Magnetic reed proximity sensors

Measuring range: 0.1 m - 30 m

Current: 250 mA - 500 mA
Voltage: 30 V - 100 V

MAGNETIC PROXIMITY SENSOR with REED switch ? 1 x C Change-Over : 250VApeak - 60 VA - 1A ? Threaded plastic housing filled with 30% glass fiber

The SME-10M Proximity sensor is a device that features a a plug connection of M8, M12 / female thread M5 and a 0 to 250V DC, 230 V AC voltage. It's also equipped with a 0.3, 2.5, 5, 7.5, 0.2 to 10 m cable length and electrically functions ...

The PTI series is a magnetic reed proximity sensor, manufactured by Celduc Relaic. It is equipped with a reed switch, which has 1 normally open contact. It operates at a power rate of 100 VA, peaking at 10 W.

The CPS-C8Q5 Magnetic Switch is a device made available together with a Reed Switch and a GMR Sensor. It's manufactured with a clippard stainless steel and pneumatic cylinders that has an internal magnet. It also detects the rod piston's ...

Yaskawa's Bestact? dustproof and flood-tight proximity switches offer industry-compatible mounting capability with IP52-IP68 (~NEMA 2-6) enclosure ratings. These switches utilize Yaskawa's world-renowned Bestact? logic and inductive rated ...

Current: 0.4 A
Voltage: 60 V

Current: 0.4 A
Voltage: 60 V

A magnet switch contact consists of two flat contact blades which have been infused into a glass bulb filled with protective gas. Due to the approach of a permanent magnet the interleaved ends of the contact blades are attracted to each ...

A safety gate monitoring module, which is manufactured by Dold, is a safety device which regulates the position of mobile safety devices via interrogation of safety switches that are operated via opening and closing of a safety device.

A safety gate monitoring module, which is manufactured by Dold, is a safety device which regulates the position of mobile safety devices via interrogation of safety switches that are operated via opening and closing of a safety device.

A small, cylindrical reed sensor 25.4mm (L) x 5.80mm (Dia.) (1.00" x 0.228") with a choice of normally open, normally closed or change-over contacts. Capable of switching up to 300Vdc at 10W. Available with a range of sensitivity, cable ...

Article No MZR40128 Type of actuation Magnet Type of electric connection cable connector M12 Type of switching output PNP Length of sensor 20.5mm Diameter sensor 3.6mm Construction type housing Cylinder plain Material housing Stainless ...

The DH Series, manufactured by Univer?, is a magnetic and electronic proximity sensor designed in electromechanical with Reed bulb technology and electronic with magnetoresistive effect. In addition, the first one comes with a reed bulb ...

Magnetic switches are operated using a magnetic actuator. A reed contact installed in the housing is actuated by the magnetic field of a magnet. The switch state of the reed contact can be evaluated and further processed by a downstream ...

Magnetically operated switches are designed for resistance to water and oily environments. Connection is made through an underwater pluggable connector. Operation is by remote magnet. Water-current meter: activating magnet mounts to ...

The 1044x0 series, manufactured by Elobau, is a proximity switch that has an N.O. contact form and an IP67 protection class. It has a maximum switching voltage of 250 V, a maximum switching current of 3.0 A and a maximum switching power ...

SAFETY CODED MAGNETIC SENSOR, SR SERIES Pizzato Elettrica extends its range of safety magnetic sensors by introducing the SR A series which distinguishes itself from the SR B series in the reduced dimensions. Both series are devices ...

The 1203x0 Series of proximity switch reeds from Elobau are capable of handling up to 250 V of switching voltages and 1,0 A of switching currents. The units have an N.O contact style and a switching power cap of 20/30 W/VA. Moreover, ...

SUITABLE FOR NON-CONTACT SWITCH TYPES: Coded: SPC, SMC, SMC-H, LPC, LMC Magnetic: SPR, SMR, SMR-H, LPR, LMR RFID: LPF-RFID, SPF-RFID, LPZ-RFID The IDEM GBN-1 Gate Bolt for non contact switches provides interlocking of the ...

SUITABLE FOR NON-CONTACT SWITCH TYPES: Coded: SPC, SMC, SMC-H, LPC, LMC Magnetic: SPR, SMR, SMR-H, LPR, LMR RFID: LPF-RFID, SPF-RFID, LPZ-RFID The IDEM GBN-1 Gate Bolt for non contact switches provides interlocking of the ...

Safety switch with integrated solenoid for process protection (without guard locking monitoring) Integrated CES-AY electronics A special evaluation unit is not required Safety category 4 and PL e according to EN ISO ...

SUITABLE FOR NON-CONTACT SWITCH TYPES: Coded: SPC, SMC, SMC-H, LPC, LMC Magnetic: SPR, SMR, SMR-H, LPR, LMR RFID: LPF-RFID, SPF-RFID, RAMZSense The IDEM GBN-3 Gate Bolt for non contact switches provides interlocking of the ...

SUITABLE FOR NON-CONTACT SWITCH TYPES: Coded: SPC, SMC, SMC-H, LPC, LMC Magnetic: SPR, SMR, SMR-H, LPR, LMR RFID: LPF-RFID, SPF-RFID, RAMZSense The IDEM GBN-3 Gate Bolt for non contact switches provides interlocking of the ...

This extremely compact switch has CODED MAGNETIC Actuation and a SWITCHING TOLERANCE of up to 10mm. The MMC-H is specified to 105C but has been designed to work up to 125C. PLe/Cat4 ISO13849-1 can be achieved as the MMC-H will operate ...

Maximum safety with Category 4/PLe Minimal wiring effort Small space requirement No additional DIN rail mounted evaluation unit required For tight situations the new field evaluation unit CES-FD-AP The new product CES-FD-AP from EUCHNER ...

MAGNETIC ACTUATION. SWITCHING TOLERANCE UP TO 10mm. Specified to 105C but designed to work up to 125C. Will operate with most Safety Relays. A cost effective and compact yet particularly robust fitting suitable for all small guard ...

The read head is fastened to the fixed part of the safety guard and is connected to the evaluation unit via a two-core screened cable. The actuator fastened to the safety guard is moved towards the read head by closing the door. When ...

The cylindrical RPC has CODED MAGNETIC Actuation, where the threaded body permits easy installation. It is designed with a high switching tolerance that is up to 10mm. The RPC has the capacity of 80C, but is designed to work up to 100C. ...

The read head is fastened to the fixed part of the safety guard and is connected to the evaluation unit via a two-core screened cable. The actuator fastened to the safety guard is moved towards the read head by closing the door. When ...

SUITABLE FOR NON-CONTACT SWITCH TYPES: Coded: SPC, SMC, SMC-H, LPC, LMC Magnetic: SPR, SMR, SMR-H, LPR, LMR RFID: LPF-RFID, SPF-RFID, LPZ-RFID The IDEM GBN-1 Gate Bolt for non contact switches provides interlocking of the ...

The read head is fastened to the fixed part of the safety guard and is connected to the evaluation unit via a two-core screened cable. The actuator fastened to the safety guard is moved towards the read head by closing the door. When ...

The NZ.VZ.VS is a magnetic safety switches manufactured by EUCHNER GmbH. They are built with a magnetic guard locking function which has two locking options: mechanical release by applying voltage and electrically locking by applying ...

This extremely compact switch has CODED MAGNETIC Actuation and a SWITCHING TOLERANCE of up to 10mm. The MMC-H is specified to 105C but has been designed to work up to 125C. PLe/Cat4 ISO13849-1 can be achieved as the MMC-H will operate ...

MAGNETIC ACTUATION. SWITCHING TOLERANCE UP TO 10mm. Specified to 105C but designed to work up to 125C. Will operate with most Safety Relays. A cost effective and compact yet particularly robust fitting suitable for all small guard ...

Measuring range: 18 mm - 23 mm

Description Magnetic switch is an electrical switch that switches when a magnetic field affects it. They are useful in situations where moving elements cannot make direct contact with the switch. Characteristics: 1.Material: metal 2.Size: ...

Boster is a safety switch designed for application on extreme conditions. This switch has a consistent 4KG magnetic holding force and has been classified with PLe Cat. 3 for high safety and performance level. It does not require any extra ...

These are made of a reed switch with contacts protected by a glass bulb which contains inert glasses, this way mechanical and electrical deterioration are kept at minimum level. This is all contained in a plastic or metallic housing filled ...

These are made of a reed switch with contacts protected by a glass bulb which contains inert glasses, this way mechanical and electrical deterioration are kept at minimum level. This is all contained in a plastic or metallic housing filled ...

The FURTIF 2SSR24BX/2SSR24V is a non-contact and coded safety switch designed with a high switching ability. It is coded with ACOTOM? and features a LED quality display of the accurate code identification. This safety switch has a closing ...

The MK 17 is a magnetic and it is smoothly used with the other sensors. The sensors are supplied with the taped and reeled and it is perfect and suitable for auto placement.The special dimension and features are used to make it powerful. ...

The MK26 is the range of sensors that are operated magnetically and created for screw mounting. The sensor must be mounted on a fixed surface with the actuating magnet on the moving surface. The high power switches, other cables, ...

The FURTIF AMX is a non-contact coded safety switch. It is equipped with a self-control ACOTOM?3 system, and an LED status display of the correct code recognition. The device is capable of performing in a PLe Cat .3 level, and can ...

The MK 27 functions through mounting it to the fixed surface. The unit is integrated with a M27 magnet, placed on the moving surface. The device also features a cable connection in metal protective tube. It offers four operate sensitivities, ...