heat recovery system / energy / for the food industry

Operating pressure: 10 bar
Temperature: 100 ?C
Power: 2000 W - 900000 W

Operating pressure: 100 bar
Temperature: -195 ?C - 900 ?C

Operating pressure: 60 bar
Temperature: -100 ?C - 450 ?C

Temperature: 177 ?C

... that the heat transfer plates, frame columns and cover panels are bolted into a plate bank assembly, this assembly is bolted with the rigid rectangle ...

The Turflow is a compact, corrugated tube heat exchanger suitable for a range of flow media - particularly well suited to fluids with lower viscosity such as juices, glycol, light solutions, CIP and suspensions containing small particles. ...

This unit is a Heat Transfer Solution designed to permit heat to go to a primary heat source transforming to a secondary fluid even without having a contact. The whole operation features ...

The Model IVL from ATTSU is engineered with carbon or stainless steel materials that are ideal for industrial use. It is capable of powering up to 15,000 kcal/h within its compact design delivering optimal efficiency with its high heat ...

The IAL model is a heat exchanger that can be utilized for lubricating circuits through the use of thermal oil as primary and vegetable oil as secondary. This compact equipment has the capability to operate both horizontally and vertically. ...

Operating pressure: 40 bar
Temperature: 300 ?C
Power: 20000000 W

The Turflow is a compact, corrugated tube heat exchanger suitable for a range of flow media - particularly well suited to fluids with lower viscosity such as juices, glycol, light solutions, CIP and suspensions containing small particles. ...

This unit is a Heat Transfer Solution designed to permit heat to go to a primary heat source transforming to a secondary fluid even without having a contact. The whole operation features its secure, reliable and aseptic operations which ...

They have the same features as the exchangers of the series MS 84 B and MS 134 P. They are applied inside the oil tank by means of a flange, welded on the exchanger, which must interface with a counter-flange, welded on the tank wall. These ...

Operating pressure: 10 bar
Temperature: 110 ?C

Kenics? Static Mixer technology, available exclusively in Kenics? Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including ...

The IAL model is a heat exchanger that can be utilized for lubricating circuits through the use of thermal oil as primary and vegetable oil as secondary. This compact equipment has the capability to operate both horizontally and vertically. ...

Operating pressure: 10 bar
Temperature: 100 ?C
Power: 2000 W - 900000 W

Operating pressure: 40 bar
Temperature: 300 ?C
Power: 20000000 W

Operating pressure: 60 bar
Temperature: -100 ?C - 450 ?C

Temperature: 177 ?C

SmartBLOCK is a welded plate type heat exchanger that can be opened at both sides and designed without any seal gaskets installed between heat transfer plates, it can provide large heat transfer area within a compact space, and can be ...

Energy recovery from industrial exhaust gases has the potential to unlock large amounts of valuable energy savings and reduce CO2 and carbon emissions. However, in the past this opportunity has largely gone unexploited due to the hostile ...

The Turflow is a compact, corrugated tube heat exchanger suitable for a range of flow media - particularly well suited to fluids with lower viscosity such as juices, glycol, light solutions, CIP and suspensions containing small particles. ...