1. Home
  2. Power Transmission - Mechanical components
  3. Bearings and Linear Guides
  4. Linear guides
  5. track linear guide unit / for cylinders / aluminum / pneumatic
Track Linear Guide Unit / For Cylinders / Aluminum / Pneumatic

track linear guide unit / for cylinders / aluminum / pneumatic

DS-DH-DM series

Vnation JSC

track linear guide unit / for cylinders / aluminum / pneumatic
Contact us for advice solutions and equipment provider
captcha contact product

  • Technology:

    track

  • Other characteristics:

    for cylinders, aluminum, pneumatic

  • Rail length:

    Min.: 50 mm

    Max.: 500 mm

For optimal alignment and anti-rotational efficiency, the guided units series of DS-DH-DM is the ultimate solution. It has a beneficial effect over the pneumatic cylinder that remains connected to it. These guide units can be used in combination or in isolation for better handling of complete units.

These guide units can also be coupled with the aid of type A and C anchorage and with ISO 6432 cylinders. It is easily available in the versions of U PROFILE (for constrained loads and speeds); H PROFILE (for higher loads); and H PROFILE (for optimal speeds).

Để lại bình luận

View catalogue Go to the METAL WORK website for more information
Products relative
Ball bearings
ball bearing / thin-section / deep groove / steel

ball bearing / thin-section / deep groove / steel

Inside diameter: 3 mm - 160 mm
Outside diameter: 7 mm - 250 mm
ball bearing / radial / polymer / stainless steel

ball bearing / radial / polymer / stainless steel

xiros® B180
Inside diameter: 2 in
Outside diameter: 0.5 in
ball bearing / double-row / stainless steel / custom

ball bearing / double-row / stainless steel / custom

xiros® B180 series
Inside diameter: 42 mm
Outside diameter: 20 mm
ball bearing / single-row / urethane / light-duty

ball bearing / single-row / urethane / light-duty

NF, RIF, RF series
ball bearing / double-row / steel / precision

ball bearing / double-row / steel / precision

MM, MMV, MMX, HX series
Inside diameter: 30 mm - 100 mm
Outside diameter: 55 mm - 180 mm
Width: 13 mm - 28 mm
ball bearing / cylindrical roller / single-row / axial

ball bearing / cylindrical roller / single-row / axial

N, RIN, RN series
Outside diameter: 80 mm - 2000 mm
ball bearing / cylindrical roller / single-row / radial

ball bearing / cylindrical roller / single-row / radial

NJ, RIJ, RJ
Outside diameter: 80 mm - 2000 mm
ball bearing / angular-contact / high-speed / high-precision

ball bearing / angular-contact / high-speed / high-precision

RS series
... Bearings also operate under high acceleration conditions. note: dn = bearing bore diameter in mm x rotational speed in rpm. dmn = bearing ball PCD in mm x ...
Roller bearings
spherical roller bearing / single-row

spherical roller bearing / single-row

NP, RIT, RT series
Inside diameter: 35 mm
Outside diameter: 80, 72 mm
cylindrical roller bearing / single-row / axial / radial

cylindrical roller bearing / single-row / axial / radial

RIU, RU series
Outside diameter: 80 mm - 2000 mm
ball bearing / cylindrical roller / single-row / axial

ball bearing / cylindrical roller / single-row / axial

N, RIN, RN series
Outside diameter: 80 mm - 2000 mm
ball bearing / cylindrical roller / single-row / radial

ball bearing / cylindrical roller / single-row / radial

NJ, RIJ, RJ
Outside diameter: 80 mm - 2000 mm
roller bearing / axial / radial / stainless steel

roller bearing / axial / radial / stainless steel

NP, RIT, RT series
Winkel bearings are designed for linear applications with a combined high radial and axial load. Lubricated linear bearings providing long service intervals. Reduced design time and component cost. High specification ?U? or ?I? beam ...
spherical roller bearing / double-row

spherical roller bearing / double-row

BXRO series
Inside diameter: 35 mm
Outside diameter: 72 mm
cylindrical roller bearing / radial / with cage

cylindrical roller bearing / radial / with cage

BXRT series
Inside diameter: 15, 710 mm
cylindrical roller bearing / single-row / low-friction

cylindrical roller bearing / single-row / low-friction

BXRT series
Inside diameter: 15 mm
Outside diameter: 710 mm
Needle bearings
needle cage

needle cage

ID : 3 - 110 mm, OD : 5 - 117 mm
Schaeffler needle roller and cage assemblies are single or double row units that include cages and needle rollers. The radial section of the assemblies is smaller than the diameter of the needle rollers. This enables the needle roller ...
drawn cup needle roller bearing

drawn cup needle roller bearing

ID : 3 - 210 mm, OD : 6.5 - 240 mm
Drawn cup needle roller bearings with a closed end open ends are components containing thin-walled drawn external rings and needle roller and lock in assemblies. Drawn cup need roller bearings with open ends come with complete complement ...
needle bearing / double-row / with ribs

needle bearing / double-row / with ribs

ID : 3 - 210 mm, OD : 6.5 - 240 mm
Inside diameter: 415, 5 mm
needle bearing / double-row

needle bearing / double-row

ID : 3 - 210 mm, OD : 6.5 - 240 mm
Inside diameter: 5, 415 mm
needle bearing / single-row / self-aligning

needle bearing / single-row / self-aligning

ID : 3 - 210 mm, OD : 6.5 - 240 mm
Inside diameter: 45, 12 mm
needle bearing / radial / steel / machined-ring

needle bearing / radial / steel / machined-ring

ID : 3 - 210 mm, OD : 6.5 - 240 mm
Inside diameter: 1200 mm
roller bearing / needle / radial / steel

roller bearing / needle / radial / steel

ID : 3 - 210 mm, OD : 6.5 - 240 mm
Since a needle bearing can only support pure radial or axial loads, it is necessary, when both radial and axial forces are present, to combine one needle bearing with one thrust needle or roller bearing, or in some cases even a thrust ...
automobile wheel bearing kit

automobile wheel bearing kit

MileMate™, 454 series
Timken? MileMate? Matched Wheel Bearing Sets are the original wheel bearing sets that are designed with the purpose of keeping trucks moving. Our 44 cup and cone sets are designed in such a way that they give superior results with reduced ...
Partners