toggle press / manual / punching / assembly

... the need of the operator. These conventional mechanical presses require automation with a high quality, high production and ergonomics which are operated by a central computer enabling ...

... installing, a press and a feeding line is allied together. Its line consists of a straightener, an uncoiler and cyclical pinch rolls. These sustain the system once after every stroke of a mechanical/servo ...

The Servo Press by Fagor Arrasate has refined the new range of manufacturing parts with servo driven mechanical presses that features mainly the elimination of the inertia fly wheel and ...

... Fagors monoblock presses or servo-presses are equipped with features such as changing strokes and run, different tools with various features and cushions at the bottom. This extremely dynamic press ...

Pressing force: 5500 kN - 50000 kN

Pressing force: 2700 kN - 16000 kN

Pressing force: 245 kN - 2452 kN

Die makers you need prepared presses to try and test the dies being manufactured in a factory, in order to satisfy customers' requests. Fagor Arrasate offers flexible presses, with various features that are designed to stimulate the process ...

Die spotting presses are used with various applications, especially for the verification and manufacturing of molds and dies. In addition to the dimensions defined according to the mold or die to be proved, the required force is generally ...

Press hardening or hot forming are the processes of making metal enabling the making of high strength parts by a quick hardening of boron steels heated over 900 degrees of temperature. A common hot forming line includes a furnace, a hydraulic ...

The FAGOR Arrasatehas is recognized for plastic and composites forming lines for processing thermoplastic and fibre fortified moulded using hydraulic press consist of active parallelism control device and heating system for construct ...

Pressing force: 63000 kN - 150000 kN

The MECAFORM vacuum forming equipments/ovens are semi-automatic presses utilized for high rate industrial vacuum forming. They can make complex parts needing exceptionally deep vacuum forming in applications such as vacuum formed parts ...

Pressing force: 0 N - 20000 N

Pressing force: 2491 kN - 12455 kN

The AERO incorporates everything needed to make a perfect splice in a conveyor belt without the need for an air pump, couplings, hoses, a water tank or control box. It takes just 8-12 minutes to splice a conveyor belt with the AERO ...

Splices in monolithic belting must ensure tight pitch tolerance and be free from pinhole air pockets. Everything about the Amigo? has been designed to do just that. And in typical Novitool? design, it was made to do it with ease, safety, ...

Pressing force: 0.5 kN - 120 kN

Pressing force: 15 kN - 50 kN

Pressing force: 1 kN - 120 kN

Standard version in stainless steel AISI304 with frame on wheels. Axial feeding with ball valve. Feeding pressure switch with sound alarm to indicates end of filling cycle. Closed tank with manual opening sliding semi-hermetic rectangular ...

Pressing force: 1 kN - 120 kN

Pressing force: 3.5 kN
Opening: 20 mm - 250 mm