Machine safety devices

Squeeze-grip cpf valve in front-outlet version, with bursting-disc type safety device 1370

The Pneumatic High-Angle Ultimatic? Collision Sensor maximizes uptime and, with a repeatability of 0.0005" (0.013mm), ensures that the final output still meets your exacting product quality standards - even after a crash. The Pneumatic ...

Mayser Miniature Safety Edges were specially developed for areas where only extremely short overtravel distances and minimum installation heights are possible. One classic example of their use is as Anti Pinch Sensors on pinching and ...

The BTE08.10 is a single-pole, manually operated device with a blocking electro-magnet interlocked with the pantograph down position. The interlocking is made by a key that can be released once the BTE08.10 is in the grounding position. ...

Mayser Safety Mats or Safety Steps are protective devices for making surface area danger zones safe from the danger of pinching. Depending on the switching principle, they are offered as a normally closed contact or a break contact. The ...

Wireless emergency stop 4 function buttons + start/stop Light-weight, compact and ergonomic transmitters IP65 tightness, protective foams Integrated rechargeable battery Transmitter support charger Wireless emergency stop with safety ...

Wireless validation, enabling, dead man handle 4 function buttons + start/stop Light-weight, compact and ergonomic transmitters Screen for parameters setting, selection, validation, look-up IP65 tightness, protective foams Integrated ...

Safety Catchers are used where personal protection and accident prevention must be provided against failure of lifting members in an area where loads or tools are raised. Protection, for example, if a hydraulic or pneumatic pressure system ...

Safety Catchers are used where personal protection and accident prevention must be provided against failure of lifting members in an area where loads or tools are raised. Protection, for example, if a hydraulic or pneumatic pressure system ...

Safety Catchers are used where personal protection and accident prevention must be provided against failure of lifting members in an area where loads or tools are raised. Protection, for example, if a hydraulic or pneumatic pressure system ...

Safety Catchers are used where personal protection and accident prevention must be provided against failure of lifting members in an area where loads or tools are raised. Protection, for example, if a hydraulic or pneumatic pressure system ...

Arc sensor The CLOOS arc sensor uses the arc to measure the joint position of the workpiece. As the arc sensor enables measurement and welding to be carried out simultaneously, the cycle times are not influenced. At the same time workpiece ...

Length: 500 mm
Width: 80 mm
Height: 15 mm

Length: 500 mm - 1800 mm
Width: 1000, 500, 750 mm

Gasboard?8010 can work independently or apply in combination with opacity meter, exhaust gas analyzer or others. It adopts advanced DSP technology together with signal spectrum analysis approach to detect rpm. This instrument is high-precision, ...

CE-L42-J9 is a four- channel digital inductive loop vehicle detector. It is used to identify the presence of vehicle and measure whether the vehicles pass or not by means of four inductive loops buried under the road. It is applied to ...

The safety contact edges SENTIR edge of the ASO GE-series are highly flexible profiles to be adapted to doors and equipment in an optimum manner. They are part of a world-wide patented system which is suited for rapid and comfortable self-assembly.