elastomer hose / for pharmaceutical applications / PTFE inner liner
ELAPHARM
Vnation JSC

-
Applications:
for pharmaceutical applications
-
Material:
elastomer
-
Other characteristics:
PTFE inner liner
-
Inner diameter:
Min.: 13 mm
Max.: 50 mm
-
Outer diameter:
Min.: 23 mm
Max.: 66 mm
-
Pressure:
16 Pa (0 psi)
-
Temperature:
150 ?C (302 ?F)
ELAPHARM hose assemblies to DIN 26055-3, for use in the pharmaceutical and biotech industries. Your benefit completely smooth Teflon? PTFE lining. Flexible and homogeneous, kinking-resistant hose construction ( all layers including the lining are permanently bonded to each other ). Supplied as complete hose assembly.
Sizes: DN 13 - 50 mm. Available from 2013 on. Distribution usually by authorized distributors, agents and subsidiaries. OEMs are supplied directly by ELAFLEX.
Type ELAPHARM 'OHM'
Electrically conductive. According to DIN 26055-3 Typ B.
Type ELAPHARM 'I'
Electrically isolating. According to DIN 26055-3 Typ A.
Crimping fo coupling 'free of dead spaces / beaded'
With beaded ( flared out ) PTFE lining. Totally free of dead volume, for highest requirements to media purity. Suitable for both ELAPHARM hose types. Usually used with DIN 32676 ( Triclamp ) or flanged hose couplings.
Crimping of coupling 'gap minimised'
With flush-mounted hose tail. No obstruction of inner cross-section, almost no gap or dead volume between lining and hose tail. For high requirements
to media purity. Suitable for both ELAPHARM hose types. Suitable for all
coupling types.