Portable saws

Circular saw blade diameter: 41 mm

With its stainless steel wire, the diamond wire saws cuts most materials. It is particularly recommended for cutting delicate samples such as silicon, glass or electronic components. Low speeds allow samples to be cut whilst protecting ...

* For basic sawing applications * For unalloyed steels of low strength Suitable f?r: Structural steels, deep drawing steels, machining steels Case hardened steels, spring steels, quenched and tempered steels Low alloyed hot-working steels

Wacker Neuson's diamond blade range is tailor-made for the BFS range of Wacker Neuson floor saws. Available in a choice of three performance classes, differentiated by their segment height. Our diamond blades are "Made in Germany" and ...

The Stanley DS06 Diamond Chain Saw is a lightweight solution for fast cutting of concrete, reinforced concrete, conduit, brick and other masonry. Plunge cutting and square corner cutting is not a problem. Features: 13 inch bar capacity ...

A - Aluminium Oxide For cutting structural steel, bar stock, tubing, and ferrous metals. For use on stationary machines. C - Silicon Carbide For cutting masonry, concrete, stone, and non-ferrous metals. For use on stationary machines.

Advantages: ? Maximum productivity ? Strong continuous cutting capacity ? Longer operating life ? High cost effectiveness Description Edith-high performance band saw blade is especially suitable for all types of continuous metal sawing. ...

Circular saw blades are characterized by electroplated and braze-bonded finishing. These components are designed and constructed by Pomdi. They are engineered with a maximum diameter of 230 mm, and are specially used in radial machines. ...

I.T.E.C. offers circular saw blade with diameter range from 125 mm to 700 mm. This circular saw blade is especially designed for cutting tubes and profiles made of steel, stainless steel, plastics, compound materials, aluminum and other ...

Chain saw attachment KSV 200 Suitable for KRESS circular saw 1400 HKS and CHKS 6066 Circular saw and precision chain saw in ONE tool Universally applicable for mitre cuts up to 45 ?? 200 mm cutting depth at only 4.95 kg weight Chain: ...

With its stainless steel wire, the diamond wire saws cuts most materials. It is particularly recommended for cutting delicate samples such as silicon, glass or electronic components. Low speeds allow samples to be cut whilst protecting ...

Saw bench Seesaws 600-700W could be supply with 3 points PTO or AC 230/400 Volts Electric Motors,and Cutting Disk diam 600-700 mm,and belt drive system. The Machine is already supplied with an infeed pushing support with a lateral fence ...

Round piece diameter: 7 in

The LBS laser beam saw blades are the worlds smallest tooth pitch of 4.5 mm blades. The are engineered to be used for cutting of high tensile (>1.0 N/mm?) strength profiles and tube used in automobile industry. The size of the saw blade ...

Cutting of metal plates, sandwich panels, pipes and steel sections, non-ferrous materials and composites Can be used on building site as well as in the workshop Advantages Powerful and compact metal portable circular saw Practical and ...

Features:, basically covering most market requirements, including cutting stainless steels, alloy tool steels, die steels, spring steels, bearing steels, quality carbon steels, structural steels and other metal materials, and graphite, ...

Saw bench with sliding table 600R - 700R series with connection to three frontal points or with triple-phase electric motor, blade diameter 600 mm, belts transmission. The machine has in endow a kit of wheels to make useful the moving. ...

Round piece diameter: 356 mm

Circular saw blade diameter: 250 mm - 400 mm

Round piece diameter: 20 mm - 400 mm

Have better wear resistance teeth materials than M42 Application Tool Steels Abrasive Tool Steels Stainless Steels

Key Features The special chain tensioning device enables precise 90? cuts on all types of pipe Ideal for free-handed cutting of wood (even with nails), steel, stainless-steel, cast iron, steel plate, metal pipes and profiles, ...

Pendulum action for increased performance 3600 strokes per minute and 19 mm stroke length for fast cutting applications Robust bladeclamp for demolition applications FIXTEC for fast and easy keyless blade change Adjustable shoe Saw blade ...

Have a higher red-hardness and hardness than M42 Application Titanium / Titanium Alloys Alloy Tool Steels Stainless Steels High Speed Steels other hard cutting materials

PCD saw blades by Preziss Diamant for beam saw, classic and attack plus types for cutting chipboard individually or in packs together with scoring blade. To cut boards made of chipboard, fiberboard, composite materials, plastics, cement ...

Pendulum action for increased cutting performance Metal gearbox for extended durability Professional, die-cast aluminium base plate Patented FIXTEC system for fast keyless blade change Variable speed trigger Ergonomic soft-grip for comfortable ...

u Performs extremely well cutting hard materials u High abrasion resistance carbide teeth materials u Special teeth set mode design: set teeth or unset teeth (grinding teeth) Application u High Nickel Chrome Alloys u ...

Diprotex's electroplated diamond or cubic boron nitride (CBN) devices are part of the company's product line of diamond and CBN grinding wheels. These devices are designed and manufactured out of basic single-layer or multi-layer diamond ...

Ideal for large trimming applications and cut-up removal jobs Chain and bar can be adjusted without removing sprocket cover Sprocket cover can be removed without tools for easy saw cleaning Handle position can be oriented to horizontal, ...

The fact that Tsune is the manufacturer of machines and saw blades puts us in a unique position in the sawing industry. This allows us full control over the development and quality of our tipped saw blades. Primarily we offer tipped ...

The L series offers a wide array of circular saw blades that are available in three classes; namely the Economical, Durable and Extra-Durable. The economical is fabricated from DMo5 bright, while the durable class is formed from DMo5 ...

The fact that Tsune is the manufacturer of machines and saw blades puts us in a unique position in the sawing industry. This allows us full control over the development and quality of our tipped saw blades. Primarily we offer tipped ...

Jigsaw Blade (5 pack) - Type A Thin metal, straight cuts

Benefits -Fast and compact, -Does not blow onto the sheet metal -Efficient saw blade use -Good for use with a balancer Features -Fast and handy air saw for sheet metals -Insulated handle -Exhaust guided to the rear side -Ideally suited ...

Circular saw blade diameter: 300 mm - 350 mm

Circular saw blade diameter: 250 mm - 350 mm

Circular saw blade diameter: 250 mm - 450 mm

Circular saw blade diameter: 190 mm

HSS Saw Blades are designed to cut ferrous and non-ferrous metals on manual, semi-automatic and fully-automatic cold saws. Material:M2 HSS steel HSS saw blades are heat treated to 64-65 HRC and triple tempered and press quenched to ...

On-board blade storage conveniently holds blades right where you need them Bevelling Shoe allows you to cut at 0? and 45? angles Automatic dust blower clears cutting area of debris for increased visibility

M42 Bi-metal Band Saw Blade This high-performance saw band is especially suitable for serial cutting of all types of metals. The teeth are made of alloyed high speed stell with 8 % cobalt and 10 % molybdenum. Dimension[mm]: 27*0.9 34*1.1 41*1.3 54*1.6 67*1.6 80*1.6 Tooth ...

Features & Benefits ? Stable and flat plate enables truer run-out for smoother finish and exact dimensions ? No or only little plate distortion after use reduces time for straightening after sharpening ? Durable and corrosion ...

Description M42 Bi-metal is designed to be an all-purpose, high-quality blade. We custom build each blade to have aggressive tooth geometry and a fatigue-resistant backer. By setting the teeth alternately on the left and right side ...

Features & Benefits ?Thin kerf enables a tremendous increase in yield rates ?No or small step at the overlapping area between 2 saw blades due to tight manufacturing tolerances and a very flat and even plate ?All saw blades are ...

Advantages 1.Stable quality 2.High Cutting Efficiency 3.Cost Saving Per Cut Specifications 1.Width: 13mm-67mm 2.Thickness : 0.6mm-1.6mm 3.TPI:3?4?6?8?2/3?3/4?4/6?5/8?6/10?8/12?10/14 etc. 4.Tooth shape: Normal tooth?Protective ...

Features & Benefits ?Reduces friction between the body and the material ?Enables a longer tool life for more machine uptime ?the saw kerf can be reduced or the feed speed increased ?Tough Black is optional for our rip saw ...

Description If you need to cut through large, solid sections of nickel or exotic-based alloys, the Bichamp M51 Bimetal Band Saw Blade is the blade for the job. Its large capacity gullet improves chip carrying capacity, making it a ...

Features & Benefits ?Special tooth shape enables a nearly knife mark free cut finish ?Subsequent sanding or planing can be reduced or eliminated ?Advanced Material Technology reduces residue adhesion enables running consistently ...

Advantages 1.Stable quality 2.High Cutting Efficiency 3.Cost Saving Per Cut Specifications 1.Width: 13mm-67mm 2.Thickness: 0.6mm-1.6mm 3.TPI:3?2/3?3/4?1.4/2.0?1.0/1.25?0.75/1 etc. 4.Tooth shape: Normal tooth?Protective ...

Features & Benefits ?Thin kerf enables a tremendous increase in yield rates ?Less swarf produced ?Runs consistently on cycle times of less than 0.2 sec. ?Thin kerf makes less cutting pressure for very clean cut

Advantages 1.Stable quality 2.High Cutting Efficiency 3.Cost Saving Per Cut Specifications 1.Width: 34mm 2.Thickness : 0.9mm?1.1mm 3.TPI: 1.1?5/8 Description Longer blade life and good performance of cutting various kinds ...

Circular saw blade diameter: 254 mm

Plain Cutting Blade: recommended to cut braided hoses Available diameters: 254mm- 300 mm- 520 mm Serrated Cutting Blade: recommended to cut coated hoses Available diameters: 520 mm Scalloped Cutting Blade: universal solution recommended ...

RUKO T-shank style jig-saw and reciprocating blades have spaced teeth that stops the breaking off of teeth or snapping off the blade. A minimum of 3 teeth should be cutting at once. The work piece?s thickness will determine whether to ...

The HSS Bi-metal is a T-shank style jigsaw and reciprocating blade. Tooth spacing must be observed properly to avoid breakage or snapping of the teeth. To achieve this, at least three teeth must be cutting simultaneously. A tooth spacing ...

This is the bihart cobalt hacksaw blade from HSS. This blade is made from two different types of steel and is thus bimetallic. Hard HSS molybdenum steel makes up the cutting edge and heat treated steel alloy makes up the body of the hacksaw ...