Monobloc Tap

monobloc tap

JEL® UMGF

monobloc tap

Contact us for advice solutions and equipment provider

Type:

monobloc

Taper tap
Entry on 4 leads.
For through holes and blind holes.
Can be used on all metals and for high precision tapping.
Plug tap
Entry on 2 leads.
For through holes and blind holes.
Tapping by hand or by machine.
Straight groove machine tap with "GUN cut" entry
Entry on 4 leads.
For through holes.
The "GUN" cut drives the chips out on the other side.

Để lại bình luận

Go to the AMECA website for more information

Products relative

Cutting inserts

milling cutting insert / carbide / triangular

milling cutting insert / carbide / triangular

Kaiser manufactures inserts for compatibility with various tools. Some of these tools include solide carbide boring cutters, single cutter boring tools, twin cutter boring tools, and indexable insert drills. The inserts are also made ...

boring indexable cutting insert

boring indexable cutting insert

Equipped with geometries 33, 14, 15 and 16 for maximum boring and cutting quality, the KOMET? indexable inserts are ideal for rough and find boring, as well as reaming and solid drilling. Its cutting geometries allow high quality cutting ...

cutting insert

cutting insert

Indexable insert with coating BK7615 Top cast machining performance with BK7615 Increase in process reliability Reducing the processing time by increasing the average Increase in contact time of up to 100% possible Top ...

square cutting insert

square cutting insert

2.2 - 5.2 mm, 0.4 - 0.8 mm | W80 series

roughing indexable cutting insert / turning / finishing / for steel

roughing indexable cutting insert / turning / finishing / for steel

?Walter AG now offers three additional efficient, effective and excellent steel cutting geometries in its Tiger?tec Silver? range. First in line is FP4 which runs on chip control for accurate precision machining. It is engineered to deliver ...

turning cutting insert / CVD / for steel / for cast iron

turning cutting insert / CVD / for steel / for cast iron

The Walter AG had proposed a fresh geometry which embodies the latest Tiger.Tec Silver HU6 round insert for medium and heavy duty roughing application. This unique insert is ideal for medium to bigger drafting. Also, it has a chip which ...

turning cutting insert / PCD / PVD / for stainless steel

turning cutting insert / PCD / PVD / for stainless steel

- Long tool life: PVD aluminium oxide (Al2O3) prevents the transfer of heat into the substrate - Maximum wear resistance and temperature resistance when machining stainless steels and heat-resistant super alloys - Maximum cutting ...

turning indexable cutting insert / CVD / for steel

turning indexable cutting insert / CVD / for steel

Tiger?tec? Silver ISO P Generation by Walter is a newly designed cutting tool material. Released with interesting combinations of new grade and new geometries, this unique material has CVD coating process and is integrated with universal ...

Drill bits, reamers

anti-vibration boring bar / for internal turning

anti-vibration boring bar / for internal turning

Smart Damper Turning

Bore diameter: 40 mm

boring bar

boring bar

Smart Damper Turning

A carbide bar with an optimized length and with the biggest possible diameter offers the highest rigidity and therefore the best result for deep hole boring. Bore depths up to 10 x Ø Carbide bars with CKB connection to be used ...

anti-vibration boring bar

anti-vibration boring bar

This anti-vibration boring bar is developed by KAISER Precision Tooling Ltd. It is using an extended reach arbor technology. This dynamic damping system is specifically designed to cater applications that include reduction of vibration ...

indexable insert drill bit / short

indexable insert drill bit / short

Diameter : 16 mm - 30 mm

indexable insert drill bit / helical

indexable insert drill bit / helical

Diameter : 31 mm - 74 mm

solid drill bit / for cast iron / for aluminum / for steel

solid drill bit / for cast iron / for aluminum / for steel

CrazyDrill Flexpilot

Diameter : 0.1 mm - 1.2 mm
Length: 40 mm - 70 mm

solid drill bit / center / 2-flute

solid drill bit / center / 2-flute

MiquDrill Centro™

Diameter : 0.5 mm - 6 mm
Length: 30 mm - 60 mm

solid drill bit / for aluminum / carbide / coated

solid drill bit / for aluminum / carbide / coated

MiquDrill 200™

Diameter : 0.1 mm - 1.5 mm
Length: 30 mm

Taps, dies and thread milling cutters

tap

tap

A-TAP Series is deigned to tackle any material, any application and any given time. Fact is that almost all tapping problems are initiated by unstable chip evacuation. The A-Tap Series by OSG is designed to solve these problems and can ...

through-hole machine tap / for steel

through-hole machine tap / for steel

M3 - M30 | S-XPF series

This complete series of forming taps provides excellent performance when tapping hardened steels, forged steels and alloy steels that have a hardness up to 35 HRC. The forming taps are available either with or without coolant. Designed ...

cutting tap / for general applications / stainless steel

cutting tap / for general applications / stainless steel

HSS tap / carbide

HSS tap / carbide

Special Taps Inquiry

Upon receiving an order, OSG can generally deliver in 5 working days depending on the availability of materials. If a coating is required then allow up to 5 additional days. Please fill out the form for your quotation.

thread forming tap / metal powder / high-performance

thread forming tap / metal powder / high-performance

thread milling cutter / helical / solid / PCD

thread milling cutter / helical / solid / PCD

Diameter : 2 mm - 20 mm

thread milling cutter / for hardened steel / helical / solid

thread milling cutter / for hardened steel / helical / solid

Diameter : 3 mm - 16 mm

thread milling cutter / for hardened steel / end mill / solid

thread milling cutter / for hardened steel / end mill / solid

JEL® MGF XH Micro

Diameter : 1.5 mm - 2.5 mm