Needle valves, piston valves

Operating pressure: 6000 psi

Operating pressure: 205.9 bar
DN: 0.25, 0.38 mm
Flow rate: 21, 2 l/min

Temperature: 240 ?C
Operating pressure: 400 bar
DN: 0.5 in - 1 in

Operating pressure: 260, 420, 110 bar
DN: 4 mm - 15 mm

Pressure reducing valve can prevent pipeline breakage due to high pressure. Pressure reducing valve is installed in water supply pipeline and maintains the setting outlet pressure in main valve, regardless of the different inlet pressure. Pressure ...

Function: 2/2 NO DN & Connection: 10 - 50 [mm] / G3/8 - G2 Operating pressure: max. 16 [Bar] Control pressure: 2 - 6 [Bar] Fluid temperature: -10 to 200 [?C] Materials: stainless steel, gasket - PTFE, FPM Ambient temperature: -10 ...

Temperature: 135 ?C - 180 ?C
Operating pressure: 3.5 bar - 6 bar
DN: 20 mm - 150 mm

Operating pressure: 20 bar - 750 bar
DN: 0.25 in - 0.75 in

An integral one-piece double block and bleed root valve assembly for primary isolation of pressure take-offs, with either threaded or welded inlet connection Suitable for double block and bleed applications on pressure and flow measurement ...

Operating pressure: 4 bar
DN: 0.25 mm

The Fabco-Air gives different kinds of needle and flow control valves needed for pneumatic circuitry. They make sure to meet the standards of their consumer. They have port sizes that ranges from #10-32 thru 1/2 NPT and control in one ...

Non-rotating stem prevents galling and scoring Vee or Regulating tip stem Six body styles for a wide variety of applications Integral through-holes for bracket mounting Panel mounting option is also available Gland locking device prevents ...

There are no less than five high resolution (HR) and two standard resolution (SR) models available for this control valve, so you can choose the one that fits the requirements of your application perfectly. In addition to the smooth liquid ...

1-6330 series THECO are suitable for ON-OFF service in low potentiality processes but under continuous and severe conditions where maintenance must be minimized. These valves are used in tyre, food industry, plastic forming etc. Size: ...

Operating pressure: 70 psi - 100 psi
DN: 0.12 in - 1 in
Flow rate: 20 us gal/min

This pilot integrates all principal functions of a 2-Way control circuit in a single assembly. It is a direct acting pilots valve, actuated by a pressure responsive diaphragm, which tends to reach equilibrium with the set spring force. ...

Temperature: -20 ?C - 100 ?C
Operating pressure: 15 bar - 300 bar

Temperature: -10 ?C - 184 ?C
Operating pressure: 0 bar - 16 bar
DN: 0.32 in - 2.5 in

DELO-DOT PN3 micro dispensing valve has one major advantage over other valves: contact-less dispensing. Our system for micro dispensing, therefore, prevents a collision of jet dispensing valve and component successfully. While in operation, ...

The Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also.) The superior design of the piston is unique to the market, enabling the plug to retract ...

RF series relief valve is designed on the theory of differential pressure created by flow across the orifice of the balance piston. This differential pressure acts to open the piston against the spring, permitting enough fluid vented ...

Reputable international commercial vehicle manufacturers have relied on co-operation with IMI Precision Engineering for more than 40 years. The group of companies offers a wide range of different solutions for the commercial vehicle sector, ...

Temperature: -20 ?C - 100 ?C
Operating pressure: 15 bar - 250 bar

The 483 series, which are manufactured by Sferaco, are flange gate valves. It is ideal to be used in applications that deal with steam, high pressures, and in the petroleum industry. It is capable of handling pressure of up to 200 bars ...

Temperature: -10 ?C - 184 ?C
Operating pressure: 0 bar - 16 bar
DN: 0.5 in - 2 in

Temperature: -50 ?C - 230 ?C
Operating pressure: 6000 psi
DN: 0.25 in - 1 in

1/4 x 1/8 and 1/4 x 1/4 in. (10 x 8 and 10 x 10mm) Description: Tube to male pipe straight needle valves

Temperature: 90 ?C
Operating pressure: 0 bar - 25 bar

Temperature: -51 ?C - 316 ?C
Operating pressure: 3000, 5000, 6000 psi
DN: 0.5, 0.25, 0.38 in

The 3000 Psi type monobloc valve is made of carbon steel, with a reduced bore and a rising rotating system. It operates with minimum and maximum temperatures of -20?C to +250?C, respectively, with a maximum pressure of 200 bars at 20?C. ...

Temperature: -10 ?C - 180 ?C
Operating pressure: 0 bar - 16 bar
DN: 25 mm - 50 mm

Application: For control and shut off of various gases and liquids in compressed air ducts, natural gas, sampling lines, control panels. Ideal in laboratories for fine contol Key Advantages: Premium quality for dependable service ...

DN: 20 mm

Anti Blow-out stem Low operating torques Panel mountable Variety of stem tips Bar Stock Body in Straight flow pattern Every valve is tested at the factory SPECIFICATIONS Pressure rating : upto 6000 psig (408bar) Temperature rating ...

The piston can be easily removed from the valve housing, for full cleaning.

DN: 0.12 in - 1 in

DN: 0.25 in - 1 in

Temperature: 0 ?C - 80 ?C
Operating pressure: 25 bar
DN: 15 mm - 100 mm

The Sferaco 481 series is an array of 1-pc needle valves constructed in a stainless steel framework. They integrate a rising rotating stem with minimal bore and can exhibit a nominal pressure of 400 bar in respect with the flow direction ...

Temperature: -10 ?C - 180 ?C
Operating pressure: 0 bar - 16 bar
DN: 10 mm - 65 mm

Aluminum alloy air admittance valves (also called vent valves). Both have a control knob attached to a screw-actuated plunger sealed by a nitrile o-ring onto a seat in the valve body AV10K Mounts on a pipeline with a KF10 flange (supplied ...

Temperature: 90 ?C - 180 ?C
Operating pressure: 10 bar
DN: 0.12 in - 0.5 in

Temperature: 300 ?C
Operating pressure: 10 bar - 16 bar

Temperature: -10 ?C - 180 ?C
Operating pressure: 0 bar - 16 bar
DN: 25 mm - 50 mm

Operating pressure: 3000 psi
DN: 0.25 in - 0.75 in

Operating pressure: 0 bar - 420 bar
Flow rate: 530 l/min

Temperature: 65 ?C
Operating pressure: 10 bar
DN: 15 mm - 250 mm

DN: 12 mm - 200 mm

Temperature: 400 ?C
Operating pressure: 82 bar - 136 bar

This water distribution equipment can handle a minimum temperature of -20?C and maximum temperature of 180?C. This threaded female BSP cylindrical equipment is made with a S.S. ASTM A351 CF8M body. It can handle a maximum water-pressure ...

The 190xx Series features plunger valves designed in different models ideal for application in vacuum pumps. These valves are built with a cylindrical brass body, and a steel plunger equipped with a conical valve and a thrust spring. ...

Needle Valves are used to reduce the rate of flow in a leg of a pneumatic circuit, consequently slowing actuator speed. Unlike a Flow Control, a Needle Valve controls flow in both directions (bi-directional). A finely threaded stem ...

The Eclipse ALO-R valve is a needle and seat-type model that is designed for accurate flow adjustment of gas in feeding nozzle mix burners. This is especially needed for gas flow controls to provide required air/gas ratios. These valves ...

Leakage Butterfly Valve with pneum. Auxiliary Valves and Actuator VMove 1 AWH butterfly valve technology has produced another innovation: the leakage butterfly valve with pneumatic auxiliary valves. It is designed for reliable separation ...

Armstrong Piston Valves are full port forged steel isolation valves with a maximum operating pressure of 136 Barg/1973 psig and a maximum operating temperature of 427?C/800?F. The burnished piston and metal reinforced graphite rings provide ...

A high-performance micro-valve ideal for handling gas analysis and control equipment, fluid precision control, etc. Micro flow rates can be adjusted with high resolution and reproducibility. Features ?Wide adjustable range The adjustable ...

DN: 10 mm - 200 mm

Temperature: 120 ?C
Operating pressure: 125 bar
DN: 8 mm - 15 mm

Operating pressure: 2.5 bar