waste crusher-shredder

Areas of Application:

The shearing ledge shredder, type PUMA is used in recycling operations for the production of valuable secondary raw materials. The feed material should be available in pieces in order to be metered into the machine. To the PUMA it does not make any difference whether or not it is fed with rubber parts or plastic containers. It likes used plastic film waste and packaging material, just as much as scrap paper, cardboard container and carbon fiber waste. Anywhere where roughest conditions exist and where reliability is required, the PUMA is found in action.

Method of Operation:

The shearing ledge shredder type PUMA size reduces all cuttable material to a particle size smaller than 10 mm or coarser when required. Material is normally fed by means of a conveyor belt or vibratory feeder across the entire width of the machine. Rotating shearing elements work in combination with stationary shearing ledges to size reduce the feed material.
In the lower part of the housing, a well dimensioned screen is installed, which retains the cut material in the cutter chamber until it is discharged through the screen holes. The material is then discharged straight down and transported mechanically away from the machine. The installation of an auxiliary exhaust system is recommended in most cases.