Inductors, coils

Current: 10 A - 20 A
Voltage: 540 V - 760 V

Current: 0 A
Voltage: 0 V

Current: 0.3 A - 10 A
Voltage: 0 V - 250 V

Current: 0.5 A - 7 A
Voltage: 0 V - 600 V

Current: 0.5 A - 7 A
Voltage: 0 V - 600 V

Voltage: 24 V

Current: 0 A - 3000 A

Current: 5000 A
Voltage: 36 kV

Schaffner load reactors work on the AC output side of frequency converters or other sensitive equipment in series to the electrical consumer. Load reactors, also known as output reactors or dv/dt reactors, essentially protect the load, ...

Current: 0.3 A - 5 A
Voltage: 250 V

Current: 16 A - 50 A
Voltage: 600 V

This demagnetizing coil is manufactured by Eriez Magnetics Europe Limited. It is designed for demagnetizing natural magnetite materials in slurry flowing through vertical pipelines or dry gravity flow. There are available 17 sizes, without ...

Current: 50 A - 250 A

Since comprehensive, odd-shaped components and non-standard heating requirements make traditional copper induction utilization challenging, Ambrell has designed and manufactured the Easycoil systems. These apparatuses are part of the ...

The Induction Heater features an induction coil designed for increasing the temperature of the components in the aircraft turbines. It provides a quick and efficient heating up processes for assembling.

These Flexible induction coils from Leifert induction is designed it accommodate difficult heating positions in a reasonable setup time. It is an ideal device for prototype experiments. and are adequate for heating weld seams. For more ...

In order to make the induction coil cover the work piece, the work piece must be taken into the induction coil. An induction coil that takes advantage of the inner field, can offer better efficiency to the outer field induction coil.

This is a Custom made induction coil manufactured by Leifert Induction GmbH which is designed for heating up big and large bearings. The unit can be customized in order to meet certain customer specification which can produce much higher ...

Current: 0 A - 0.33 A

The SMT inductor series, manufactured by TE is a high frequency device that is specially designed with a lead type material to ensure highly durable performance when in use. These inductors are available in a wide range of sizes and ...

The molded wirewound inductors manufactured by TE, are specially designed with a wave solder that is capable of functioning up to 260?C. A wide variety of models with different inductances, DC resistances and currents are available ...

The unit is manufactured by TE Connectivity which is a broad selection of versatile, radio frequency inductors that has a wide variety of lead type that is available from axial or radial. The unit has an inductance of 4.7 ?H up to 1000 ...

SKS-DCL-0360-CL/4 DC Reactor DC line reactors also realize the two way benefit of line reactors. Line voltage distortion and notching caused by the servo motor is filtered from the incoming AC line supply and conversely interference ...

Current: 5 A - 1600 A
Voltage: 380, 1140, 690 V

Brand:Sikes Model:SKS-FZ-100-AL/3.3 Rated Voltage:3.3KV Rated Current:100A Designed Power: 565KW Insulation: F Connection?DC line Operation Model: Continuous Application:Electric motor simulation load Certification : CE Insulation ...

OCL series connection line reactor/ chokes are placed in series with electrical equipment to introduce a specific controlled impedance to the AC circuit. This series are applied at AC drive output side to suppress inrush voltage, reducing ...

Magnetic network chokes also realize the two way benefit of line chokes. Line voltage distortion and notching caused by the drive is filtered from the incoming AC line supply and conversely interference imposed on the line by other devices ...

Petersen coils regulated by steps (with off voltage tap changer) Single phase reactors with or without magnetic core, connected between a neutral point and ground in MV distribution network. They are designed to be resonant with network ...

Current limiting reactors They are series reactors that reduce the short circuit currents in the power system. The advantage of their use is that the circuit breakers in the network systems with lower circuit breaking capacity are ...

Reactor connected between the neutral of a power system and ground to compensate (resonant) the capacitive earth fault current. They are designed to be tuned with network capacitance, limiting earth fault current. In this case change ...

Current: 0.4 A - 1.8 A

Current: 0.41 A - 0.61 A

Current: 0.47, 0.5 A

Current: 0.04 A - 3.9 A

Current: 0.45, 0.25 A

This MTM Power ST Series is a one phase power and commutation choke. Once of the uses of the power choke its to load and make sure of the often required short circuit voltage with a percentage of 4 to the mains. Next would be the damping ...

The three phase reactors for frequency converters are specially designed for 3x400V/230V, 50Hz power system. The reactors are manufactured as per IP00 protection degree, class F insulation for 40?C ambient temperature and EN 61 558-2-20 ...

3-axis Helmholtz coils provide an easy and non-destructive way to control the quality of permanent magnets. The Helmholtz coils can be single-axis or 3-axis. The triple-axis version lets you see the direction of the magnetization with ...

Applications: loudspeakers single magnets of any shape diametral 2-pole assembly stepper motors lifters automotive items household appliances

Applications: Wind generator rotors Servomotor rotors BLDC rotors IPMSM SPMSM

The HA radial multipolar fixture is a non magnetic core, with the same number of slots as the poles number to be magnetized. Series or parallel conductors are displayed inside these slots. All is embedded in the epoxy resin and encased ...

Applications: PM inductors rotors, SPMSM, IPMSM, BLDC, PMaSRM. claw poles motors wind generators, gearless wind turbines servomotors - micromotors fly-wheels (automotive, cyclette, motocycle) housings MAINLY USED FOR wide pulse ...

Current: 10 A - 200 A

The CITEL 75 Vdc Surge Protector are available with 1-pole and 2-pole with remote signaling. It has a discharge current capability of 20kA equivalent to In and 40kA equivalent ti Imax. This product are created to control the operation ...

Current: 0.4 A - 4 A
Voltage: 250 V