Sample preparation

The SteriBag is a sterile bag manufactured by Burkle. The bottom the bag unfolds as soon as the bag is filled with any liquid. It makes the bag to stand up stable and enables to have a separate stand. The wire bracket at the closure of ...

Maximum temperature: -15 ?C - 35 ?C

TPW? Automated Sample Preparation Workstation Assay and content/blend uniformity for up to 100 samples 20 520 mL initial extraction volume Waters Empower? Interface Powerful dEsign? variables for streamlined DoE studies Extraction After ...

Highly reliable with minimal effort The SC1 automation unit for individual samples is available as heated version suitable for performing density measurements on samples which are solid at ambient temperature, such as paraffins, vaseline, ...

The highly recommended solution to handling sample systems and assures top performance from your gas and moisture analyzer systems comes the excellent GE. It has historically proven analyzer application expert with more than 40 years ...

Application: Cut-off saw for lab cutting of plastics, non-ferrous metals, steel, glass, ceramic, etc., along with PCB's made from laminated paper or fibreglass. Area of application: Lab, workshop, production. Should only be used in a ...

Every Labtech water chiller is provided with an electronic display to monitor and control the temperature via PID technology with a stability of ? 0,1?C. The liquid circuit pressure is monitored and controlled via an analogic pressure ...

Technical Data: Cutter with clamping device for foil. Carriage running in ball bearings. Cutting knife can be turned and used four times. Strip length: 200 mm Application: To cut foils for testing purposes

Formed Sampling Cylinders are used in refineries and petrochemical plants. They are used for grab sampling for chromatographic analysis. These act as snubbers in reactor feed lines and surge accumulators in high pressure gas systems or ...

Application: for hydrofluoric and perchloric acid digestion, wet digestion agents and their mixtures, up to digestion temperatures of 50?C - 300?C, for evaporation and oxidization. Residue-free functioning makes the compact digestion ...

Technical Data: Cutter with clamping device for foil. Carriage running in ball bearings. Cutting knife can be turned and used four times. Strip length: 200 mm Application: To cut foils for testing purposes

Application: Cut-off saw for lab cutting of plastics, non-ferrous metals, steel, glass, ceramic, etc., along with PCB's made from laminated paper or fibreglass. Area of application: Lab, workshop, production. Should only be used in a ...

X travel: 3000 mm
Y travel: 1500 mm
Laser power: 500 W

Application K?hner coolers are used to cool air and gases. Then the cold gas can be used, for example in air conditioners or for process applications. The heat extracted via the medium in the tube circuit can also be utilised. Media Water ...

Pressure: 0 bar - 800 bar

The Gilson GX-274 ASPEC brings all the advantages of the GX-271 ASPEC and performs extractions up to four times more quickly. This system is a complete solution for SPE: sample prep and run. The innovative mobile racks allow you to ...

LAB-ATEX - Solvent washing apparatus for medical fibres Responding to the latest needs for special machinery to treat technical textile fibres, POZZI LEOPOLDO has designed and manufactured a new washing apparatus for medical fibres made ...

The K?hner circuit distribution system consists of a cooler in the exhaust has flow and a heater in the supply air flow. A constant fluid volume circulates through these two directly connected heat exchangers. The return temperature of ...

The CUTLAM? micro 2.0 is a compact laboratory micro-cutting machine intended for precision cuts on the most sensitive materials. The speed range and the cutting chamber capacity make this machine incredibly versatile. You can use it for ...

Pressure: 0 bar - 800 bar

Pressure: 50 bar

Power: 20 W - 450 W
Maximum temperature: 38 ?C - 120 ?C

Rotational speed: 900 rpm - 3000 rpm

The CUTLAM? micro 2.0 is a compact laboratory micro-cutting machine intended for precision cuts on the most sensitive materials. The speed range and the cutting chamber capacity make this machine incredibly versatile. You can use it for ...

Bath, used for removing paraffin wrinkles and foam(bubble) in pathology room & hospital laboratory, is made of aluminum. Digital controller ensures precision temperature control. Settings for the temperature can be easily done with ...

Power: 42 W - 370 W
Maximum temperature: 38 ?C - 120 ?C

The 860 KF Thermoprep is specially designed for thermal sample preparation in Karl Fischer titration. It is not possible to analyse numerous substances by direct Karl Fischer titration as they are not soluble, react with the Karl Fischer ...

The Large Cryogenic Ball Mill (model: 6870), manufactured by Horiba Scientific, is capable of accommodating samples sizes ranging from 0.1 up to 50g. In addition, this type of mill is particularly devised for cryogenic grinding as well ...

The Sieving Riffler is designed to handle larger quantities of powder than the Rotary Micro Riffler. Additionally, particles larger than a particular size and/or foreign bodies can be excluded from the riffling process by attaching a ...

The X-SIZE? Automatic Sampler is made to take any sample size automatically in times of blending or mixing operation. It takes samples at any point in a process system to verify dry bulk components. The sampler is programmable to ...

A cost effective hydraulic press solution for FTIR pellet preparation. The Specac Mini-Pellet Press is an innovative low cost solution for the pressing of 7mm KBr pellets. Designed for use on a laboratory bench top, this dedicated KBr ...

The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz? particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals ...

The Ministry of Agriculture, Nature Management and Fisheries has deemed the sampling of slurry compulsory. D-TEC makes it very easy for the driver with the MMA, the Slurry Sample Device. This device taps slurry and packs it into sealed ...

Based on the principle of an intrusive piston sampling fixed volumes, the Isoloks series of sampler is a proven product in many applications including : Waste water sampling Slurries sampling Cement sampling Nuclear products Very ...

The PRV200 model is manufactured by Eriez, and is a secondary splitter that is intended for installation within a chute system for use in laboratories. There is a sample cutting cone that has a nonstop rotation and at constant velocity ...

The Continuous Fraction Collector from Brandel introduces an entirely new method of working with extremely small sample volumes for later analysis. In addition to being faster, more precise, and more versatile than conventional methods, ...

Rotational speed: 70 rpm - 80 rpm

The SR8100 robotic autosampler is designed to maximize the performance and throughput of the SR7000 and SR7000DC Surface Plasmon Resonance instruments. The SR8100 is easy to operate and easy to maintain. It is specifically designed for ...

The Horiba Scientific offers the Cryogenic Grinder 6970EFM, built for DNA or RNA extraction without shearing. The device is a large capacity, high-throughput, cryogenic mill that accommodates samples from 0.5 up to 100 grams. This equipment ...

TQC Machu Scratching Tool to perform a Machu test (corrosion test) with. Each tool is provided with a 1mm width cutter to cut the coating down to the metal, complying with ISO 17872. Two models are available: The TQC Machu Scratching ...

The WS750 wastewater/stormwater sampler's state of the art controller gives you complete control over your wastewater/stormwater sampling process. With the wastewater/stormwater sampler's sample size control, you can take individual ...

The Cross Belt Sampler is able to get a typical sample of granular material straight from any type of moving trough belt conveyor. The unit uses a sweeping movement in one direction to sweep material off the belt and into a fixed collection ...

The Simulated Distillation Analyzer, based on Agilent's latest Gas Chromatography design, has a high-performance MMI (multimode inlet) with optimized design for Simulated Distillation applications. The analyzer comes with simple, ready ...

The Dionex AS-AP Autosampler is designed for high precision, reliability, ruggedness, and ease of use. The AS-AP can be used with the entire ICS product family and provides high-performance, automated sample processing for ion chromatography ...

Herzogs OptiDist is a truly revolutionary automated distillation analyzer, offering the highest level of precision and ease of use ever seen in an instrument of this type. Its a state-of-the-art optimal solution for performing atmospheric ...

The ShaQer? provides a high-throughput and updated pesticide extraction. The device can agitate six samples continuously in comparison to the two samples done by hand. The use of vigorous clamp movement results in a thorough extraction ...

? Holds 100 samples in two 50-position vial racks ? Operates with one or two Eclipse 4660 purge-and-trap instruments ? Vial cooling option keeps vials at 10?C or less in accordance with USEPA Method 524.3 ? VOA Constrictor? vial gripper ...

The AbrasiMet? 250 is an instrument manufactured by Buehler, and it is a cutter that features manual cutting action with adequate lighting, visibility and cutting capacity. The work space enables the unit to move quickly. When combined ...

RESS process is base on that the solute is dissoluble in SCCO2.The solute is initially dissolved in a solvent at high temperature and pressure. It is then heated under supercritical conditions and allowed to expand rapidly through a short ...

CompacT SelecT SC is a new system designed for the maintenance, expansion and differentiation of stem cells for research and screening programmes. Based on proven technology, CompacT SelecT SC grows cells from multiple cell lines in ...

Automatic material preparation every pail Minimum downtimes are ensured through the quick and clean pail change. Our modular designed material preparation system PPS stands out in particular through easy and quick handling as well as ...

? Unattended operation eliminates manual sampling ? Inert sampling system for sample integrity and minimal carryover ? Flexible, easy programming of sampling sequences ? Compatible with the Eclipse Sample Concentrator The fully automated ...

The AbrasiMatic? 300 is a cutting machine developed by Buehler specifically for laboratory use. It is a bench top cutter which cuts manually in three directions or cuts automatically in a single direction. The machine has four sectioning ...

The ED-S series by LabTech Srl is a Sample preparation unit which features its performance having a clean, economical and efficient digestions. It comes with a heating surface which is made of graphite or stainless steel that is protected ...

A complete line of chillers was outlined and made for the biogas. A scope of 22 chillers for cooling biogas plants from 85 Nm3 of biogas to 6800 Nm3. Green Box gives chillers to the biogas field since 1996. More than 280 units have been ...

The mid-belt RS sampler, designed to sample up to 4" material including coal, limestone, ores and woodchips, features low maintenance and heavy-duty construction. The low cost design is proven to provide installation with ease. The RS ...

The Delta? 10221X series is manufactured by Buehler. It is a cutting machine that is suitable for laboratory use. This automatic cutting machine is designed for productivity increase, as well as to reduce handling differences between ...

The AbrasiMet? 250 is an instrument manufactured by Buehler, and it is a cutter that features manual cutting action with adequate lighting, visibility and cutting capacity. The work space enables the unit to move quickly. When combined ...

Maximum temperature: 60 ?C