CÔNG TY CỔ PHẦN VNATION
Hotline:
0939 021 319 / 0988 930 207
Home
Products
News
Services
Support
Contacts
Home
Metrology - Laboratory
Inspection and Monitoring
Signal conditioners
Signal conditioners
Inspection and Monitoring
Conventional microscopes
FEM microscopes, X-ray microscopes, Electron microscopes
Endoscopes, Borescopes, Fiberscopes, Videoscopes
Robotic crawlers, UAVs ...
Line-scan cameras
Industrial CMOS area scan cameras
Other industrial video cameras
Infrared cameras and scanners
Industrial vision sensors
Industrial vision systems
Camera optics
Inspection machines for the electronics industry
Visual inspection machines, Video inspection machines
Machine condition monitoring
Data acquisition systems
Signal conditioners
Temperature data loggers, flow data loggers, pressure data loggers
Current data loggers, voltage data loggers, energy data loggers
Data loggers: Shock, vibration, fleet management
Environmental data loggers: temperature/humidity data loggers ...
Chart recorders, paperless recorders, videographic recorders
Data-loggers
network communication unit for sensors
DL series
Reading judgment results and measurement values, control input, and changing tolerance values can be executed by connecting DL Series to connectable sensors to communicate with a PLC and PC.
galvanic isolator
DL series
Intrinsic safety barriers are the core of Pepperl+Fuchs' product portfolio. We offer the widest selection of products for protection of electrical signals located in hazardous areas. These intrinsic safety modules combine the energy limiting ...
galvanic isolator / short-circuit / inherently safe
9162 series
Compact limit value switch with 2 configurable limiting values and 4 ... 20 mA output Suitable for 2-, 3-wire transmitters, 2-wire HART transmitters and mA sources Intrinsically safe input [Ex ia] IIC Open circuit ...
galvanic isolator / with digital output / inherently safe
9172 series
For binary signal and control circuits Intrinsically safe inputs or outputs [Ex ia] IIC Galvanic isolation between inputs and outputs For use up to SIL 2 (IEC 61508)
galvanic isolator / short-circuit / power / analog input
9160 series
Stahl 9160 series are high performance transmitter supply units , up to SIL 2 (IEC 61508. The features intrinsically safe input and galvanic isolation between input, output and power supply [Ex ia] IIC. The 9160 is equipped with open ...
galvanic isolator / analog input / inherently safe
9164 series
The mA - Isolating Repeater Series 9164 is ideal for integrating 2 wire I/O cards with 4-wire transmitters. Through this product, it is possible to interconnect active 2-wire inputs and mA sources. 4-wire transmitters can be connected ...
galvanic isolator / current / loop-powered / inherently safe
RB223
The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications:Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to ...
frequency-to-analog signal converter
9164 series
RHEIN TACHO F/I F/U converter helps in converting frequencies into a normalized linear analog signal. It offers a 12 bit signal resolution measuring time and period count. The device not only offers good linearity, high temperature stability ...
DIN rail signal converter
max. 20 mA, 10 V
The 88950108 from crouzet is signal converter designed for voltage conversion. It uses current for input, and voltage output for output. It incorporates 4 Channel 0-20 mA to 0-10 V to Convert Sensors with Current Output to Work with M3 ...
temperature regulator signal converter
-20 °C ... +600 °C
The Crouzet temperature converters features an input of a Pt1000 3-wire or Thermocouple J and K with varying input ranges of -20 to+150 ?C , -40 to+40 ?C and 0 to+600 ?C . Moreover, analogue inputs are used by this kind of sensor in ...
galvanic isolator / current / loop-powered / 2-channel
RB223
The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications:Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to ...
signal isolator / galvanic / current / analog input
RN221N
The active barrier RN221N supplies e.g. a transmitter with power, if required also in the Ex-area, and then transmits the galvanically isolated signal. With the optionally available HART? monitoring the status of the transmitter is monitored. ...
temperature regulator signal converter / galvanically-isolated
CC-E series
The analog signal converters are ideally suited to the requirements of measuring and processing electrical and physical values. Conversion, measurement and isolation of: Standard signals (0 - 10 V, 4 - 20 mA, etc.) Temperature ...
electro-pneumatic signal converter
ANTLIA
US.3 is a convenient and affordable ultrasound regulator instrument that is used in rewinding applications. It can also be utilized for open loop torque control which is fully equipped with a brake, clutch or motor. It also provides precise ...
USB load cell signal converter
FSH03456
The all new USB 220 External USB Kit removes the use of analog amplifier and old power supply. Instead of relying on a different power source, it can be supplied through the PC by the use of a USB cable, also giving excitation voltage ...
transmitter signal converter
5 - 24 V, 15 bit
This Sensor Signal Broadcaster is manufactured by Bei Sensors. The tool is capable of accepting the standard incremental encoder inputs. It can broadcast up to four encoder signals to four independent devices. Each of the broadcast signals ...
IC multiplexer / analog
LTC139x series
The SPI and I2C controlled multiplexers from Linear Technology are made for data changeover operations and industrial analog switches. The series features a supply voltage range from 3V to +/-15V, and either 4 or 8 channels. The models ...
power amplifier controller
LTC1xxx, LTC440x series
The Power Amplifier Controllers by Linear Technology are series of RF power detectors that is incorporated with loop controllers for controlling processes PA power in cellular handsets that initiate proper monitoring of voltage. The Amplifier ...
signal isolator-converter
SINEAX TV819
? Standard and non-standard signals ? Safe isolation, enhanced up to 600 V (Cat. II) or 1000 V (Cat. I) ? Manual zero and span calibration
DIN rail signal isolator-converter
SINEAX VS50
? 3-way galvanic isolation ? Spring-cage clamp connection ? Power bridging terminal DIN rail bus connector ? Compact design, width only 6.2mm ? Accuracy 0.1%
galvanically-isolated signal converter
SGS-61
Separator SGS-61 permits the input of complete galvanic segregation across the transmitter and the receptacle of 4-20 mA current ring. It can also allow attaching of multiple receivers with basic features in a single current ring. Owing ...
DIN rail signal isolator-converter / intrinsically safe
TV500Ex, ST500Ex
TV500 isolating signal converter can be used to isolate and convert field signals 0/4..20 mA or 0/2..10 V DC out of the intrinsically area. The ST500 provides a fully floating isolated transmitter supply. Technical data Power supply Supply ...
frequency-to-voltage converter / frequency-to-current / serial / 0-20mA
MUIFW series
Coupling modules from Murrelektronik can disconnect, switch, or convert voltage - even where space is at a premium. Our product portfolio comprises a diversity of relay and optocoupler modules that use the practical terminal block format. ...
DIN rail signal isolator-converter / dual-channel
TV500P
Loop powered signal converter series TV500P are highly compact devices to isolate and adapt standard signals to active inputs of SPC- and DC-systems. The device is loop powered via the 4-20 mA output.
universal signal converter
24 - 240 V | M1MTN1
signal converter
MSW 82000
The power inverter MSW converts your car battery into a 230V power supply for any electrical appliance up to 2000W. The USB socket (5V) will allow you to plug in electrical appliances such as MP3 players, digital cameras ... The Modified ...
strain gauge signal conditioning card
SG75
The SG75 Strain Gauges conditioners use the signals issued from the strain gauges probe and is implemented on a 19?board. It can include up to 3 independent channels. The conditioners should normally drive full Strain Gauges bridges. ...
Partners