grease pump / oil / pneumatic / centrifugal

Specifications:
- Compression ratio: 50:1 10:1
- Working pressure: Min 2bar ( 0,2MPa) - Max 10bar (1 MPa)
- Recommended pressure: 6 bar ( 88.2psi)
- Lubricant outlet: 1/4" BSP
- Air inlet: 1/4" UNI-ISO 228
- Lubricant: NLGI 2 Max at the operating temperature
- Electric minimum level: 15?-250 Vac Max

The pneumatic grease pump is an assembly consisting of a cam pneumatic motor connected to a piston-pump located at the bottom of the suction unit. This equipment is required in all working conditions where grease needs to be pumped under pressure (such as bearings, hubs, pins, fittings, etc.).