Accelerometers, acceleration sensors, shock sensors

Sensor and evaluation in one housing ? also with ATEX approval Robust speed sensors Robust M30 metal housing, no additional impact protection housing required Ideal in combination with a PLC Flush installation Flexible voltage ...

Compact vibration monitoring of two measurement points Offers more than ISO monitoring VNA001 for vibration monitoring of an external measurement point, alternatively 4...20 mA current signal, e.g. temperature Two vibration values ...

Frequency: 15000 Hz

The iFm structural monitoring system that specializes for structural vibrations with low acceleration features a vibration sensor with a high resolution. The product exhibits a low noise of 3.3g, a saturation free action in a possibility ...

The IFM VTV122 Vibration Transmitter is designed for continuous vibration monitoring of machinery and equipment in accordance to ISO 10816 standards. It senses the true rms velocity measurements of non-rotating component surfaces, with ...

Acceleration range: 20 m/s?
Frequency: 0 Hz - 100 Hz

WGS2 Velocity sensor Position and Velocity sensor discontinued model / only for replacement ? Measuring ranges: up to 2500mm ? Velocity: 0.01 mm/s - 10 m/s ? Potentiometer, 10V, 4..20mA, tacho, T5

Frequency: 3 Hz - 20 Hz

The speed and direction sensors by Honeywell respond to the interruption or presence of a magnetic through production of an output which is proportional to the strength of the magnetic field. With the housing material as plastic or aluminium ...

Honeywell features VRS sensors in various categories such as high resolution, output and temperature, power output, harsh setting applications, non-expensive molded versions and major purposes. Operating with Variable Reluctance Sensing ...

Manufactured by Honeywell, the 6-D Motion Variant 6DF has been designed to deliver positioning, motion, as well as navigational detecting operations. Inertial measurement unit sensors are created to provide position, motion and navigational ...

Acceleration range: 490 m/s?
Frequency: 2 kHz - 5 kHz

The HBM FiberSensing FS65 Single Axis Accelerometer is a Fiber Bragg Grating (FBG) based sensor, suitable for a large range of applications where low frequency and small amplitude vibrations are present. The HBM FiberSensing optical ...

The SIEMENS Milltronics TASS is a rugged speed sensor with a rugged, IP65 rated design meant for easy and low cost installation and can be installed to any Milltronics belt scale integrator. It is mainly used on mobile crusher application ...

The Milltronics RBSS series, manufactured by Siemens?, is utilized for monitoring the conveying belt speeds along with a transmitted single output through the connected cable from the integrator. It has an easy installation of a belt ...

The SITRANS WS100 is a compact speed sensor that is suited for aggregate and mineral processing industries. It is a pulley shaft-driven that monitors and detects speed using a magnetic mounting. The shaft rotation is converted into a ...

The HBM FiberSensing FS65 Single Axis Accelerometer is a Fiber Bragg Grating (FBG) based sensor, suitable for a large range of applications where low frequency and small amplitude vibrations are present. The HBM FiberSensing optical ...

Frequency: 0.1 Hz - 20 Hz

Frequency: 0.1 Hz - 20 Hz

The G-sensor manufactured by Gimatic is a shock detention sensor designed to avoid component failures. It monitors the correct working of various kinds of actuators by checking its level of vibration. When the value of the vibration exceeds ...

The FAG SmartCheck vibration sensors can work on many machines. These vibrators are easy to use and flexible enough to meet all sorts of special demands. This is useful for detecting rolling bearing damages and mis-alignments on many ...

Frequency: 19 kHz

Frequency: 19 kHz

Acceleration range: 4903 m/s?
Frequency: 0.1 Hz - 12000 Hz

Acceleration range: 4903 m/s?
Frequency: 0.1 Hz - 12000 Hz

Acceleration range: 29420 m/s?
Frequency: 1 Hz - 8000 Hz

Acceleration range: 29420 m/s?
Frequency: 1 Hz - 8000 Hz

Acceleration range: 19613 m/s?
Frequency: 0.1 Hz - 4800 Hz

Acceleration range: 19613 m/s?
Frequency: 0.1 Hz - 4800 Hz

Acceleration range: 49033 m/s?
Frequency: 1 Hz - 26000 Hz

Acceleration range: 49033 m/s?
Frequency: 1 Hz - 26000 Hz

Features M12 connector option Hermetic design Ground isolated ESD protection Reverse wiring protection Mounts in any orientation Choice of M8 or 1/4-28 captive bolt mounting Corrosion resistant

Acceleration range: 490 m/s?
Frequency: 1 Hz - 12 Hz

Features Senses both acceleration and temperature Rugged design Hermetic seal Ground isolated ESD protection Miswiring protection

- Detection through direct contact during ejection or free fall - For screws, studs, punched parts, springs and non-metallic parts - Adjustable suppression of multiple impulses - Up to 100 parts per second - Long life ...

Frequency: 1.83 Hz - 2500 Hz

Acceleration range: 78 m/s? - 147 m/s?
Frequency: 400 Hz

The main ide behind the designing of the RS1 Needle contact sensor is measuring of structure-bone ultrasounds in the industrial environments. It is the generic purpose sensor for monitoring the machines. It allows to take measurements ...

Frequency: 1.83 Hz - 2500 Hz
Revolutions per minute: 0 rpm - 2000 rpm

Frequency: 0 kHz - 20 kHz

The SDT270 Magnetic Sensor is manufactured by SDT, and is a structure-borne ultra-sonic sensor generally designed with a powerful built-in magnet. Furthermore, this sensor, capable of being easily affixed on metal panels/pipers, features ...

The SDT270 Acceleration Interface is ideally designed with a good quality functionality and performance intended to be used for specific purposes. The system is capable of measuring, alarming and performing vibration data analysis in ...

Revolutions per minute: 200 rpm - 400000 rpm

Revolutions per minute: 8000 rpm

The ENDEVCO 28959F-FV series portable calibrators are specially made for precision calibration of different accelerometers, often used by test engineers and technicians in on-field applications for measurements and adjustment. These calibrators ...

Acceleration range: 6865, 27459, 13729 m/s?
Frequency: 1.5 Hz - 40 Hz

Acceleration range: 6865, 27459, 13729 m/s?
Frequency: 1.5 Hz - 40 Hz

Acceleration range: 49 m/s? - 4903 m/s?
Frequency: 1 Hz - 35 Hz

Acceleration range: 4903 m/s?
Frequency: 1 Hz - 45000 Hz

Acceleration range: 4903 m/s?
Frequency: 1 Hz - 45000 Hz

Acceleration range: 49 m/s? - 4903 m/s?
Frequency: 1 kHz - 35 kHz

Acceleration range: 49 m/s? - 4903 m/s?
Frequency: 1 kHz - 35 kHz

Revolutions per minute: 1 rpm - 500000 rpm

Revolutions per minute: 1 rpm - 99999 rpm

Revolutions per minute: 1 rpm - 250000 rpm

Revolutions per minute: 20 rpm - 10000 rpm