1. Home
  2. Detection - Measurement
  3. Electrical Measurement
  4. Electronic loads
  5. test load / battery
Test Load / Battery

test load / battery

50 µm, 0.5 mg Pt /cm², 70 % Pt/C

Vnation JSC

test load / battery
Contact us for advice solutions and equipment provider
captcha contact product

  • Options:

    battery

The air-breathing FC test cell is designed with a membrane thickness of 50 ?m. It has an operation catalyst of 70% Pt/C and a catalyst loading of 0.5 mg pt/cm? for both cathode and anode aspect. It works with an active surface of 25 cm? and cannot be detached once mounted.

Để lại bình luận

Products relative
Voltage measuring devices
high-voltage detector / silicon / electronic

high-voltage detector / silicon / electronic

BD series
The ROHM voltage detector IC series are reset IC with highly accurate detection voltage of ?1% , low current consumption, small thin packages and wide range of detection voltage. They can be used for every kind of application equipped ...
energy measuring device / voltage / power / with TFT screen

energy measuring device / voltage / power / with TFT screen

SIRAX MM1200
? Clear and unambiguous indication of measured values on TFT display ? Easy operation and parameterisation via touchscreen or via CB-Configurator Software ? Automatic cyclical scrolling of measured data ? Integrated active and reactive ...
high-voltage probe

high-voltage probe

SHT 40 kV
The Chauvin Arnoux SHT40kV is a hand held high voltage probe. The SHT40kV probe is designed to measure voltages referenced to earth, 40 kVDC or peak and up to 28 kVAC (50/60 Hz) and suitable to be used with any existing multi-meter. ...
voltage detector

voltage detector

600 V, CAT IV | C.A 740N, C.A 760N
Chauvin Arnoux test measurement voltage absence testers (VATs) C.A 740N and C.A 760N check for the absence of voltage in compliance with Edition 2 of the IEC 61243-3 standard workplace legislation on the protection and safety of electrical ...
step and contact voltage measurement device

step and contact voltage measurement device

HT2055
The HT2055, generally composed of a station and a meter-designed model, is generally designed to perform step-contact voltage measurements on electrical installations involving HV power station (TN system, electrical substation) with ...
AC voltage detector

AC voltage detector

100 - 1000 V | HT20s
The HT20 is a pen voltage detector engineered by HT Instruments. It is constructed in compliance to IEC/EN61010-1 safety standard in CAT IV 1000V. The device detects AC voltage from 100V to 1000V, at an operating frequency rate of ...
voltage detector / non-contact / with working light

voltage detector / non-contact / with working light

FLIR VP52
The FLIR VP52 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP52 to ...
medium-voltage detector

medium-voltage detector

FLIR VP52
In just one or two seconds, an operator can find out whether if it is secure to work around regions such as: transformer gear and circuit splitter housings, power ground wires or freshly-driven earth rods transportable dwellings, metal ...
Current measuring devices
closed-loop current sensor / AC

closed-loop current sensor / AC

AMS14 series
Current: 200, 100 A
digital clamp ammeter / portable / with power quality and harmonic analyzer / voltage

digital clamp ammeter / portable / with power quality and harmonic analyzer / voltage

HT9020
Current: 1000 A
digital clamp ammeter / portable / Bluetooth / with power quality and harmonic analyzer

digital clamp ammeter / portable / Bluetooth / with power quality and harmonic analyzer

HT9022
Voltage: 0 V - 1000 V
Current: 0 mA - 1000 mA
digital clamp ammeter / portable / AC / voltage

digital clamp ammeter / portable / AC / voltage

max. 600 A | HT4010
Voltage: 0 V - 600 V
Current: 0 A - 6000 A
open-loop Hall effect current sensor / board-mount / solid-core

open-loop Hall effect current sensor / board-mount / solid-core

CSNB,CSNA,CSNC,CSNE,CSNF,CSNG,CSNJ,CSNK,CSNL,CSNM,CSNX
The open loop current sensors is capable to provide output voltage proportional to measured current without using any feedback control. The compact size device with low power consumption are suitable for battery powered circuits. the ...
digital clamp ammeter / portable / current / leakage

digital clamp ammeter / portable / current / leakage

30031A/30032A
Current: 3 mA - 60 mA
closed-loop Hall effect current sensor

closed-loop Hall effect current sensor

CSNB,CSNA,CSNC,CSNE,CSNF,CSNG,CSNJ,CSNK,CSNL,CSNM,CSNX
The CSN Series of closed loop current sensors are based on the principles of the Magnetoresistive or Hall effects, and the null balance or zero magnetic flux method (feedback system). The magnetic flux in the sensor core is constantly ...
digital clamp ammeter / portable / voltage / current

digital clamp ammeter / portable / voltage / current

max. 400 A AC | HT4012
Current: 0 A - 400 A
Power measuring devices
carbon analyzer / power quality / power / portable

carbon analyzer / power quality / power / portable

MAVOWATT 20
The Energy Platform is an innovative and essential tool for any electrical energy monitoring application. Whether you want to understand your utility costs, improve efficiency, install energy savings devices, explore alternative energy ...
analyzer / communication network / power / portable / wireless

analyzer / communication network / power / portable / wireless

AirCheck®
The AirCheck Wi-Fi tester allows network technicians to quickly verify and troubleshoot 802.11 a/b/g/n networks. It is designed for dispatched troubleshooting and simplifies wireless testing by offering a one-button AutoTest, which quickly ...
electric energy meter / DIN rail / single-phase / three-phase

electric energy meter / DIN rail / single-phase / three-phase

7E series
Current: 25, 32, 65, 6 A
Voltage: 230, 400 V
electric energy meter / DIN rail / three-phase

electric energy meter / DIN rail / three-phase

CDT Enerdis
The CDTs by Enerdis is considered one of the best because it is very convenient and flexible. It allows the consumer to read the data remotely using the WinThor software and this advanced software is also used to supervise and manage ...
electric energy meter / wall-mounted / with LCD display

electric energy meter / wall-mounted / with LCD display

ULYS Enerdis
The Chauvin Arnoux group subsidiary ENERDIS has created the ULYS product range. This series consists of six different electrical energy meters for the LV and MV that are in complete accordance with IEC 61036 Class 1 product standards. ...
electric energy meter / wall-mounted / digital / single-phase

electric energy meter / wall-mounted / digital / single-phase

Memo 3M Enerdis
This range of energy meters feature 3 primary characteristics reliability, compactness and accuracy. They can now be ordered in a MID Class B Variant, which is is ideal for rebilling electrical energy particularly on private networks. ...
power transducer

power transducer

T82 Enerdis
The transducers in this product series are able to convert reactive and active power into low level DC analog signals. In most situations, these devices are installed upstream of the analog or digital panel meters, recorders, programmable ...
cement analyzer / power quality / portable / measuring

cement analyzer / power quality / portable / measuring

CW240
CW240 power meter is a one-stop solution for improving energy efficiency, finding areas for improvement and assessing equipment lifecycles. This device is capable of providing in-depth information about an item of equipment, or even an ...
Partners