Submersible pumps

Suction dredging Cutter pump * general dredging tool for silt, sand, mud, sludge * discharge distance up to 1,5 km * high capacity * submersible pump

VLT is a vertical process pump of the double casting type, as defined by API-610 specifications. The multi-staging series stages in the medium and low specific speed design range produce outstanding efficiencies and reduce ...

Pressure: 0 Pa - 360 Pa

Flow rate: 1500 m?/h - 180000 m?/h
Head: 3'00" ft - 19'00"

Flow rate: 0 m?/h - 100 m?/h
Head: 1 m - 25 m

Pressure: max 100.0 bar

Flow rate: 5 m?/h - 85 m?/h
Head: 8 m - 45 m
Power: 0.25 kW - 11 kW

Pressure: 0 bar - 516 bar

Head: 6 m - 24 m

Flow rate: 0.1 m?/h - 3.7 m?/h
Head: 1 m - 6 m
Power: 400 W

Flow rate: max 12000.0 l/h
Pressure: max 2.8 bar
Power: 250 W - 850 W

... its low maintenance. Consequently, this pump has acquired an excellent reputation for its performance in draining polders and low level areas, as well as in irrigation and pumping effluent. Principle ...

The Verder VPI series is an array of drum pumps that can be used to empty tanks, drums, settling ponds as well as settlement tanks. These compact pumps are available in 4 submersible ...

Flow rate: 6 m?/h - 18 m?/h
Head: 6 m - 21 m
Power: 1.91, 2.4 kW

Flow rate: 100 l/min - 1500 l/min
Power: 0.75 kW - 7.5 kW

Flow rate: max 9600.0 l/h
Pressure: max 2.75 bar
Power: 250 W - 850 W

Flow rate: 105 m?/h - 150 m?/h
Head: 16 m - 45 m
Power: 9.2 kW - 18.5 kW

Flow rate: 6 l/s - 1577 l/s
Head: 1.5 m - 76 m

The OSIP ZS 65 - 75 - 80 - 100 - 120 - 125 - 180 - 200 - 220 is a low pressure industrial electronic pump. This device is used for pumping liquid coolants and lubricating mixtures. The ZS Series is applicable ...

... transmission shaft and suction funnel could be picked according to fluid surface of the slurry pool and it is fit to run easily under different speeds. The EVR series sump pumps are comparative in ...

... related problems. Trico?s Drum Pump Filtration System can prevent contamination or remove it when used in daily operations, including filtering oil directly from the storage drum to fill totes and transfer containers. The ...

... and this increases the wear resistance towards sand. Pump casing in SS304. Pump Shaft in SS410. Hex Rubber Bush and Stainless Steel Sleeve with hard chrome increase the wear resistance of this pump ...

... products. The INDAR SP Series consist of submersible pumps that is specially designed for pumping waters in various kinds of application, while the INDAR RO Series are surface ...

Flow rate: 70 l/min
Head: 6.3 m
Power: 0.15 kW

Flow rate: 600 l/min
Head: 20 m
Power: 7.5, 5.5 kW

The Drum STP125 Food Grade Cargo pump is a stainless steel pump specifically designed for the transfer of food-grade products from tank trailers. The new seal design offers the option of a double lip, ...

Material Construction and Configuration : 1. Pump Casing and Motor Cover : Cast Iron GG25 ; Ductile Cast Iron GGG40 ; SS304 316 316L; 2. Pump Impeller : Cast Iron GG25 ; Ductile Cast Iron GGG40 ; SS304 ...

... Vertical Slurry Pump ?? EVM(R) Series The EVM(R) series pumps are centrifugal, vertical slurry pumps submerged in sump during operation. They are designed for delivering highly abrasive, ...

Flow rate: 25 l/min - 60 l/min

... we can't avoid transfer pumps with low entry coolant systems, we try to minimize the problems associated with their installation and operation. The objective of good sump/transfer system design should be to have reliable ...

Flow rate: max 8400.0 l/h
Pressure: max 12.0 bar

Flow rate: 0 l/min - 50 l/min
Head: 0 m - 16 m

Material Construction and Configuration : 1. Pump Casing and Motor Cover : Cast Iron GG25 ; Ductile Cast Iron GGG40 ; SS304 316 316L; 2. Pump Impeller : Cast Iron GG25 ; Ductile Cast Iron GGG40 ; SS304 ...

Propeller pumps are of an axial type, i.e. water flows into a suction bell mouth axially passing via impeller and stator diffuser, being further directed through a discharge pipe to the piping. The pump ...

Flow rate: 0 m?/h - 5500 m?/h

Flow rate: 11 m?/h - 400 m?/h
Head: 50 m - 76 m

The Lutz Pump Set B2 Vario PP Set consists of Lutz-nozzle PP, wall bracket, hose clips, 1,5m PVC spiral hose 3/4" and Lutz B2 Vario polypropylene. An integration of the entire set with a 200 W internally ventilated motor ...

... p = 40 bar t = 5 - 80 ?C nmax = 1450 rpm APPLICATION Primary use of well pumps is for supply of drinking water, water used in industry and agriculture, and oils. Due to small diameters they are especially ...

Flow rate: 0 m?/h - 5500 m?/h

The XT series, manufactured by CEMP, is a submersible centrifugal pump that features a construction that is resistant against explosion. This tool consists of a 4 m head and has a stem that measures from ...

SPP Pumps submersible pumps are custom engineered for the oil and gas industry. Pumps are of the vertical turbine design and can be provided in either single or multi-stage ...

This series is professional design and develop to the high viscosity resin, sealant and hot melt materials are heated and output from the original drum. The finlike, anti-stick coating with the heating follower plate provide more efficient ...

This pump set is particularly useful when it comes to thin-bodied fluids, including oil-based lubricants, cleaner solvent, plasticizers and other materials, being useful for applications such as filling small ...

The Magnum is a submersible pump manufactured by FAN. Its framework comprises of a pump control that integrates a thermistor tripping unit as well as over-current relay to deliver optimum ...

Flow rate: 20 l/min
Pressure: 3 bar - 12 bar

... series pump is for high viscosity resin materials or greases. The materials transport from original drum directly. The advanced control avoid to the operation of error involved in the air. Output viscosity up to 2,000,000 ...

... users can choose the version with 460W, which offers a 75l/min delivery rate. The immersion lengths available for this product are 1,000 and 1,200mm, while the pump set also includes a stainless steel ...

Flow rate: 10 l/min
Pressure: 3 bar - 12 bar

Flow rate: 2300 m?/h

Flow rate: 0 m?/h - 2800 m?/h
Pressure: 10 bar
Head: 0 m - 120 m

The "Acids" set of Lutz drum pumps are specially designed for use with thin-bodied acids. Specifically, these are ideal for use with citric acid, chromic acid, hydrochloric acid, ferric (III) chloride, phosphoric acid, ...

Flow rate: 0.1 m?/h - 170 m?/h

Pressure: 70 bar - 140 bar

Flow rate: 0 m?/h - 600 m?/h
Pressure: 10 bar
Head: 0 m - 80 m

... one. This pump can deal with the material with viscosity of up to 500 mPas in the first and up to 800 mPas in the second variant. The immersion length of the pump can be 1000 mm or ...

Flow rate: 0.1 m?/h - 90 m?/h
Head: 10 m

Flow rate: 0 m?/h - 550 m?/h
Pressure: 0 bar - 16 bar
Head: 0 m - 150 m

Flow rate: 6000, 4000 l/s

Flow rate: 0 l/min - 820 l/min
Pressure: 0 bar - 50 bar