Other tools

The cordless powerhouse with fast accessory changes 3D interface for low-loss power transfer from the tool to the accessory With LED for perfect visibility Snap-in function for tool-free accessory changes in 3 seconds ...

Weight: 15 kg

The Double action hydraulic puncher PRO 110 HP is a portable device with modern design that weights 35 kg. It features a selection of hole diameters (up to 27 mm), intelligent control system (inching and automatic load detection), mode ...

This MINI can notch a 90 degree angle in 4mm mild steel with maximum length of 220mm. The MINI has a large working table with 2 adjustable quick set stops and scales. The blade area is covered with a plexi cover to guard the operator. The ...

Weight: 2.6 kg

Technical Specifications - Basic stainless steel jaws 01 "to 0 4,5”( 24 to 121 mm) - Included stainless steel auxiliary jaws 0 0,25 to 0 4,25” (5 to 108 mm ) - Cutting precision: perpendicular cuts < 0.25 mm - Scalability: ...

Battery model particularly suitable for renovation works and correction of rods protruding from casts. The portable cutting shears are equipped with a portable battery charger. - Total weight 5.6 kg - max cutting capacity diameter 16 ...

Ultrasonic cutting device for handheld straight cutting operations Fabric types - Awnings and interior blind fabrics - Screens - Performance fabrics - Any fusible fabric Applications Handheld cutting operations ...

Chamfering tools: for spur or helical gears, for straight or inclined gear lateral surfaces Deburring tools: - P type (standard tool for straight gear lateral surfaces) - P 1000 type (like P type but grooved) - PR type (with alternate ...

Weight: 2.4 kg

- Basic stainless steel jaws 0 1” to 0 4,5” (24 to 121 mm) - Included stainless steel auxiliary jaws 0 0,25 to 0 4,25” (5 to 108 mm ) - Cutting precision: perpendicular cuts < 0.25 mm - Dual-output cutting motor with ...

Total weight 8 kg - max cutting capacity diameter 16 mm - connection voltage: VOLT 220/50 Hz single-phase - power consumption: 720 W - cutting speed: 2.5 seconds - cutting pressure 13 ton. dimensions: mm 460x270x115

Ultrasonic manual cutting on stenters, inspection and off-line machines Fabric types - PP-Tapes woven fabrics - Sun protection - Home textiles - Filtration fabrics - Coating supports - Geotextiles - ... Applications Manual ...

Weight: 1.7 kg

Used for opening connection holes on ends of aluminum profiles which are cut at 45? so that they can be assembled through these holes. Practical operation Ergonomic design Hardened special cutter set

Weight: 3.5 kg

Technical Specifications - Basic stainless steel jaws 0 2,75” to 0 6,625” (70 to 170 mm) - Included stainless steel auxiliary jaws 0 0,625” to 0 4,65” ( 16 to 118 mm) - Cutting precision: perpendicular cutting ...

Drill diameter: 150 mm

The 874 series is composed of clamping brackets developed by AMF ANDREAS MAIER. They are equipped with a clamping thread in a size of M12 and a grid pitch in a size of 40 mm. In addition, the grid hole of these clamping brackets have ...

Notches 3/4" , 1" and 1-1/4" Schedule 40 Pipe Notches a Series of Diameters without Changing Parts for Each Diameter Offers Efficient and Productive Pipe Notching at a Low Cost Work Piece is Quickly and Accurately Notched to a Proper ...

Product features Light design suitable for all stationary units Suitable up to an engine size of 160L Compact, space-saving design in comparison with the electric engine IMB35 Material aluminium: low weight with ...

If it is not possible to set the countersink correctly, this lever version is recommended.

engraflexx EC Field of application: Deburring of undefined edges on any workpieces with inner or outer contours etc. Tool specifications: Principally used in machining centres (no additional installations required) Direct drive via ...

Features: Clamping thread (M): M12 Grid pitch (R): 40 mm ? 0.01 mm Grid hole (D): ? 16F7 Grid hole (E): 12 mm Perpendicularity: 0.01/200 mm Clamping surface face: smoothed after nitration Hardness: 700-100 HV1 Material: case-hardened ...

Ingersoll Rand's 325B is a heavy-duty Air Nibbler used for sheet metal shops, paint, auto body shops, and tinsmiths operations. It cuts out quarter panels without damaging the edges of the material. Also, it offers excellent and bigger ...

Handoperated tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic fabric, such as cords, ropes, bands and belting fabric. Heat up time of blades approx 6-8 seconds. Heat ...

Weight: 2 kg

The Craftsman Cordless 1/2'' Hammer Drill is an excellent addition to your tool shed, whether you're a dedicated handyman or a weekend do-it-yourselfer. It's powerful, convenient and compact, offering a maximum torque of 410 in/lbs, 1400 ...

Power: 3 kW
Weight: 270 kg

FLASH? electric torque multiplier from Torque Gun Company is the first to comply with the latest directives for noise and vibration. It adheres to all OSHA requirements for tool safety. It provides a torque output of up to 3,000 ft. lbs. ...

Weight: 1.54 kg

Description For quick and clean deburring of tubes, edges and steel plates.

Kati? Blitz compact set - Pulling device for domestic installation The Kati? Blitz was the first device of its kind, with which it was possible to pull cables into conduits even under the most difficult of conditions. Nowadays the Kati? ...

F-1 Series of cutting tools Completely self contained tool with handle Suitable for cutting metal pipe, angle, wire and cable, rope, etc. F-130N blade opening: 5 inches (130mm) F-150N blade opening: 5.8 inches (150mm) F-130N T30 Cut ...

Novatek?s Single Head "1SH" Scaling Hammers are ideal tools to complement our needle scalers in more demanding applications. Designed for steel or concrete surfaces our 1SH scaling hammers provide rapid take-down of concrete, remove ...

AVM Automation Screw Gripper The AVM Automation Screw Gripper has the following features: ? Angular gripper with three fingers, concentric at closing and self - governing at opening ? Single acting pneumatic drive ? Utilized for ...

Since many years, electricians appreciate the reliability and durability of the Kati? Blitz. With it, cable pulling is simple, fast and easy to perform. The Kati? Blitz compact Plus with the new guiding tip Flexi-Sonde is now possible ...

Weight: 2.1 kg

The REMA HOLLAND's MD series cable pullers are very lightweight, and have a compact, rugged design. They are used in various applications with cables, for pulling, dragging and spanning. They feature a safety factor of 4, safety latches ...

Punch smooth, precise holes in seconds; much faster than drilling. ? Fully portable for construction, maintenance and service applications, or can be mounted on a workbench for production jobs. Has carrying handle for precise locating. ? ...

The NOVITA PLUS by Kuris Spezialmaschinen GmbH is an electric fabric cutter which comes with an approximate weight of about 850 g. The unit has a cutting speed of 3,000 rpm which has a cutting height of about 8 mm and cutting diameter ...

The VH2304 is a long vertical holder that is manufactured by MM Engineering. The unit is suitable for mounting a long positioning table, or a lifting table. Its assembly is perpendicular to the mounting surface, e.g. Z-axis. The unit ...

Weight: 14 kg

Rotational speed: 3000 rpm - 8000 rpm

Working length: 512.1 mm - 651.8 mm

Forged, heat-treated jaws for a powerful grip. Heat-treated nickle-chrome pin. Fast opening. Heavy-duty tool for securely tightening pipes in difficult-to-reach locations (water and gas pipes in trenches, pipelines, etc.).

Fagioli operates a range of jacks from 15 to 750 tonnes capacity each based upon lift cables of 1 to 50 strands of 18mm diameter, 7 wire die-compacted, prestressing strand of guaranteed minimum breaking load of 38 tonnes per strand. Jacks ...

60? inside-outside cylinder SP8000 Metal body 90? inside-outside cylinder SP8100 Plastic body Right or left-hand rotation Capacity 4 to 42 mm

Drill diameter: 250 mm

Plate thickness: 0.5 mm - 1.65 mm

Plate thickness: 1.5 mm

Drill diameter: 50 mm - 450 mm

Working length: 50 mm

Metal protective guard plate or polyethylene protecting hilt. The wooden handles ensure a ?rm grip.

Well-proven with compressors, excavators and other construction machines, the application of this material was overdue for Cable Pulling Winches. The longevity of the winch aggregate in combination with this housing makes the winch a ...

The one-step Sonobond Ultrasonic cutting and sealing is perfect for use with trim, ribbons, labels and Velcro. It is available for loom-mounted operations or for use in a hand-held single cut. Sonobond offers ultrasonic bonding equipment ...

The THALER Cable Capstan Winch ? product line 2000 ? is of captivating compact construction. With a standard rope length of 500 m the winch depending on its equipment has a weight of 1150 up to 1300 kg only and can therefore be drawn ...

Working length: 50 mm