Road construction equipment

Working width: 72 in

Working width: 1.2 m - 3.1 m

Working width: 8 m - 10 m

Reinforced wheel rims Immersed bitumen pump Entirely self-propelled heater unit, with stainless steel chimney stack Elliptical tank with centre of gravity closer to the ground, thus ensuring good road-holding properties Capacity : 22 ...

Tools include asphalt heater and asphalt processor Repair potholes, cracks and other surface defects in roads and parking lots Recycles existing asphalt and creates seamless, long-lasting bonds Fast, eco-friendly and economical ...

Cold planer designed for milling asphalt and concrete in construction, roads and street maintenance, warehouses, road access. FEATURES Easy adapt to skid steer loaders, midiloaders, backhoe loaders, telehandlers, multipurpose ...

Working width: 2550 mm - 4900 mm

The Vertical Vibrating Bran Finisher type STVc, is utilised for the separation of residual flour and for finishing off bran and fine reduction bran. The machine has a cylindrical steel body supported by four couples of Indian canes and ...

When you choose the four-track GOMACO Commander III, you know you have the latest technology available today to achieve your goals in concrete paving. This technology improves paving accuracy and provides easier setup, troubleshooting ...

The addition of a proportion of Recycled Asphalt (RAP) to the final formula has become standard practice Road builders are seeking ever-higher recycling rates ? not just to preserve natural resources but also to optimise production costs ...

Mastic mixers have been produced by BENNINGHOVEN for more than 50 years. Mixers are designed to produce mastic asphalt as part of a mastic plant or for the transportation of hot material - hot charge - direct to site. Optimum reliability ...

Working width: 1400 mm - 2730 mm

The grit spreader makes our construction spreader portfolio complete together with the sand and binding agent spreader for roadmaking. The spreader is designed to spread evenly most of bulked materials on different subfloors. From the ...

Working width: 2 m

Working width: 2.5 m

Asphalt recycler BA 7000 F - BA 10000 F * environmentally friendly * independent * cost-saving * Wide range of application with new mixing drum system A new mixing drum system has been designed for processing ...

Manual Lead Trimmer/former

Manual Lead Trimmer/former

Working width: 2.5 mm

The alkaline texturing process is only applied with mono-crystalline wafers. With this process, not only are soiling and damage incurred during the sawing process removed, but at the same time the surface of the wafer is enlarged. The ...

The alkaline texturing process is only applied with mono-crystalline wafers. With this process, not only are soiling and damage incurred during the sawing process removed, but at the same time the surface of the wafer is enlarged. The ...

The XCMG XZJ5250GL is an asphalt distributor that can deliver optimum performance in constructing permeable layer, under-layer seal, and cohesive layer. This can also be utilized in constructing fog seals for each grade of asphalt highway. ...

The WRS Series hydraulic roller screed provides superior performance for industrial flatwork or paving applications. Its high rate of productivity, ease of teardown and reassembly will save not only time but will also reduce labor requirements ...

The range of mixers on offer from Cooper Technology have been specifically designed to satisfy mixing requirements for bituminous materials. Innovative features provide faster, improved mixing and cleansing. Mixers can be supplied with ...

The range of mixers on offer from Cooper Technology have been specifically designed to satisfy mixing requirements for bituminous materials. Innovative features provide faster, improved mixing and cleansing. Mixers can be supplied with ...

The XLZ210 pavement cold recycling machine, manufactured by XCMG, is ideally used for the onsite stabilized soil mixing functions for sub-grades and sub-bases of highways, urban roads, airports, ports and parking lots. Its Weichai WP12N ...

FOR BEAD OR SWIRL APPLICATIONS They can be used in manual applications where the compressed air necessary for piston equipment is not available. Dispensing is controlled by a trigger system on the actual applicator. WITH THE POSSIBILITYOF ...

Planing on asphalt or concrete. Overlaying road, industrial and courtyard surfaces. Maintenance of stretches of road. Restoration of damaged, bumpy or worn surfaces.

Working width: 10, 15 m

The twistip can be attached to an M 24 or M 28 truck-mounted concrete pump. Similarly to the Tunnel-PUMA, it then allows the end hose to perform axial slewing movements in order to access holes in the side of the formwork inside the tunnel.

The famous ARCEN's mixers expertise applied to the asphalt mixing; Solid quality that runs smoothly: solid steel body preciously machined, cast iron elements with generous thickness, powerful gearmotors; Batch mixers are characterized ...

The BMS Binding agent spreader is designed as a three-point attachment unit with a capacity of 3 m? and 4 m?. The rotary feeder is controlled by a remote control unit, for an easy and fast usage during the job. The remote control unit ...

Cold milling machine with oscillating milling technic for indoor and outdoor applications. The compact design, the easy manoeuvrability and low operating weight as well make it highly effective and versatile for the different floor renovation ...

Cost and time savings ? Fast mobilization speed of 27km/h(17mph) saves time and cost by eliminating the use of a trailer for hauls less than 20km(13miles). ? A single operator controls the entire machine. Efficient operation ? ...

AH-7 Automatic Infrared Asphalt Heater 7 pcs of K1100 infrared burners are installed in this machine to heat the asphalt on the pavement,roads,stadiums,etc. The system can be ignited automatically. And there is a flame detector to detect ...

Features: ? Mixer that allows the transport of conventional cement screed and other building materials. ? The filling of the mixing tank can be done from the three sides when the tank lid is open towards the trailer bar. ? To offer you ...

Attachment designed for planing small trenches, crossings or scarifying the top layer of asphalt. Ideal for mounting on skid steer loaders not fitted with high flow systems, as well as small hydrostatic drive loaders and backhoes. Independent ...

Working width: 8 m - 10 m

Working width: 3 m - 20 m

Working width: 15 m - 28 m

Working width: 3.5 m - 20 m

Working width: 3.5 m - 20 m

Asphalt Recycling, Asphalt Milling and Reclamation, Rock Road Refurbishing, County Road Remediation and Blending, Soil Stabilization ONE PASS UP. ONE PASS BACK. The IronWolf Grader Mount Profiler is designed to mount on graders and ...

For reapir of damage roads we make machines for technology of set packet by asphalt mixture - superstructure series TERMO, and also machines for repair by nozzle method - set series TURBO, which includes also car superstructures and also ...

Working width: 1750 mm - 3420 mm

Technical highlights Compact front loader in the 1-meter-class with outstanding productivity and a sophisticated vision concept. The milling drum unit comes with useful automatic features and operation of the machine is easy and intuitive. ...

The Patch Planer, engineered by JCB, features a connection to the Hi-Flow Circuit enabling the user for a precise planing performance to an utmost depth of 115mm. This machine is equipped with an easy adjustment wheel console that permits ...