Pressure regulators

Pressure: 1.5 bar - 15 bar
Orifice diameter: 0.13 in - 0.25 in
Flow: 600 l/min

The In-Line Preset Regulator of ToolReg? has an automatic secondary pressure relief, particularly in times when the residual pressure in the tool is removed from the compressed air supply line, avoiding the unexpected actuation of the ...

The Series HZE-R is a pneumatic automation air treatment regulator that has an ambient temperature of 0 ? +60 ?C and a fluid that is filtered by air. It has a max inlet pressure of 10 bar, 1 MPa and 145 psi. It ha s nominal flow ...

Cost effective and clean looking, series AR-A regulators offer various pressure range settings to accommodate most applications. The locking adjustment knob prevents accidental setting changes. The modular design of the AR-A series connects ...

For vacuum pump P6010. Programmable for constant vacuum level. The signal input regulates the feed pressure to maintain a constant vacuum level. Integrated analogue vacuum sensor.

RP1000:Precision regulator for extremely low and low pressure range; 0.003 to 0.1MPa. RP2000:Long service life, large flow rate precision regulator appropriate for balancer. RP1000/2000 Common Large relief flow Small stable flow rate ...

single-seat straight-way valve for low flow rates, high pressures up to 300 bar | suitable for liquids and gases | body and spring cap made of 316 stainless steel - surface quality ? 0,8 ?m | corrosion-resistant and compact | diaphragm ...

Fluid pressure regulator can be release up to something like 10 liter/least and easy maintenance using standard tools. It is made from stainless steel and available from different pressure regulator ranges. Flow- or return regulators ...

Pressure: 0 bar - 12 bar
Orifice diameter: 0.25 in
Flow: 1000 l/min

The Protect-Air CartReg? is a miniature in-line pressure regulator that delivers specific outlet pressure in every operation. This unit should be attached directly on the pneumatic tool or system to assure accurate allocation of pressure ...

Series AR-B regulators from SMC have been updated to the new urban white base color for a clean modern look. The AR-B series has a maximum set pressure of 125 psi and offers embedded gauge and pressure switch options not found in the ...

1750 Series Water Pressure Regulators protect all Flojet electric and air-operated pumps from exessive inlet water pressure. Typical applications include ice makers, drink valves and other beverage appliances from excessive inlet water ...

BALL REGULATOR The Ball Regulator is used for integration on color changing blocks or can be used as a stand-alone product. DESCRIPTION The regulator absorbs the variations of paint pressure generated by the supply system (pulsation ...

High accurate and high response system that electrically controls air pressure and flow This controller can operate a computer and others by remote control, which is specific to electronics device, and is best suited as thrust controller ...

Item Name: R072N Item Number: Preset In-Line Regulator

To increase the flexibility of an abrasive blast cleaning machine to most obvious addition is to fit the machine with a Pressure Regulator. This will allow the user to precisely reduce the pressure into the machine, and therefore the ...

What is EPR? EPR is an electronic device designed to use one or more torches with different pressure connected to a single gas generator. When it is used? It is used when the operator needs to set itself a gas pressure different from ...

The fluid regulator is an independent membrane regulator that can be installed in every compressed air and fluid system. It supplies a constant, exact outlet pressure regardless of the input pressure. The pressure is factory-set and cannot ...

Orifice diameter: 0.25 mm

This is one of the latest additions to the series IR of precision regulators. This product impresses with its lightweight and compact design, but also through the expanded maximum set pressure, which reaches a value of 0.8MPa. In ...

The regulation cabinet from PNR adjusts the pressure of air and water to determine the amount of water evaporated per unit of time and the size of droplet ideal for a specific application. The cabinet is supplied with all of the essential ...

The Custom series regulators are designed to maintain pressure settings for cutting, welding and heating work. The bright red and green regulators allow the operator to quickly identify red for fuel and green for oxygen. It is recommended ...

The RP-172 pressure regulator has an adjustable scale running from 0 up to 8 bars. Its range can reach up to 1.700 Nl/min 6 bar. The measure specification is 1/4 (F).

Designed to reduce first stage pressure 5-20 PSIG (.035- 1.4 bar) down to a pressure higher than 11? W.C (28 mbar), the actual pressure setting is specified in the table below. Ideal for medium commercial installations, multiple cylinder ...

Pressure: 1 bar - 8 bar

Pressure: 0 Pa - 2000000 Pa

Pressure: 100 psi - 5000 psi

Pressure: 2 psi - 15 psi
Orifice diameter: 0.88 in

Pressure: 50 mbar - 4 mbar
Orifice diameter: 20 mm - 32 mm

The differential pressure control is a direct-acting, normally closed control. This control measures permanently a differential pressure. An increase of the high pressure (HP) tends to open the control whereas a decrease of this pressure ...

Paint pressure regulators with peumatic or spring controlled regulation of the paint pressure. This new generation of paint regulators will give you high accuracy on the paint pressure and will reduce the pulsations in your paint supply ...

Pressure: 0 psi - 500 psi
Flow: 40 ft?/min - 65 ft?/min

Pressure: 0.1 bar - 10 bar
Orifice diameter: 0.13 in - 0.5 in
Flow: 1400 l/min - 7000 l/min

Pressure: 5 psi - 125 psi
Orifice diameter: 0.88 in

Pressure: 10 bar
Flow: 3438 m?/h

Pressure: 0 bar - 14 bar
Flow: 0 m?/h - 1190 m?/h

Pressure regulator VAD, air/gas ratio control VAG and variable air/gas ratio control VAV incorporating servo technology for shut-off and precise control of the gas supply to gas burners and gas appliances. For use in gas control and safety ...

Pressure controlling device for maintaining the pressure in the oil ring line. Model article number: ORM

An Automatic start-up test is performed when the breathing apparatus is pressurised. The system automatically takes you through start up testing. And you won?t make any mistakes, thanks to the user-friendly step-by-step on-screen Digital ...

Proportional Regulators regulate the outlet pressure proportionally to an electric signal (0 - 10 V or 4 - 20 mA). Thus, proportional regulators are applied, where different pressure conditions are required. As a highlight, the piezo-controlled ...

Description The Cryoreg is designed to provide all pressure regulation functions within one valve. Standard body material is bronze, yet also available in stainless steel. For use on all cryogenic pressure vessels including static tanks ...

ControlAirInc.'s Type 100 Precision Air Pressure Regulator is a multi-stage, high precision regulator which provides the maximum level of accuracy regulation and repeatability available. It is mainly used for applications that needs the ...

Pressure: 0 psi - 5 psi

Pressure: 0 psi - 100 psi
Flow: 40 ft?/min

Pressure: 0 bar - 10 bar
Orifice diameter: 5 mm - 11 mm
Flow: 350 l/min - 8800 l/min

Oil pressure reducing regulators are necessary to step down oil supply pressure to pressures suitable for various burner/combustion applications.

QS II REGULATOR UNIT has a well-proven and robust design. The unit comprises of a cylinder valve connector, a pressure regulator, a mechanical audible alarm and a pressure gauge. The flexibility of the QS II-system place very high demands ...

Pressure: 0 Pa - 100 Pa
Orifice diameter: 250 mm

Description A pressure regulating valve used to prevent the pressure in a cryogenic storage tank from rising above a pre-determined set point. The upstream pressure is applied to a spring-loaded diaphragm, as the pressure increases, ...

Pressure: 100 bar
Orifice diameter: 18 mm - 42 mm

The Fairchild Model 80 offers an accurate dual phase precision pressure controller that is ideal for high production operation requiring reduced droop and precise process regulation in a compact space. Similarly, you can modify the average ...

Pressure: 0.8 bar - 20 bar
Orifice diameter: 0.13 in - 2 in
Flow: 1000 l/min - 22000 l/min

The pressure regulator is an external controller (1") for compressed air bet-ween the compressor and the blasting system with DIN 3489 stainless steel claw coupling on both sides.

Pressure: 2 psi - 4000 psi
Orifice diameter: 1.5 in

Pressure: 16 bar - 40 bar
Orifice diameter: 25 mm - 80 mm

Pressure: 0 bar - 3 bar
Flow: max 120.0 l/h

Pressure: 100 bar
Orifice diameter: 12 mm - 18 mm

The Fairchild Model 81 of the Multi Stage Precision Pressure Regulators features high flow with double phase precision pressure regulator. It is designed for high performance, low sag and accurate process control functions. A pilot control ...

Pressure: 50, 100, 25, 160 bar
Flow: 23 l/min