Multifunction calibrators, other calibrators

Temperature: -20 ?C - 60 ?C
Noise level: 120, 50 dB
Voltage: -13 mV - 80 mV

Temperature: -10 ?C - 50 ?C
Voltage: 9 V - 20 V

Temperature: 10 ?C - 50 ?C

Temperature: 10 ?C - 260 ?C

Temperature: -18 ?C - 149 ?C

The new Yokogawa CA700 Portable Pressure Calibrator is equipped with a silicon resonant sensor that uses Yokogawa proprietary DPHARP technology. The CA700 can measure pressures with an accuracy that is within ?0.01% of rdg*, making ...

Temperature: -20 ?C - 60 ?C

Temperature: -20 ?C - 50 ?C

The 2553A provides well used K,T,E,J, and an additional 6 types of thermocouples. These 10 types are all regulated in IEC. It also provides widely used Pt100 as an RTD. Resistance as well as temperature value can be set as an output value, ...

The 2553A provides well used K,T,E,J, and an additional 6 types of thermocouples. These 10 types are all regulated in IEC. It also provides widely used Pt100 as an RTD. Resistance as well as temperature value can be set as an output value, ...

Pressure: 15000 psi

Temperature: -25 ?C - 1200 ?C

Our ASC-400 Multifunction Process Calibrator combines all your favorite features such as % error calculation, scaling, leak-testing, and switch calibrating into one multifunction process calibrator. ? Large full color display ? Advanced ...

Temperature: -100 ?C - 700 ?C

Temperature: -270 ?C - 2315 ?C
Pressure: 0 bar - 1000 bar
Voltage: 61 V

Temperature: -270 ?C - 2315 ?C
Pressure: 0 bar - 1000 bar
Voltage: 60 V

Temperature: -270 ?C - 2315 ?C
Voltage: 60 V

Temperature: -270 ?C - 2315 ?C
Pressure: 1000 bar
Voltage: 60 V

Temperature: -25 ?C - 660 ?C

The HBM BN100A bridge calibration unit excels in precision when calibrating measuring chains and equipment. The BN100A bridge calibration unit is added in the measuring system in place of the transducer, or directly connected to the ...

Calibration is fundamental to correct measurement therefore, you should place heavy demands on the calibration units of your amplifiers. The PC-controlled K148 calibration unit from HBM provides maximum safety and reliability for your ...

Voltage: 8 mV

Surface sensor calibration has never been simpler, now that SURFACAL (BNM-LNE model) has arrived. This surface temperature reference device regulates surface sensors in ways that are almost indistinguishable from the sensors for which ...

Temperature: -30 ?C - 80 ?C
Pressure: 0 bar - 100 bar
Voltage: 80 V

Temperature: -40 ?C - 150 ?C
Pressure: 0 bar - 20 bar
Voltage: 24 V

Temperature: -40 ?C - 123 ?C
Pressure: 550 mbar - 1150 mbar
Voltage: 24 V

Temperature: -40 ?C - 150 ?C
Pressure: 0 bar - 700 bar
Voltage: 6 V

Temperature: -20 ?C - 80 ?C
Pressure: 0 bar - 8000 bar
Voltage: 0 V - 10 V

Do you know what it takes to properly manage quality and performance of analytical balances? If you are a lab or QA manager who needs to implement standard operating procedures to comply with GLP/GMP/GCP/ISO but doesnt even know where ...

What with GLP and ISO standards, todays laboratories have an increasing need to find sustainable ways to verify the quality and performance of their pipettes in-house. However, many laboratory/QA managers would be at a loss as to what ...

The Process Calibrator Series HT 8000 is manufactured by HT Products. The product is created to develop and measure the DC voltage and DC current up to 10V and 24 mA. The generation of output voltage signal with amplitude is up to 10VDC ...

The EXTT Series Torque Testers provide a rapid and user friendly way to calibrate and setup lower torque handheld precision for the fastening of tools. This includes electric and air screwdrivers, pulse tools, and nut runners. As a ...

The HUMOR 20 humidity calibration with humidity calibrator by E+E is an internationally recognized instrument that calibrates humidity accurately and allows reproducible and documented results. It can measure humidity range of 10-95% ...

This is a component from humidity calibration set by E+E which are annually tested and adjusted depending upon the certain operation. The assembly is the simple solution in calibrating humidity. It comes with a calibration device which ...

Bronkhorst High-Tech has urbanized a moveable attuning system to convene the rising demands of consumers of measurement and manage apparatus contained by the ISO-9000 quality control system. The FLUICAL? moveable tuner presents immense ...

The FLUICAL? Bench-Top Calibrator has been developed by Bronkhorst High-Tech to serve the growing needs of measurement and control equipment users, in compliance with the ISO-9000 quality control system. FLUICAL? Bench-Top Calibrator ...

XR20-W is installed with a new software that enables it to calibrate the rotary positioning accuracy of an axis on the different conditions of five axis machine tools. It provides users with detailed tools to distinguish concerning the ...

Renishaw presents ML10 laser measurement system. ML10 is the gold standard in machine tool calibration, CMMs or co-ordinate measuring machines and other systems where position and motion play a key role. Combined with the high-precision ...

Noise level: 94 dB - 114 dB

Sound Intensity Calibrator Type 4297 is utilized for calibration of on-site sound-pressure and also verification of pressure-residual intensity-index. One of the most significant and idle features of this device is that you need not ...

Noise level: 94, 114 dB

Noise level: 114, 104, 94 dB

Noise level: 151 dB - 166 dB

Type 4294 allows precise measurement instrumentation at a general acceleration level of 10 ms2 (0 70 g load). Additionally, the reference signal can also serve for displacement calibration and velocity at 10 ?mm and 10 mms1. This instrument ...

In order to achieve and maintain a consistent production environment, constant process parameters are required. For Hot bar reflow soldering, Heat seal Bonding, Heat staking and ACF Laminating, the most important process parameters are ...

CALIBRATOR SP - Vital for Quality Assurance and ISO 9000 Important Features: Used for periodic verification and calibration of AC, AC-HF, DC, and Impulse Spark Testers of any model and any make. Complies with all Spark Tester standards. Test ...

The manual strain gauge calibrator is used for simulation of strain gauge sensors with bridge resistances of 120 W, 350 W or 1000 W. Other bridge resistances or the combination of up to 2 bridges in one housing are available on request. ...

The IEEE 488 strain gauge calibrator is used for simulation of strain gauge sensors with bridge resistances of 120 W, 350 W or 1000 W. Other bridge resistances or the combination of up to 2 bridges in one housing are available on request. ...

Temperature: -35 ?C - 165 ?C

Temperature: 18 ?C - 28 ?C

The Sonimix 3012 / 3022 is a device crafted to manually calibrate or by remote control up to 6 monitors installed in an air pollution monitoring station to measure gases such as SO2, HC, BTX, CO, NOx and O3. It is a multigas calibrator ...

The Multipoint Multigas Calibrator Sx 6000C1 is engineered to calibrate either manually or by remote control, up to 5 gas screens setup in the AIR contamination scanning panel like such as SO2, HC or BTX, CO, NOx and O3. With its ...

The 3590VHR from Epsilon consists of good resolution, digital electronic calibrators. The unit features a 0.8 microinches, or 20 nanometers, resolution, and is equipped with 2 inches or 50 mm of measuring range. The 3590VHR is offered ...

The Sonimix 2130 is a calibrator for nitrogen oxides (NOx) analysers developed by LNI SCHMIDLIN SA. The calibrator provides testing of NOx converter efficiency. It is equipped with a built-in ozone generator and an NO cylinder which allows ...