Air Cooler / For Electrical Cabinets / IP54 / Stainless Steel

air cooler / for electrical cabinets / IP54 / stainless steel

Nex Flow™ 600xxA series

air cooler / for electrical cabinets / IP54 / stainless steel

Contact us for advice solutions and equipment provider

Material:

air
Applications:

for electrical cabinets
Other characteristics:

IP54, stainless steel, compact, vortex tube

Power:

Min.: 85 W (290.03 BTU/h)

Max.: 849 W (2896.9 BTU/h)
Flow rate:

Min.: 113 l/min (29.85 us gal/min)

Max.: 850 l/min (224.55 us gal/min)

NEMA 12 Cabinet Panel Cooler for electronic control panels for general use in industrial environments where no direct liquid spray is applied to the unit. Stainless steel construction to hold up in corrosive environments.

The NEMA 12 Cabinet Panel Cooler provides a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air

Unlike many of our competitors all of our Frigid-X? NEMA 12 Cabinet Panel Coolers are stainless steel, not just the vortex tube, for longer life and flexible use. Frigid-X? NEMA 12 Cabinet Panel Cooler is compact and can be installed in minutes through a standard electrical knockout. There are virtually no moving parts.

Để lại bình luận

Go to the Nex Flow Air Products Corp. website for more information

Products relative

Plate heat exchangers

shell and tube heat exchanger / stainless steel / steel / industrial

shell and tube heat exchanger / stainless steel / steel / industrial

The Model IVL from ATTSU is engineered with carbon or stainless steel materials that are ideal for industrial use. It is capable of powering up to 15,000 kcal/h within its compact design delivering optimal efficiency with its high heat ...

gasketed-plate heat exchanger / liquid/liquid / stainless steel / titanium

gasketed-plate heat exchanger / liquid/liquid / stainless steel / titanium

Operating pressure: 10 bar
Temperature: 100 ?C
Power: 2000 W - 900000 W

shell and tube heat exchanger / liquid/liquid / stainless steel / titanium

shell and tube heat exchanger / liquid/liquid / stainless steel / titanium

Operating pressure: 100 bar
Temperature: -195 ?C - 900 ?C

spiral heat exchanger / liquid/liquid / gas/liquid / stainless steel

spiral heat exchanger / liquid/liquid / gas/liquid / stainless steel

Operating pressure: 60 bar
Temperature: -100 ?C - 450 ?C

plate heat exchanger / liquid/liquid / titanium / steel

plate heat exchanger / liquid/liquid / titanium / steel

Temperature: 177 ?C

welded plate heat exchanger / liquid/liquid / stainless steel / titanium

welded plate heat exchanger / liquid/liquid / stainless steel / titanium

SmartBLOCK/ASME Certificate/Fully welded heat exchanger

... that the heat transfer plates, frame columns and cover panels are bolted into a plate bank assembly, this assembly is bolted with the rigid rectangle ...

shell and tube heat exchanger / liquid/liquid / sanitary / compact

shell and tube heat exchanger / liquid/liquid / sanitary / compact

The Turflow is a compact, corrugated tube heat exchanger suitable for a range of flow media - particularly well suited to fluids with lower viscosity such as juices, glycol, light solutions, CIP and suspensions containing small particles. ...

tubular heat exchanger / plate / liquid/liquid / sterile

tubular heat exchanger / plate / liquid/liquid / sterile

This unit is a Heat Transfer Solution designed to permit heat to go to a primary heat source transforming to a secondary fluid even without having a contact. The whole operation features ...

Shell-and-tube heat exchangers

shell and tube heat exchanger / stainless steel / steel / industrial

shell and tube heat exchanger / stainless steel / steel / industrial

The Model IVL from ATTSU is engineered with carbon or stainless steel materials that are ideal for industrial use. It is capable of powering up to 15,000 kcal/h within its compact design delivering optimal efficiency with its high heat ...

tubular heat exchanger / for thermal fluid boilers

tubular heat exchanger / for thermal fluid boilers

The IAL model is a heat exchanger that can be utilized for lubricating circuits through the use of thermal oil as primary and vegetable oil as secondary. This compact equipment has the capability to operate both horizontally and vertically. ...

shell and tube heat exchanger / liquid/liquid / stainless steel / titanium

shell and tube heat exchanger / liquid/liquid / stainless steel / titanium

Operating pressure: 40 bar
Temperature: 300 ?C
Power: 20000000 W

shell and tube heat exchanger / liquid/liquid / sanitary / compact

shell and tube heat exchanger / liquid/liquid / sanitary / compact

The Turflow is a compact, corrugated tube heat exchanger suitable for a range of flow media - particularly well suited to fluids with lower viscosity such as juices, glycol, light solutions, CIP and suspensions containing small particles. ...

tubular heat exchanger / plate / liquid/liquid / sterile

tubular heat exchanger / plate / liquid/liquid / sterile

This unit is a Heat Transfer Solution designed to permit heat to go to a primary heat source transforming to a secondary fluid even without having a contact. The whole operation features its secure, reliable and aseptic operations which ...

tubular heat exchanger / water/oil

tubular heat exchanger / water/oil

They have the same features as the exchangers of the series MS 84 B and MS 134 P. They are applied inside the oil tank by means of a flange, welded on the exchanger, which must interface with a counter-flange, welded on the tank wall. These ...

tube-tube heat exchanger / liquid/liquid

tube-tube heat exchanger / liquid/liquid

Operating pressure: 10 bar
Temperature: 110 ?C

tubular heat exchanger / liquid/liquid / for the plastics industry / for the food industry

tubular heat exchanger / liquid/liquid / for the plastics industry / for the food industry

Kenics? Static Mixer technology, available exclusively in Kenics? Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including ...

Other fluid-fluid heat exchangers

tubular heat exchanger / for thermal fluid boilers

tubular heat exchanger / for thermal fluid boilers

The IAL model is a heat exchanger that can be utilized for lubricating circuits through the use of thermal oil as primary and vegetable oil as secondary. This compact equipment has the capability to operate both horizontally and vertically. ...

gasketed-plate heat exchanger / liquid/liquid / stainless steel / titanium

gasketed-plate heat exchanger / liquid/liquid / stainless steel / titanium

Operating pressure: 10 bar
Temperature: 100 ?C
Power: 2000 W - 900000 W

shell and tube heat exchanger / liquid/liquid / stainless steel / titanium

shell and tube heat exchanger / liquid/liquid / stainless steel / titanium

Operating pressure: 40 bar
Temperature: 300 ?C
Power: 20000000 W

spiral heat exchanger / liquid/liquid / gas/liquid / stainless steel

spiral heat exchanger / liquid/liquid / gas/liquid / stainless steel

Operating pressure: 60 bar
Temperature: -100 ?C - 450 ?C

plate heat exchanger / liquid/liquid / titanium / steel

plate heat exchanger / liquid/liquid / titanium / steel

Temperature: 177 ?C

welded plate heat exchanger / liquid/liquid / stainless steel / titanium

welded plate heat exchanger / liquid/liquid / stainless steel / titanium

SmartBLOCK/ASME Certificate/Fully welded heat exchanger

SmartBLOCK is a welded plate type heat exchanger that can be opened at both sides and designed without any seal gaskets installed between heat transfer plates, it can provide large heat transfer area within a compact space, and can be ...

heat pipe heat exchanger / for furnace and oven / industrial / for thermal fluid boilers

heat pipe heat exchanger / for furnace and oven / industrial / for thermal fluid boilers

Energy recovery from industrial exhaust gases has the potential to unlock large amounts of valuable energy savings and reduce CO2 and carbon emissions. However, in the past this opportunity has largely gone unexploited due to the hostile ...

shell and tube heat exchanger / liquid/liquid / sanitary / compact

shell and tube heat exchanger / liquid/liquid / sanitary / compact

The Turflow is a compact, corrugated tube heat exchanger suitable for a range of flow media - particularly well suited to fluids with lower viscosity such as juices, glycol, light solutions, CIP and suspensions containing small particles. ...