Medium and high voltage fuses

Designed by Mersen, these Limitor high voltage fuse-links are compliant with IEC 60282-1 and VDE 0670 TD standards. They have also been manufactured and tested to comply with the Quality Management System certification under the ISO 9001:2000 ...

Amperage: 6.3 A - 63 A
VAC: 24 kV

Amperage: 0 A - 100 A
VAC: 3000 V
VDC: 3000 V

Amperage: 3 A - 600 A
VAC: 2750 V - 38000 V

Amperage: 70 A - 700 A
VAC: 2750 V - 8250 V

Amperage: 2 A - 200 A

The H.V.H.B.C. fuses from Driescher are designed to be automatic and it is an acting medium-voltage switchgears that have a voltage range from 6 to 36 kV. The device has a very fast short circuit interruption. It protects transformers, ...

The ETI HV VV THERMO are high voltage high breaking capacity VV fuse links. The ETI HV fuse links are manufactured for the safety of units in switch gears and other machinery ( distribution transformers, capacitors and motors) from thermal ...

The ETI VV is a medium voltage fuse that observes various standards and specifications. It has a current limiting fuse by IEC 60282-1, Sixth edition 11/2005. Moreover, the device uses IEC 60644 and IEC 60549. It is the application guide ...

The switchgear ETI offers a complete range of high-voltage wires. This is valid for shortcircuits and additionally for overcurrents surpassing five times the estimation of the ostensible current (5xin). DB, S368 series wires are principle ...

Amperage: 80 A - 150 A

Amperage: 0.4 A - 520.83 A

Amperage: 0.4 A - 481 A

Amperage: 5 A - 200 A

Amperage: 5000 A - 33500 A

Amperage: 8000 A - 25000 A

CCLB Characteristics: Stud mount with tapped terminals. Isolates faulted capacitor. Size amp rating 150% to 175% of capacitor rated amps. Maximum quality assurance. CCLW Characteristics: Stud mount and pressure plate terminals. Isolates ...

Amperage: 8 A - 900 A

MEDIUM VOLTAGE FUSES AND FUSE BASES, SERIES ?FMT? FMT fuses are suitable for indoor and outdoor applications and are ideal to protect MV/LV transformers and MV motors. They are all equipped with a striker which comes out when the fuse ...

Amperage: 50 A - 315 A

H.R.C. fuses are normally used to protect small banks and/or three-phase capacitors, designed in accordance with DIN and IEC standards for protection against thermal and dynamic effects, caused by short circuit current exceeding the tolerated ...

Expulsion fuses (see figure S) are normally used to pro- tect banks with high powers usually installed outside, where there are many units in parallel. Using expulsion fuses is a practical cost-effective and functional system since, in ...

Amperage: 0.08 A - 6.3 A

Amperage: 3 A - 400 A

Features LV HRC fuse-links HV HRC fuse-links D type fuses Fuses possess some unique features not offered by other protective devices. They interrupt short-circuit currents within a few milliseconds, faster than any other protective ...

Amperage: min 6.3 A
VAC: min 7200.0 V