trapezoidal transmission belt / round / industrial / raw edge

Raw Edge Cogged Belts
Raw Edge Cogged Belts, as the name implies do not have textile wrapping on the outer surface. These are produced by slitting individual Belts from rubber sleeve and hence they are called as Cut Edge Belts.

The manufacturing methods also make it simpler to produce Belts with cogs underside thereby reducing the bending resistance of the Belts and allowing them to operate on pulleys with approximately 20% smaller diameters. The decreased bending resistance reduces mechanical losses during bending and leads to improved efficiency and reduced working temperature. Heat dissipation is further improved by the larger area between the Belt and the surrounding atmosphere and also by the air turbulence around the cogs during operation. Multi stage drives can be eliminated. These Belts require a higher tension than the wrap Belts so as to exhibit higher power transmission capability.

Features:
? Oil resistant & antistatic
? Maximum Belt linear speed (Classical section: Wedge: up to 42 m/sec)
? Higher power transmission capacity than Wrapped Belts
? Superior transverse stiffness & high wear resistance
? Suitable for drives with small pulley diameters
? high ambient temperature & speed
? Temperature range: -25?C to +100?C
? ATEX certified FRAS Belts are also available

Product Range (Section): XPZ, XPA, XPB, XPC,