Fuse holders

Intrinsic safety barriers are the core of Pepperl+Fuchs' product portfolio. We offer the widest selection of products for protection of electrical signals located in hazardous areas. These intrinsic safety modules combine the energy limiting ...

Compact limit value switch with 2 configurable limiting values and 4 ... 20 mA output Suitable for 2-, 3-wire transmitters, 2-wire HART transmitters and mA sources Intrinsically safe input [Ex ia] IIC Open circuit ...

For binary signal and control circuits Intrinsically safe inputs or outputs [Ex ia] IIC Galvanic isolation between inputs and outputs For use up to SIL 2 (IEC 61508)

Stahl 9160 series are high performance transmitter supply units , up to SIL 2 (IEC 61508. The features intrinsically safe input and galvanic isolation between input, output and power supply [Ex ia] IIC. The 9160 is equipped with open ...

The mA - Isolating Repeater Series 9164 is ideal for integrating 2 wire I/O cards with 4-wire transmitters. Through this product, it is possible to interconnect active 2-wire inputs and mA sources. 4-wire transmitters can be connected ...

The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications:Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to ...

The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications:Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to ...

The active barrier RN221N supplies e.g. a transmitter with power, if required also in the Ex-area, and then transmits the galvanically isolated signal. With the optionally available HART? monitoring the status of the transmitter is monitored. ...

The DuraPure insulator from CorosTek is a favorite choice for a wide range of applications in the environmentally regulated industries like coal-fired and oil-fired plants, rock products processing plants, salt, cake and wood waste boilers. ...

One of Mersen's leading-edge and state-of-the-art fuse holders is the Modulostar?. Under the IEC standards to an IP20 grade of protection, modular fuse holders are finger-safe with fuse changing (with the flick of a finger). They are ...

FSO Fuseholder is mountable on 35 mm DIN-Rail easily installed and removed used for combiner boxes in Photovoltaic systems with fuses up to 100 kA Interrupting Rating aligned with UL 4248-1 and CSA C22.2 no. 39 as well as approvals of ...

The FQE fuse holder is tailored and produced by Schurter Electronics Pvt. Ltd. Comes in black and red caps variation. These fuse holders are shock-safe and maintains the highest value of safety. The solder terminals measure 5x20 mm. ...

FBS2 is a GS Fuseholder under the Shocksafe category PC3 that can be a Captive Fuse-Carrier, Slotted or Fingergrip which comply the standards of EC 60127-6, UL 4248-1 / UL 512, CSA C22.2 no. 39 and approval of VDE Certificate Number 135561, ...

650, 780, 850, 980 nm center wavelengths High Verdet constant Low absorption coefficients A Faraday Optical Isolator is essentially a magneto-optic device working like a uni-directional light valve. Use it to protect a laser source from ...

The Fiber Optic Isolators which have been designed by Newport are passive, fiber pigtailed devices. They reduce back reflections and backscattering of light, and are particularly desirable in laser applications. There are three models ...

Fuse holder for strip fuses to DIN 43560 Fuse holders for strip fuses to DIN 43560 are designed for use in battery powered vehicles covering voltages up to 80 V. Fuse ratings may range from 50 A to 425 A. We offer fuse holders admitting ...

This is a fuse base manufactured by Socomec which offers a fixed, unipolar and multipolar support for knife edge fuses. For this specific model, it has a high breaking capacity of 100 kA rms which enables it to be protected from overloads ...

The PV Fuse Bases by SOCOMEC offers a single polar, fixed and multi-polar aid specifically for knife edge fuses in PV applications.

Pasternack RF isolators are used for protection of radio-frequency components from signal reflection and excessive current. They are passive 2-port devices that use microwaves. These coaxial RF isolators work as a one-way trap to cut ...

1-, 2- und 4-channel versions Compact housing for snap-on rail mounting - 1 and 2 channels: 12.5 mm width - 4 channels: 22.5 mm width Convenient plug-in terminals Galvanic isolation across input and output ...

Modular case, extremely compact design Pluggable screw-clamp terminals Input 0(4)?20 mA, 0?10 V Output 0(4)?20 mA, 0?10 V Calibrated signal switch-over, easy selection High accuracy Reliable isolation ...

Width: 150, 450, 300 mm
Height: 600, 450, 300 mm
Depth: 132, 210 mm

Width: 600, 300 mm
Height: 300 mm
Depth: 210 mm

Width: 220, 320 mm
Height: 640, 320 mm
Depth: 179 mm

Compact high-voltage isolation amplifiers with safe galvanic isolation, VariPower broad-range power supply and genuine calibrated range selection. Working voltages up to 1000 V AC/DC and test voltages up to 5.4 kV AC, maximum performance ...

The VariTrans P 42000 isolation amplifiers have been specially conceived for measuring high voltages up to 3600 V (DC). They reliably isolate high potentials at the input circuit. The isolating distances are designed to withstand permanent ...

The VariTrans P 41000 TRMS isolation amplifiers have been specially conceived for measurements of bipolar voltages ranging from millivolts to volts. They reliably isolate high potentials at the input circuit. Thanks to the true rms conversion ...

This device is designed to isolate 4/20mA signals between the safe and the hazardous areas. Input:Current (4/20mA) Output: Current (4/20mA) Supply: No power supply required Model: 1, 2 or 4 channels Setting: Adjustment potentiometer ...

Advanced Contact Technology offers voltage measurement and protects your electrical equipment when there is a high energy/low voltage system. The user can equip the adapter with an effective, low voltage fuse that will isolate the ...

Littelfuse presents a range of diode battery isolators. Model 48051 is battery isolator for ambulances with voltage rating of 12V DC at 75A. Model 48070 has voltage rating of 12-36V DC at 70A maximum. Model 48090 has voltage rating ...

The Littelfuse? (01550900M - 01550900M Series) SMF Omni-Blok? Fuse-holder functions as an accessible alternative to the Nano2? SMF surface mount fuses. The product can be attached with a fuse block and a pre-installed fuse on the PC Board ...

Indication is offered on all versions except the 200A-600A. The DIN Rail can be released for all blade style fuses which are non blade. You don't require two hands to release from DIN Rain and can be done single handed. (lock open lock ...

The Class H and R are the latest fuse blocks series by Littelfuse. Compared to past versions, this generation is more advantageous in terms of it features and benefits. Class H and Class R has the same dimensions, but Class R rejects ...

The Littelfuse Class H is a block that comes with various advantages over the devices in the previous generations, as well as plenty of features and benefits. Both Class R and H fuse blocks are the same in dimension, with class R blocks ...

Port Isolator Use the SEL-2910 Port Isolator to protect the EIA-232 ports of data terminal or data communications equipment from the effects of induced voltages. Increase data reliability by breaking the path for ground loops. If long ...

ZJ-BENY PV DC BR-30 Fuse Holder was designed and manufactured , complying with the standard IEC60947-3. The Rated Current up to 30A,rated voltage up to 1000V DC. It applied for PV DC combiner box, inverter etc, with the main function ...

Screw Cap, Screw In Fully inaccessible as defined in BS EN 60127-6. Panel cut out: 12.7?, 12.0A/F Nylon 66 Body Panel Mounting CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If ...