Flow switches

Series SCS 440 - Flow controller DC 24 V Robust stainless steel housing Plug-in installation Easy configuration of the switching points Can be used universally with an adapter

The STD 1 is used in displaying and processing the signals of the flow meters SGF and SGFE from Stauff. The STD 2 is a programmable flow rate or volume display unit that has switching outputs. It is used in displaying and processing ...

The 2-Color Display Digital Flow Switch PFM is made with the most sophisticated materials to suit any industrial requirement that demands for its operation. It has a solid and lightweight construction that proves its space saving feature. ...

The FM200 Flow Monitor is very effective in monitoring FLOW/NO FLOW conditions in pipes, chutes spouting , etc. Its piezo sensor sensing technology makes the FM200 versatile for most granular FLOW/NO FLOW application. The following are ...

COMECOs PSF100 flow switch is designed to operate with low-viscosity, non-viscous, clean or dirty liquids with moderate flow rates as water and water solutions, oil, and fuels. This model utilizes the well-know principle of thermal dispersion, ...

The SC 440 series is available in an all stainless steel design and have been proven for more than 20 years in industrial applications. They are characterized by their small size and ruggedness and are available in a threaded and a plug-in ...

The DVK Series manufactured by M-ZERT is a Calorimetric flow meter, monitor and totalizer model. This device is used for measuring and monitoring the small and average flows from airs in hoses and piping. It is characterized as a maintenance-free ...

This tool is high recommended as a general relaying device when the water stoppage or the water volume reduction occurs during the use of a cooling water system and others. The piping sizes ranges from 3/4B to 6B which is well protected ...

Body: ?-Rings: Sprinq: Seal: cyl. Threads: Working temperature: Working pressure: CW614N nickel-plated NBR AISI 302 P 6 ?IN EN ISO 228 -10?C up to +70?C max. 15 bar

The flow monitors and indicators type DUG operate on the float measuring principle. wide measuring range sturdy construction installation in any orientation high switch accuracy

These rugged inline flow switches use 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The one-piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications ...

Model 530 air flow switch is composed of a rugged die cast body, stainless steel vane and SPDT snap switch to deliver excellent sensitivity and reliability all at an economic price. The unit offers easy mounting with only two screws. ...

Visualize Compressed Air and Nitrogen Gas (N2) Consumption in order to Identify and Eliminate Waste!

It is used for monitoring of low flow of liquids. The piston is equipped with a magnet that is moved by the fluid flow. Switching point on the sensor is adjustable according to the size of the desired flow. The sensor is closed when the ...

Compact models DC ? PNP output Series SN 450 - Flow controller DC 24 V G1/2 thread

The FS-480 large-body inline flow switch delivers ample flow rates with minimal pressure drop. 25% larger than its FS-380 sibling, the FS-480 is ideal for processes that push more fluid through their systems and demand low pressure drops. ...

Adjustable air - flow switch from AVFS can replace instruments that are from Dwyer. This is a kind of switch that is designed specifically for monitoring the ducts that are meant for air flow and also can provide output of 3A for indicating ...

The Bulletin 839E Solid-State Flow Switches are top of the line units designed by Rockwell Automation. It features the capacity to measure both flow and temperature by utilizing two different probe insertion lengths. The 839E monitor ...

FilterSense liquid mist monitors are for detection and continuous monitoring of flowing, fine liquid droplets in pipes, ducts, stacks and small tubing. Applications include carryover detection with mist eliminators, process control for ...

This series of precision-calibrated switches provide reliable and consistent performance; repeatability is within 1%. FS-925E units are factory preset for actuation at specified flow rates. These switches provide accurate detection of ...

Measuring only 25 mm x 70 mm (1" x 2-3/4"), these compact switches are ideal for use where space is at a premium. Designed for use with water and oil, these switches are suitable for high volume OEM applications. They are ideal for coolant ...

The s6065-ge51 flow switches specially designed with IP65 class protection are used in HVAC applications to monitor the flow rates in pipes and ducts. The SPDT switch function with 250Vac capacity , (8)15 A also monitors flow in water, ...

QVE1900 flow switch is suitable in HVAC plants' fluid flow monitoring in hydraulic systems especially in heat pump, heating plants and refrigeration like heat exchangers, condensers and boilers. It features IP65 protection, 15 A / AC ...

The HIT-2A indicators from Hoffer flow electronic are engineered with 5 rate digits and 8 total digits. These units are made as DC, AC, loop, or battery powered units. Moreover, they can accept magnetic pickups, DC pulses, or switch closure ...

The Concert? Series Flow Controllers when used with the Nordson TruFlow? devices, meters, applicators and dividers allows real-time flow monitoring and control. The flow controllers diversified management capacity helps manufacturers ...

Thermatel? TG1/TG2 provides a two-wire, intrinsically safe circuit between the probe and remote din rail enclosure. The flow/level/interface switches provide a new level of performance and reliability not found in previous switches. Continuous ...

The FTL93S is manufactured by Fluid Components International LLC. It is an insertion type flow switch, that can be used in a wide variety of applications including pump protection, safety spray nozzle monitoring, cooling water/heat exchanges, ...

The FQS Flow Switch is widely used for liquid lines like as water, ethylene glycol or any non-corrosive fluids. This device is usually seen in in chillers, pumps, condensers, boilers and other industrial devices in production areas. ...

Flow detection by means of paddle system, for liquids. Easy installation and available for horizontal and vertical pipes with upwards flow. Without contact between the fluid and the reed detection system. Application areas Suitable for ...

Fitted with either an AC or Dc switch to control pump motors, valves or to active alarm signals, Easiflow is an innovative device that delivers excellent and reliable results in measuring flow. Part of a range of hydraulic system flowmeter ...

The HFS 2100 by HYDAC, created as flow rate switches. It test the viscosity of liquid in processing plants including cooling systems, lubrication circuits, hydraulic systems and many more. It is designed and develop based on buoyancy ...

Process temperature: -40 ?C - 343 ?C

Flow detection by means of paddle system, for liquids. Easy installation and available for horizontal and vertical pipes with upwards flow. Without contact between the fluid and the reed detection system. Application areas Suitable for ...

The Calorimetrie Flow Meter, Monitor, Totalizer Model DVK measures and monitors small and average flows of air in piping and hoses. It employs the Calorimetric principle as the method of measurement. The flow velocity of the gas is calculated ...

B2800 Flow Monitor The B2800 flow monitor is an advanced microprocessor-based monitor that is also low cost and simple to operate. When ordered with a Blancett turbine meter, the B2800 monitor is configured at the factory for units of ...

The Calorimetrie Flow Meter, Monitor, Totalizer Model DVK measures and monitors small and average flows of air in piping and hoses. It employs the Calorimetric principle as the method of measurement. The flow velocity of the gas is calculated ...

Switches on a flow/no flow condition in both gases and liquids. Flow Switch range of 0.01 to 5 sfps (.003 to 1.524 smps) in liquids and 0.1 to 500 sfps (.03 to 152.4 smps) gases. Response Time of 0.5 to 10 seconds (media dependent) Wide ...

MLG-CCB311-02-200The CCB311 flow switch is designed to detect low flows in horizontal or vertical pipes with an upward flow direction. Suitable for liquids for gases, the CCB311 flow switch is very robust with high repeatability and a ...

The KAL-D Model of Thermal flow switch, manufactured by Kobold Intstrumentation, is specifically designed for liquids to relentlessly monitor the flowing media. It mainly used for applications wherein flow currents with low pressure loss ...

contactCharacteristicsMechanical flow indicator, which provides a quantitative flow display for fluid media.

The SF1K/RL is manufactured by Riels Instruments, and is a liquid flow switch with flow control of aggressive media, water, and normal media that depends on the model. It has an alarm signal of flow shortage, and is available in brass ...

Brooks flow switches are rugged, robust and reliable for usage in harsh and hazardous environments. Flow switches are designed to detect various flow rates in industrial process lines and activate an alarm or pump. The CCB311 flow switch ...

PF3W Digital flow switches. PF3W Digital flow switches for water and neutral liquids. Flow rates up to 100 l/min The digital flow switch PF3W is a vortex flowmeter, suitable for water, demineralized water, ethylene glycol and neutral ...

Very short response time ? High overload protection ? Metering range 1:80 ? Low pressure loss ? Compact design A thin elastic diaphragm made of stainless steel, which covers the entire flow cross-section, is deflected by the flowing fluid, ...

Features Rugged high grade Noryl Minimum pressure drop Operates from a small head of water Vertical mount +/15 Suitable for water and air flow switching Comments 3/4" BSP male and female threads Suitable ...

PFMB Digital flow switch with color display. PFMB Digital flow switch with color display for air and nitrogen. Flow rate up to 1,000 l/min The flow sensors PFMB series are designed to measure the flow of fluids such as air and N2. Their ...

Can be used from nominal width DN 25..200 ? Suitable for media with ferritic particles Characteristics The devices function via the principle of a paddle supported by a metal bellows, and the triggering of a micro switch.

PF2A Digital flow switch with display. PF2A Digital flow switch. For air, nitrogen, argon and neutral gases. Flow rates up to 12000 l/min Detection of digital flow switch for air. A heated thermistor is placed in the passage. The fluid ...

Adjusted switching value ?Highly reproducible ?Insensitive to dirt Characteristics The volume flow raises a piston (fitted with a magnet) out from a valve seat against a spring force. The piston actuates a hermetically separated reed switch.

PFM Digital flow switch with display. Dry air, nitrogen, argon, carbon dioxide. PFM Digital flow switch with display. Dry air, nitrogen, argon, carbon dioxide. Up to 100lt/min The flowswitches PFM series are designed to measure the flow ...

Highly reproducible ?Precise, stepless adjustment of the switching value ?Insensitive to dirt ?Short installation length CharacteristicsThe volume flow raises a piston (fitted with a magnet) out from a valve seat against a spring force. ...

The vane relay WFR/N measures air flows in ducts, in supply and exhaust air devices of fans or electric heating registers. The wind vane relay is factory set to the minimum switching points. By turning to the right of the inner screw ...

PFMV Flow switch PFMV Flow switch. Suitable for gaseous media. Flow rates up to 3 l/min PFMV is a flow switch/pressure switch for air and vacuum circuits. Features Accordance with the Compliance RoHS Extremely compact dimensions ...

The Adjustable Electric Flow Switch provides a good quality performance and functionality to be able to meet the standards and need of the users and operators. The vacuum switch is integrated with a DIN 43650 PG09 IP65 and a flow rating ...

1 in. (25mm) Description: Series FS10-C Paddle-Type Flow Switches are used in commercial and industrial applications to accurately monitor the flow of liquid in pipelines servicing water systems, heating systems, air conditioning and ...

Piston sensing element ? Liquid media application only ? Hermetic separation between flow and switch head ? Bronze or St. steel body ? Process connections from 1/4? to 3? Gas-F ? Setting ranges from 1 to 600 l/min. (H2O) ? Large-scale ...

Application Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic ...

Piston sensing element ? Vertical or horizontal mounting ? Liquid and gas media application ? Nickel plated brass, St. Steel or PVC body ? Process connections from 1/4? to 1.1/4? Gas-F ? Fixed set point from 0,3 to 20 l/min. (H2O) ? N.O. ...

IF2E ? Low-cost Adjustable Flow Switches TECHNICAL DATA Flow rate 0,3?60 LPM H2O Materials Nickel-plated brass Sealing: NBr Max pressure 50 bar Operating temperature -10?C +80?C Intervention differential ca. 45% Electrical ...

Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available ...