FEM microscopes, X-ray microscopes, Electron microscopes

Model 9900RM Gas Analyzer The new Model 9900RM is a single or multi-component gas analyzer that can be used alone or as an integrated part of a CEM (continuous emissions monitoring) system. The analyzer is 19? rack-mountable and supports ...

SICK offers the MERCEM300Z mercury measuring system that controls Hg emissions in flue gases with extreme reliability through the smallest range of measurement (0-10 g/m). MERCEM300Z is ideal for application in hostile industrial settings ...

Next-generation optical microscope with a large depth-of-field and advanced measurement capabilities for inspection and failure analysis.

The HS82 hot-stage system comes with HS 1 control unit and HS82 microscope hot-stage. The system is designed to control the temperature of slide samples in small spaces, by way of a cooling fan on the measurement cell. A standard xy table ...

Smart_VideoMicroscope allows enlargements from 50 to 100 times and uses a simple PC to view, store and analyze images. Due to its high precision special telecentric optic system and integrated digital color camera, it allows to get high ...

MZS0655?MZS0870 series zoom stereo microscopes have biggish zoom ratio, magnification from low to high non-flash in focusing course, large depth of field, long working distance. It has many kinds of attachments. It can match with many ...

Model 888-Sulfur Recovery Tail Gas Analyzer AMETEK Process Instruments has been the leader in tail gas analysis for over 40 years-with more than 1,100 installed model 880 NSL analyzers and more than 100 million hours of run time. ...

AMETEK Process Instruments has been the leader in tail gas analysis for over 40 years-with more than 1,100 installed model 880 NSL analyzers and more than 100 million hours of run time. The Model 888, the successor of the 880 NSL uses ...

Mantis Compact is an ergonomic, low fatigue visual inspection microscope, excelling in the low magnification range for inspection tasks where bench magnifiers have traditionally been used. Featuring Vision Engineering's patented eyepiece-less ...

SmarAct's goniometer stage is suitable for use in high-precision angular alignment. It is made with a footprint of 50x50 mm?, and a height of 17 mm. The unit features a maximum blocking torque of 20 Ncm, and travel rate of +/- 5?. ...

The Opto's tilting stand is equipped with a solid rock plate, which makes it possible to maintain its stability. It also has a huge optical materials with lateral extensions. Its 3D inspection system for electronic boards is establish ...

The QuickTOCNPO, manufactured by LAR Process Analysers, is a 4-in-1 combined analyzer. It is an online measurement system used for the simultaneous determination of TOC, TNb, COD, and TP. It has a measurement range of 0.1 - 200 mg/l for ...

The ELTRAs TGA Thermostep is a type of a thermogravimetric analyzer which has the function to determine different parameters including moisture, volatiles, and ash, in a user-defined temperatures and atmospheres using single analysis. ...

MTO MZPS0850 series parallel optics zoom stereo microscopes have two types, MZPS0850(binocular) and MZPS0850T(trinocular). It is characterized by parallel optical system. Magnification range of zoom body is 0.8X~5X, magnification from ...

The Need In the past, conventional Claus Sulfur recovery processes were adequately controlled on the basis of ratio or excess process air. The development of new and modified sulfur recovery processes has dramatically changed the analytical ...

The new EXAxt 450 series builds on the superior functionality of the industry leading Yokogawa EXA series by enhancing the EXA's proven operation and application flexibility. The Model 450 series feature a uniquely simple touch screen ...

Mantis Elite is an ergonomic eyepiece-less stereo microscope, offering superb optical performance with magnification options up to 20x, making it a perfect alternative to more traditional inspection stereo microscopes. Winner of numerous ...

The SP3 is an automatic replenishment system designedfor use with Rohm and Haas Electronic Materials copper microetch chemistry. The SP3 is most commonlyused to replenish 3330 microetch chemistry. The SP3provides an electrical output ...

Push a button, print the report and your done. Thermo Scientific NORAN? System 7 X-ray Microanalysis System has a very reliable, simple and easy to use system that enables micrscopists to get the finals answer quickly. It features highly ...

The measuring stages are designed solid and highly adjustable when employed. Their precision depends on the supplied micrometers screw of up to 0.001 mm. All the stages are enclosed in a black finish, and have 4 M5 threads in the bottom ...

This multi-functional device allows the determination of up to six quality parameters with only one measurement: SF6 concentration (%) Moisture concentration SO2 concentration (ppmv) OPTION: HF concentration, H2S concentration, ...

Features: 1.Precise linear ball guide rail 2.Micrometer head 3.Center drive 4.Spring reset 5.There are standard mounting holes on the top and bottom plate

MZS1065 series zoom stereo microscopes have two types, MZS1065(binocular) and MZS1065T(trinocular). It is characterized by unique optical design, large depth and width of visual fields, long working distance. It has many optional stands ...

This is a cholorimetric process analyzer used in the automatic and continuous measurement of phosphate. It is noted for its measuring range of 0.01 to 10 ppm. The device is built according to the measurement principle of ISO 6878. This ...

The 682T-HP Model is a total sulfur analyzer developed by AMETEK Process Instruments. It is mainly used for examination of sulfur in highly viscous hydrocarbons such as residual and crude oils. This unit is suitable for high temperature ...

Mantis Elite-Cam HD is a variant of the successful Mantis Elite stereo microscope, with an internally integrated USB2.0 digital camera, bringing image capture capabilities to the outstanding optical performance of Mantis. By adding ...

The Ronalyser ENS is an automatic analyser/controller designed for use with electroless nickel processes, to maintain the plating conditions at their optimum. The ENS samples the solution and when the nickel concentration falls below ...

A lightweight, handheld device used for fast raw material identification is the Thermo Scientific TruScan analyzer. This is specifically outlined to meet the demanding standards of several sectors like pharmaceutical manufacturing operations. ...

The PMA10 is a portable, sturdy and lightweight gas analyzer manufactured by M&C Techgroup. It has a discontinuous or continuous measurement, and an analogue and digital linear indication. The unit features four-linear measuring ranges, ...

1.High accuracy dozing and working: adopt 4 KNF pumps work for dozing, measurement liquid volume. 2. Complete compatible design: Using 300mL tubes(?42mm), compatible with con-generic products perfectly 3. Easy Maintenance: Pre-install ...

Stroke : 25, 13 mm

Description Colorimetric process analyzer for the automatic, continuous measurement of phosphate. Measuring range: 0.1 to 50 ppm (mg/L) PO4 Based on colorimetric measurement principle. Complete system including measurement and control ...

Features and Benefits 48kV X-ray tube Polarized X-rays using HOPG for measuring lighter elements One moveable secondary target for measuring heavier elements Rugged proportional counter detector with filters Onboard ...

The concentrations of SO2, NO, CH4, CO2, CO and O2 components in sample gas are measured by the IR400 infrared gas analyzer. The nondispersion infrared method (NDIR) is used to measure NO, SO2, CO, CO2 and CH4 while either the built-in ...

Lynx EVO is a high productivity stereo microscope without eyepieces, powering your productivity through stunning 3D imaging. The unique patented eyepiece-less optics of Lynx EVO liberates users from restrictive working practices, opening ...

The EC3 is an automatic analyser designed for use with Circuposit Electroless Copper 3350 process. When the copper concentration falls below the low preset value, replenishment via metering pumps commences to maintain optimum concentrations ...

Enables photography with a Nikon COOLPIX digital camera Stereoscopic observation at 20x magnification Made with environmentally friendly materials Built-in illumination system Exclusive compact design for easy operation

The KJT500SH model is manufactured by Kett US, and is a NIR multi-composition tester that is easy to use, which allows to conduct accurate continuous measurements of product components. It has a measurement range of 0 to 100% with a distance ...

Feature? ? Integral metal heating, while scope and high precision of temperature control. ? Timer and timing functions are available. ? Exclusive air insulation technique leaves the case in room temperature, has thermal insulation ...

The Dynamic Foam Analyzer - DFA100 from KR?SS for analyzing foams measures the foamability of liquids and the foam stability based on precise measurements of the foam height. With flexibly deployable modules, it also measures the liquid ...

Complete monitoring system for the automatic, continuous measurement of silica in water steam cycles. Measuring range: 1 to 5'000ppb Based on colorimetric measurement principle Complete system including: measurement and control electronics, ...

CW240 power meter is a one-stop solution for improving energy efficiency, finding areas for improvement and assessing equipment lifecycles. This device is capable of providing in-depth information about an item of equipment, or even an ...

The EN3 is a two channels automatic analyser designed for use with Ronamax and Everon electroless nickel processes. When the nickel concentration and/or pH fall below their pre-set values, replenishment via metering pumps commences to ...

* Compact, portable body * 20x magnification * Stereoscopic microscope * Built-in illumination system

Systech Illinois' Gaspace Advance Micro Oxygen and Carbon Dioxide Analyzer is commonly used for testing applications with minimal amounts of headspace in gas-flushed food and pharmaceutical goods. This apparatus features a 3-second response ...

The Ross Miles Foam Analyzer ? RMFA from KR?SS is the world's first instrument for automatic measurements of foamability and foam stability in accordance with ASTM D 1173. The RMFA uses standardized vessels in a newly-developed measuring ...

NEW: Trace silica measurement for high purity water applications. Complete monitoring system for the automatic, continuous measurement of trace amounts of silica in ultra pure water. - Measuring range: 5 ppt (0.005 ppb) to 25 ...

Measuring Fat and Oil in Food using the MQC Benchtop NMR Analyser. Fat and oil in food play a key role in determining the nutritional value, product quality and consumer appeal of the products in which they are incorporated. Routine ...

The Revolution XDh upright microscope system allows users to combine an upright microscope with a full component system. It utilizes technology such as laser-based microscopy, spinning disk technology, and more, in a full XD component ...

Stroke : 10 mm - 16 mm
Speed: 0 m/s - 0.01 m/s

The KB30 is the latest innovation in NIR technology from Kett and joins our extensive line of portable, desktop and online/inline analyzers. This instrument provides advanced instant moisture measurement at entry-level pricing. All solid ...

Features: 1.360? rotation 2.1/4-100 Fine Thread Screw 3.High Precision, Good Stablity 4.There are standard mounting holes on the upper and bottom plate.

The X-LRQ-E Series devices are Zaber?s recently released industrial-style stages, combining high load and thrust capabilities in a compact size. The dual-rail design has a low profile measuring only 36 mm high, with a 100 kg load capacity. The ...

Complete monitoring system for the automatic, continuous measurement of silica in water steam cycles and high purity water. - Measuring range: 0.5 to 1'000 ppb - Based on colorimetric measurement principle - Complete system including: ...

Based on optical emission spectroscopy, the FOUNDRY-MASTER Optimum is the ideal instrument for seamless quality control, analysing the majority of metals and their alloys, including Nitrogen in duplex steel. It has a small foot print ...

The Revolution XDi is typically used for live cell imaging as it is based around an inverted microscope. It is suitable for a wide variety of samples that demand meticulous control in the environment. Its key features include the use ...

The MML94 Model of Microwave Moisture Analyzer Online, manufactured by Kett, is specifically designed to provide instant, on-line measurement of fluids, solids and slurries without sample preparation, and handling or alteration of application. ...

l Low cost and perfect performance for speciation and total amount analysis of heavy metal elements, comparable to ICP-MS. l High automation speciation analysis, realizing control of the whole system (including HPLC separation system) ...

Zaber has added a space-saving parallel drive configuration to the X-LRQ-E family. These stages have high cantilever load, speeds up to 840 mm/s, loads up to 100 kg, and a built-in controller with motor encoder, which provides closed-loop ...