truck loading and unloading retractable fall arrester

The COMBISAFE? Loading System MkII is designed to prevent falls from height during the loading and unloading of equipment from the top of a flatbed delivery lorry/trailer in a safe manner. Featuring the NEW SkyReach Anchor device which incorporates a retractable fall arrest block this in turn connects to the full body safety harness worn by the operative.

Available flat packed, boltless and with replaceable, adjustable feet, the modular support base of the revised COMBISAFE Loading System, allows the disassembled units to be stacked.

Each system includes a weighted base ballasted with three tons of precast ballast blocks, which are interchangeable with the previous designs: alternative ballasting material such as a well compacted 10mm rounded pea gravel* or site-cast concrete can still be used.

When working at low heights, the standard Loading System MkII can be used which allows an operative to work up to 4.3m in height from the ground level. Just one COMBISAFE Loading System MKII is required for a 8m length flatbed trailer but two will be necessary if the vehicle exceeds 8m and the user must be connected to both systems simultaneously.

When working at higher positions the system can be equipped with the SkyReach Loading System Adaptor which gives 5.9 metres in height from the ground to the anchor point position.

This mobile unit can be positioned adjacent to a lorry bed with a working radius of up to 8.5 metres

*Ballast must weigh no less than 2800kg when in use