needle valve / flow-control / bidirectional / unidirectional

This series of valves uses unidirectional and bidirectional controls and has a needle type construction. This uses stainless steel bodies with 1/8, 1/4, 3/8 and 1/2 OT measurements and NBR seals. The mounting is done through a male thread connection, while this can be installed in any position.
This series operates from 0 to 80 degrees Celsius or at 20 degrees Celsius with dry air. The product withstands 1-10 bars of pressure but 6 bars is the nominal pressure value. This has a filtered air setting and the nominal diameter canl go from 1.5 mm (M5) through to 12 mm(G1/8), 4 mm (G1/4), 7mm (G3/8) to 12 mm(G1/2) depending on the type of valve.