ball guide unit / micro-cylinders

Inside diameter: 2 in
Outside diameter: 0.5 in

Inside diameter: 42 mm
Outside diameter: 20 mm

Inside diameter: 30 mm - 100 mm
Outside diameter: 55 mm - 180 mm
Width: 13 mm - 28 mm

Outside diameter: 80 mm - 2000 mm

Outside diameter: 80 mm - 2000 mm

... Bearings also operate under high acceleration conditions. note: dn = bearing bore diameter in mm x rotational speed in rpm. dmn = bearing ball PCD in mm x ...

Inside diameter: 35 mm
Outside diameter: 80, 72 mm

Outside diameter: 80 mm - 2000 mm

Outside diameter: 80 mm - 2000 mm

Outside diameter: 80 mm - 2000 mm

Winkel bearings are designed for linear applications with a combined high radial and axial load. Lubricated linear bearings providing long service intervals. Reduced design time and component cost. High specification ?U? or ?I? beam ...

Inside diameter: 35 mm
Outside diameter: 72 mm

Inside diameter: 15, 710 mm

Inside diameter: 15 mm
Outside diameter: 710 mm

Schaeffler needle roller and cage assemblies are single or double row units that include cages and needle rollers. The radial section of the assemblies is smaller than the diameter of the needle rollers. This enables the needle roller ...

Drawn cup needle roller bearings with a closed end open ends are components containing thin-walled drawn external rings and needle roller and lock in assemblies. Drawn cup need roller bearings with open ends come with complete complement ...

Inside diameter: 415, 5 mm

Inside diameter: 5, 415 mm

Inside diameter: 45, 12 mm

Inside diameter: 1200 mm

Since a needle bearing can only support pure radial or axial loads, it is necessary, when both radial and axial forces are present, to combine one needle bearing with one thrust needle or roller bearing, or in some cases even a thrust ...

Timken? MileMate? Matched Wheel Bearing Sets are the original wheel bearing sets that are designed with the purpose of keeping trucks moving. Our 44 cup and cone sets are designed in such a way that they give superior results with reduced ...