Fall arrest equipment: Anchorages, Pulleys, Rope clamps

Pulleys are grooved wheels designed to redirect to force applied to a cable or belt. Used in Flex-E-Grip, Max-M-Drive, Pow-R-Vee and Misc. Belts Materials: Stainless Steel, Aluminum and Plastic

V-belt Pulleys to DIN 2211/2217 Material EN-GJL-200 pre-drilled or ready-drilled with key slot, deliverable at short notice from SPZ profile ? 50 mm to SPB profile ? 630 mm

Pulleys are grooved wheels designed to redirect to force applied to a cable or belt. Used in Flex-E-Grip, Max-M-Drive, Pow-R-Vee and Misc. Belts Materials: Stainless Steel, Aluminum and Plastic

Pulley / Nylon, Plastic Pulleys For Casters, Lawnmowers, Tractors And Automotive Applications Made of metal and plastic, our tensioner / idler pulleys have perfect wear resistance, vibration and friction. They reduce dust, salt and other ...

Personal Fall Protection System for the stage of the formwork decking process, or instalation of: guardrails, gallows-type safety nets, formwork risers, and in general all formwork assembly activities that entail the risk of falling from ...

A pulley is a wheel on an axle that is designed to support movement and change of direction of a cable or belt along its circumference. Pulleys are used in a variety of ways to lift loads, apply forces, and to transmit power. These pulleys ...

TB Woods Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications ...

The V-Belt Pulleys from Madler are suitable for use in tamper clamping bushes in compliance with DIN 2215. These equipment are ready to be installed, and are available with taper bushings for different shaft diameters. In addition, ...

The TESMEC's load fall arresters of the SDA series are self-guided, self-locking, and operate on a special rigid track, made from aluminum, and are therefore very lightweight. They feature a polyamide mini energy-absorber and safety spring ...

Made of metal and plastic, our tensioner / idler pulleys have perfect wear resistance, vibration and friction. They reduce dust, salt and other contaminant that injure pulley life. The high quality bearings are used to operate for high ...

Personal Fall Protection System that facilitates the safe execution of work carried out at heights, in environments that ordinarily present important hazards of falling from heights.Individual protection system that facilitates the safe ...

DURA-BELT?S Twin idler Pulley and Drive Pulley is equipped with a double sheave for different kinds of belt cross-sections. The 83A/85A durometer belts can be used with this conforming to the pulley groove independent of the groove radius. ...

The pulleys conform to ISO 4183 and DIN 2211. Designed for use with both wedge (narrow) and classical v-belts. B=E(n-1)+2F n=No. og grooves Dimensions in milimetres Material: Fine grain cast-iron grade 220-260 Eccentricity of O/D ...

Rope sheave, cast iron with dimensions according DIN 15061

Personal Fall Protection System that enables truck loading and unloading procedures to be carried out safely, including maintenance operations and, in general, all those situations where there is the risk of falling from heights. Simple ...

The V-belt Pulley, developed by Dura-Belt, is mainly used for drive pulleys. It is built with nylon construction and reinforced with fiberglass. The system also comes with 3/16 in width and 3/32 in depth. In addition, the 1 in bore is ...

The DriveAlign was created by drive system specialists with the premise of avoiding reducing belt performance when the vehicle slows down because of the use of heavier alternators by manufacturers because of seat heating, air conditioning ...

Rope sheave, steel with dimensions according DIN 15061

DURA-BELT manufactures a variety of lineshaft spools and C-Clips (Shaft Collars, Snap Rings) suitable for wide range of operations. The Regular-Spools float on lineshaft (line shaft) to prevent boxes from abrading functioning as clutches ...

This range of assembly belt drive system accessories are developed and manufactured by Gates. With its wide, comprehensive variety of pulley and idler components, users can be ensured accurate tolerances, enhanced performance, correct ...

Two-piece split spools for line shaft conveyors are an excellent alternative to one line-shaft spool pulleys. They allow replacement of spools without disassembling the conveyor, reducing labor and conveyor downtime. Rep spools are standard ...

Tsubaki pulleys that specialize in engagement transmission High quality Special hard to process designs are available as made-to-order products. We offer a wide line-up, including Fit Fores and keyless locking ...

There is no concept of a timer in friction drive pulleys which are generally flat faced and are rather left uncrowned. Such a recommendation can be explained by a Belt Technologies engineer familiar with metal belt dynamics. However, ...

PCB80 PA6 wheel 80mm Takes cord 6mm Hook 10mm Load cap. 120kg Yellow bichromated steel PCB100 PA6 wheel 100mm Takes cord 10mm Hook 10mm Load cap. 150kg Yellow bichromated steel

Toothed Belt Pulleys for tapered holding bushes pre-drilled or ready-drilled with key slot 3M profile to 14 M T2.5 to T10 and XL to XH Deliverable off the shelf ? 9.5 - ? 962 mm to a belt width of 170 mm

This revolutionary Pulley/Prusik-minding modular structure is a high strength and torsion-resistant building block used within rescue and rigging operations. Component Benefits > Modular: Cartridges can be easily exchanged to reconfigure ...

A TYPE SHEAVE: 1 plate+ 1 welding Due to its 1 + 1 design and cold working manufacturing process, A type sheave is a very competitive option with high quality. As it is naturally limited to heavy loads is greatest choice for small and ...

Hand pulley block TXK HPB is a UK design, is used to change the load line direction with a machined steel sheave. The groove and sheave is made from high quality machined alloy steel to suit its intended rope diameter. It manufactured ...

The Pulleys T2 Series is manufactured by Madler. The product has a compact design, since it is made of Acetyl resin and die-cast models can be availed upon request. The device comes with a machined bores and the only color available is ...

Fit Bore Timing Pulleys can be ordered just by the model number because shaft bore, key, and tap processing are standardized. Quick delivery of timing pulleys with finished bores. Available model PX Pulley P5M, P8M Trapezoidal ...

LIGHT ENOUGH TO ALIGN TO THE LOAD Harken Oceanic Cable blocks are used on vessels to safely lead cables & towed objects overboard. At only 19.3 kg (42.5 lb) the 500 mm (19.7 in) sheave diameter pulley is light enough to align to the ...

The magnetic pulleys are used for the automatic separation of little and medium sizes ferrous pieces (for very little ferrous pieces the use of magnetic drums is better). The pulleys pick up the ferrous pieces that are closer to the band. ...

Roller with ball rollings Width : 200 mm ? : 150 mm Space requirement : 245 x 245 x 245 mm Weight : about 10 kg

KEE ANCHOR Safety Solutions for a Portable Deadweight Anchor In the absence of collective fall protection systems, mobile man anchor systems are commonly used to make working at height much safer. Kee Anchor? - a modular dead ...

Our anchorage connectors are built from top quality materials guaranteeing high-strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked ...

Timing pulleys have teeth or pockets positioned radially near to the outer diameter of the pulley machine. Teeth are used to employ timing holes in the metal belt and pockets employ friction on the inside part of the belt.This pulleys ...

We supply V-belt pulleys in a variety of sizes. Conforming DIN 2211/2217 Balanced in quality grades G16 or G 6.3. EN-GJL 200 material Available ex warehouse from profil SPZ 63 x 1 groove to profil SPC 1250 x 10 grooves For circumferential ...

* With webbing strap * Working load limit (WLL) 500 kg * Breaking force 22 kN * Closed height: 1.5 m and 1.75 m * Weight: 13.6 resp. 14.3 kg

[Application] These pulleys are utilized to remove iron as with electromagnetic pulleys. [Features] The powerful magnetic force and its effect last almost perpetually. No power source is required to generate the magnetic force. Robust ...

The Latchways ManSafe fall arrest system incorporating the Constant Force post is applicable to all the major forms of standing-seam roofs. It operates horizontally and along inclines and can be designed to accommodate up to three simultaneous ...

Since not all operations run at uniform speeds due to ambient conditions, Variable Speed Drives are required. Lovejoy Inc.'s Econoline Series of variable speed drives feature maintenance-free designs at economical costs. These drives ...

Conforming to DIN 2211/2217 Available with pilot bore or as pre-bored version if desired with keyways and adjusting screw. Balanced in quality grades G16 or G 6.3. EN-GJL 200 material Available ex warehouse from profile SPZ 50 x ...

The Model 180 Spring-Loaded Driver Pulleys are designed with an anodized aluminum nozzles that ensures minimized vibration and quiet operations. They are resistant to corrosion and rated for 0.33 HP through 1.5 HP engines. These driver ...

We produce without costs for pattern equipment V-belt pulleys to your individual specifications in all conventional profiles up to a diameter of 2,250 mm. Selectively available in arm or floor design and individually adapted to suit ...

Forged alloy heat treated hooks. Forged steel swivel tees, yokes and shackles. Hook and shackle assemblies on 4-1/2 through 14sizes can be interchanged. Can be furnished with bronze bushings or roller bearings. Opening feature permits ...

Idler Pulleys Timken?s integrated, pressed-steel idler pulleys combine a precision ball bearing with rubber seals to create a self-contained unit. Design Attributes A single-row radial ball bearing with an inner ring extends on both sides ...

Triple pulley 3 rollers Width : 115 mm ? : 220 mm Space requirement : 650 x 380 x 380 mm Weight : 15kg

The 2.13 Aluminium Tripod is lightweight and portable without sacrificing strength or durability, with setting up being quick and easy requiring only one person to do it. It takes up a maximum diameter of 1.6m with non-slip rubber feet ...

The variable speed drives manufactured by Lovejoy, Inc. has an efficient and reliable way of changing speed. These drives are necessary because many applications do not run at the same speed all the time, dependent on the surrounding ...

This Pulley by Schmersal is compatible for wire rope with ? 3 mm, is made out of a NIRO stainless steel with a weight of 86 g. This is primarily used to maneuvre the wire rope where the path is not a straight line. Additionally, pulleys ...

Rope Pulleys SRB with movable side plates Roller made of steel, galvanized, with ball bearing. Side plates with eyelets, powder coated. Rope assembly by twisting the side plates.

We supply V-belt pulleys in a variety of sizes. Conforming DIN 2211/2217 Balanced in quality grades G16 or G 6.3. EN-GJL 200 material Available ex warehouse from profil SPZ 63 x 1 groove to profil SPC 1250 x 10 grooves For circumferential ...

Hailo fall safety protection devices with rescue lift equipment (HRA type) are equipped with a winch unit. In the event of an emergency rescue following a fall, this winch unit can easily be locked on by a second person, e.g. if someone ...

Auto triggered drums - (TAS) - Always Innovating Tor Tec offers a new concept in drive systems for Belt Conveyors. This integrated solution combines in a single product all the vital elements of the system drives Belt Conveyors. With ...