150? Rod end of steel and zinc ...

OAV's mounting screws are made out of carbon stainless steel. They are specifically designed to satisfy aerospace quality standards. The units are always in parallel orientation. They are easily installed, and equipped with ball end ...

The Universal Cam Followers are designed with a unique lubricating feature. It allows relubrication through the hexagonal head of the cam follower, making relubrication in tight spots possible. In addition, the Universal Cam Follower ...

FJT forks are made of glass-fiber reinforced polyamide based (PA) special technopolymer with great resistance to oils, solvents, greases and other chemicals. The standard executions of the forks include a threaded hole - FJT+PC with clip ...

Rod ends are specifically designed to be used for hydraulic cylinders. Ball joints and ball join-ends are typically used in a wide array of industrial applications together with yokes and pins. For the agricultural field, ball joints ...

Force: 0 N - 300000 N

Gas Spring End Fittings & Mounts - Ball Joint Assembly are fittings to position a gas strut in place

Outer diameter: 80 mm - 100 mm
Force: 380 daN

Construction: Stainless steel with nylon roller Temperature Range: 32 to 230?F Mounting: 31/64 dia. mounting hole fits #15/32-32 threaded mounting section of valve bodies Operation: Mounts to valve body, actuates valve when mechanically ...

Outer diameter: 16 mm - 35 mm
Force: 3800, 3700 N
Inside diameter: 6 mm - 16 mm

Owing to 50 years experience in the industry, we are able to solve any motion problems, working out and designing the ideal product for customers' needs. We supply complete solutions that foresee the use of components which are assembled ...

Outer diameter: 40 mm - 110 mm
Inside diameter: 0 mm - 7000 mm

Outer diameter: 10 mm - 250 mm
Force: 1200 daN

The Jesa Bearing solutions provide the Over-molded Bearing, designed for different areas of application. The tool offers long life, high allowable loads, low wear, and quiet operation due to the synthetic material and optimized design. ...

NMB-Minebea is one of the leading manufacturers of rod-end and spherical bearings for the aerospace industry, as well as for industrial applications. The bearings are produced in the USA, Japan and other countries. In Europe, our subsidiary ...

Gates manufacture tensioners which are utilized for extreme applications involving damping, vibration, tension and alignment on particular attachments for engine drives. These automatic devices are made with stable and firm design structures ...

Angle joints have hardened ball sockets and are secured with a spring retainer or safety bracket. Model with right-handed or left-handed threads or with rivet pins form C / CS / B / BS. Sealing rings available for all sizes. The following ...

Wheel-diameter (D): 40 Tyres: POM Hub length (T1): 29 Axle bore (d): 8

Gates manufacture tensioners which are utilized for extreme applications involving damping, vibration, tension and alignment on particular attachments for engine drives. These automatic devices are made with stable and firm design structures ...

Outer diameter: 10 mm - 21 mm

Crowned Bearings recommended where the track or cam may impact excessive thrust loading on the bearing due to misalignment.

Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).